Metal Sheets Dealers in Gurugram

• Material: Stainless Steel
• Finishing: Polished
• Color: Silver
• Grade: SS 202
• Type: Hot Rolled Steel Sheets
• Country of Origin: India
• Surface Treatment: Polished
• Usage/ Application: Construction,Industrial
• Technique: Hot Rolled

• Size: 2.5x5.5, 2x5, 3.5x6.5, 3x6
• Material: Metal
• Shape: Rectangular
• Thickness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm
• Application: Flooring, Outdoor Furnitures, Stairs
• Feature: Corrosion Resistant, Durable, Fine Finish, Good Quality, Tamper Proof, Water Proof
• Finishing: Coated
• Width: 0-500mm, 1000-1500mm
• Country of Origin: India

• Material: Galvanized Steel
• Shape: Rectangular, Square
• Thickness: 2-5 mm
• Usage: Industrial
• Holes Type: Round
• Packaging Type: Roll
• Technique: Hot Rolled
• Elongation: 20-25%

Manufacturing hot rolled plates involves a continuous process, in which the steel slabs are rolled continuously at a high temperature --- usually over 1,000 degrees Fahrenheit. Continuous monitoring of the temperature is required at this stage to ensure that it is maintained at the recrystallization temperature. If at any stage, the temperature goes below the recrystallization temperature, then raw material has to be reheated before further rolling process can be continued. The steel slabs or sheets are passed through the roller and then cut into required sizes and after which they are cooled off. Often, these hot rolled materials possess oxides or other contaminants. These can be removed using a special treatment called pickling, which involves using an acidic solution, that lends a smooth, oxide free surface. Such hot rolled plates usually have less directionality, and at times, may have residual stress and hence these can be used in construction works where materials with defined dimension and shapes are not mandatory.

• Type: sheet
• Color: Silver
• Material: Stainless steel
• Brand Name: Jindal
• Length: 2000 mm, 2500 mm, 5000 mm , 6000 mm
• Features: Uniform thickness, Rust proof, Fine finish
• Steel Grade: JT,JSLU SD, JSLU DD,J4 , 204Cu, 201,JSL AUS, 304 ,316 L , 409 L,430 , X2CrNi12, X5CRNI18 , Duplexx
• Usage/Application: Construction
• Deal In: New only

Cold rolled close annealed steel coils are made from Hot Rolled Coils. Cold Rolling is a process through which the Hot Rolled steel sheet or strip after Pickling process is introduced between rollers by application of high pressure at temperature below the re-crystallization temperature. This method basically imparts smooth surface finish, accurate thickness, high tensile strength, yield strength hardness with corresponding decrease inductility. Hence selection of proper combination of steel composition, degree of cold working and heat treatment play a pivotal role to produce cold rolled sheets strips having diverse applications and mechanical properties suitable for a wide spectrum of end users.Rishabh METAL INDIA Processes Cold Rolled sheet in a variety of sizes, grades and surface finishes to meet specific end-use requirements. Cold Rolled Sheet is manufactured from hot rolled coils and Pickling to remove the surface oxide produced during the hot rolling stage, and cold reducing through a Cold Mill to the desired thickness.

metal perforated sheets, our manufacturing facility helps us to handle heavy demand and different specifications of metal perforated sheets in the best possible way. We manufacture it with cutting-edge technology and optimum raw components to meet international quality standards and check them in our laboratory. This is the main reason our clients have complete faith in the quality of our offered product.

• Material: Titanium
• Size: 1-5 Inch
• Thickness: 1-2 mm
• Type: 8 Hole Plate
• Usage/Application: Hospital

• Thickness: 0.09-1.6mm
• Length: 3660mm Max
• Width: 665-1100mm
• No. of Corrugation: 9-15
• Zinc Coating: 100/120/180/220/270 gm/m2
• Temper: Hard / Soft
•  :  

We offer hot dipped galvanized coil & sheets in conformity with international standard JIS G3302,(grade SGCH, SGCC), ASTM, A653.The coils have excellent corrosion consistence, portability, and workability.

• Features: Anti Corrosion, Longer life, Durability.

• Grade: 304
• Thickness: 1-2 mm,2-3 mm,4-5 mm
• Surface Treatment: Coated,hot rolled
• Type: Plate
• Material: Stainless steel
• Shape: Rectangular
• Steel grade: SS 304 & SS 202
• Sheet size (feet x feet): 8 x 4 feet

Profile is ideally suited for steel decking application both as form workpermanent shuttering for casting RCC roof on Steel Purlins as well as for composite decking for RoofFloor Slabs. The Profile geometry is custom engineered to optimize structural efficiency, economise concrete consumption and minimize extraneous usage of cement & steel. Steel decking, besides providing a safe working platform, also enables faster construction, cost savings, avoidance of messy, cumbersome shuttering & de-shuttering, props, underside plastering & painting. Steel decking is possible to cast a number of floors simultaneously.

hot rolled plates involves a continuous process, in which the steel slabs are rolled continuously at a high temperature --- usually over 1,000 degrees Fahrenheit. Continuous monitoring of the temperature is required at this stage to ensure that it is maintained at the recrystallization temperature. If at any stage, the temperature goes below the recrystallization temperature, then raw material has to be reheated before further rolling process can be continued. The steel slabs or sheets are passed through the roller and then cut into required sizes and after which they are cooled off.Often, these hot rolled materials possess oxides or other contaminants. These can be removed using a special treatment called pickling, which involves using an acidic solution, that lends a smooth, oxide free surface.

• Material: Stainless Steel
• Surface Treatment: Color Coated
• Color: Grey
• Length: 10 Feet
• Thickness Of Sheet: 0.60 mm
• Usage/Application: Residential

With the help of latest technologies, we bring forth a wide collection of Adjustable Angle Plates. Made from high quality metal alloys, these angle plates are heavy and sturdy in construction. Further, to provide them with easily adjustable features, these angle plates are available with a swivel base with 360 degree angle.Features:Longer working life.Wear resistant.

PPGL Sheets are prepared by combining the strength of steel with anti-corrosive capabilities of a metal coating like Zinc or Aluminium. It is exceptionally resistant to weather and environmental degradations and can be punched, pressed, roll-formed, or joined in any way possible per requirement. They are made in a variety of specifications to suit different applications. They are lightweight and strong for easy placement and to provide high durability. They do not crack under pressure and are made to superior quality. Our suppliers provide PPGL Sheets made using the finest machinery and highly skilled engineers. Our product is superior in quality and has a fine finishing. The steel is properly galvanised to meet industry standards and the aluminium coating is made to display high strength and tolerance.

• Finishing: Polished
• Color: SIlver
• Country of Origin: Made in India
• Features: Flawless finish , Anti-corrosive, Sturdy design
• Technique: Hot Rolled
• Corrosion Resistant: Yes

We are offering mild steel hot rolled sheet. Power2sme offers a comprehensive range of structural steelwork products like: tmt bars and re-bars, structural wire rods, steel tubes, hot rolled alloy steel coil, hot rolled alloy steel plate, hot rolled alloy steel sheet, stainless steel cold rolled (cr) coil, stainless steel cold rolled (cr) plate, stainless steel cold rolled (cr) sheet, stainless steel hot rolled (hr) coil, stainless steel hot rolled (hr) plate, stainless steel hot rolled (hr) sheet, mild steel (ms) cold rolled (cr) coil, mild steel (ms) cold rolled (cr) plate, mild steel (ms) cold rolled (cr) sheet, mild steel (ms) hot rolled (hr) coil, mild steel (ms) hot rolled (hr) plate, mild steel (ms) hot rolled (hr) sheet, galvanized steel coil, galvanized steel plate, galvanized steel sheet etc. We commit to deliver premium quality stainless steel cold rolled (cr) coil, stainless steel cold rolled (cr) plate, stainless steel cold rolled (cr) sheet, stainless steel hot rolled (hr) plate, steel hot rolled (hr) sheet, steel hot rolled (hr) coil, galvanized steel coil, galvanized steel plate, galvanized steel sheet, hot rolled alloy steel coil, hot rolled alloy steel plate, hot rolled alloy steel sheet and other stainless steel products.

Galvanized Roofing Sheets, Self Drilling Screw, roofing products

Inconel Plates, Ferrous Metal, Inconel Round Bars, Nickel Alloy Round Bars

Tantalum Foils, Copper Rod, Tantalum Bar, Tantalum Sheets, Titanium Bar

mild steel crca sheet, Coils, Color Coated Coils, Galvanized Coils

CRGO Sheets, Transformers, non ferrous scraps, Non Ferrous Metal

Perforated Metal Sheet, Crimped Wire Mesh, wire mesh manufacturing machines

Titanium Foil, reflective foil, Foils, Polyester foil

• Brand Name: Thia

Textured metal plate with flower : 100% Metal, One size fits all, Textured curve metal plate with tiny flower details

Metal Name Plates, Brass Name Plates, Glass Blocks