Oil Production Plant Dealers in Udyog Vihar, Gurugram

Fatty Acid industry is associated with production of fatty acids and glycerine. Both vegetable oils & animal fats are being used as feedstock for fatty acids / glycerine manufacturing. The fatty acids are manufactured as a distillate mixture or a pure fraction. Pure fractions can be obtained either from fractionation plantor by selectively choosing the feed-stock & carrying out straight distillation. Fat Splitting Plant In Fat Splitting Plant, hydrolysis reaction of oil / fat is carried out. The reaction takes place at high pressure and high temperature. Triglycerides (fat/oil) react with water to convert into fatty acids and glycerol. The Fat Splitting Plant is a high-pressure single tower system. The fatty matter proceeding from battery limits is pre-heated and fed to the de-aerator operating under vacuum. The de-aerated fat is fed via a high-pressure pump to the bottom of the tower. In bottom of the tower, there is a heat recovery section where de-aerated fat isheated by the exiting sweet water. The process water is fed via a high-pressure pump to the top of the splitting tower. In top of the tower, there is a heat recovery section where process water is heated by the discharging crude fatty acids. The high pressure splitting tower is provided with temperature controllers. Fatty Acids Distillation Plant Fatty Acids Distillation plant is broadly divided into three main section. vis. de-gasification, pre-cut system and main distillation system. These main process section are supported for optimum cooling based on thermostatised water system. Crude fatty acids from battery limit is filtered, pre-heated and admitted to the de-gasifying unit operating under vacuum, where it is dried and de-gasified. Crude fatty acids, from de-gasifier is heated in thermic fluid exchanger and fed to the pre-cut column. The pre-cut column operates under vacuum and is composed of various section; starting from bottom, the main sections are vaporization section, Two sections of distillation packing bed, pump-around section and scrubbing section. From bottom of the column, the product is sent to Fatty Acid Distillation column. The main distillation column operates under vacuum and is composed of various section; starting from bottom the main sections are vaporization section, stripping section, one set of washing section, one pump-around section and one scrubbing section     Soap noodles Fatty acids sourced from Palm stearin, Rice-Bran Oil, Coconut Oil, Tallow…etc. are typically blended together to form fatty acids blend for soap manufacturing. Today all premium grade soaps are being manufactured from blend of the distilled fatty acid. Mectech's Revolutionary on-line seperation system for fatty acid and glycerine phase Working principal Driving force for Static Separator is gravity flow. The Separator is a static device having highly specialized internals and level controller. The internals are so specially designed that, the disperse phase smaller droplets gets agglomerate on the surface to form bigger globules. This enhances process of separation of the two phases. Fatty Acids Distillation Column The agglomerated bigger globules represents Free Disperse Phase and is padded through an environment where sufficiently quiescent conditions are maintained, so that disperse phase globule rises to the continuous phase surface; forming a layer of disperse phase liquid. The removal of both phases from the separator is through level controller. Both phases are freely discharged under gravity. Advantages Each plant component is designed to MICRO level; hence performance of each component is controlled to the required level. Our plants are 100% custom-built and we do not sell the “standard plants”. It results in good “Turndown” Ratio for plant operation.. Customer need not compromise on his requirements. We can supply the plants of required capacities at desired parameters such as utility consumptions, operability, plant life as per customer’s request.

Deodorization is a vacuum stripping process in which a given amount of a stripping agent (usually steam) is passed for a given period of time through hot oil at a low pressure. Hence, it is mainly a physical process in which various volatile components are removed. However, since it is usually carried out at high temperature (220 to 250°C), some chemical, thermal effects may take place as well. Salient features: Most efficiently designed oil to oil heat exchanger fitted in last tray of Deodorizer ensures minimum heat energy requirement. Elaborate and efficient design of fatty acid scrubbing recovery system ensures virtually no carry over fatty acid into barometric condenser. Most efficiently designed heating coil which prevents to charring of oil during the process

palm oil refining industries are one of the most important manufacturing sectors in the world. Palm oil has become an increasingly important vegetable oil in the world market and currently it is one of the largest traded vegetable oil in the world. Indonesia & malaysia are the largest producer and exporting company of crude palm oil. crude palm oil is obtained from mesocarp part of palm oil. Extracted crude palm oil contains some undesirable impurities and these impurities need to be removed partially or completely through the refining process in order to produce good edible oil with better stability and keepability. currently, palm oil is a popular cooking oil in some tropical countries like south east asia, africa, and some parts of brazil. Its popularity is due to its higher heat resistance as compared to any other vegetable oils and also because of its lower cost and good oxidative stability.  

With modified Gear Box & Steel Barrel CAP.15/80 TPD. Heating Kettle with THREE STAGE Heating System, Complete with V Belts, Foundation Bolts & Pipe Fittings, And Motor Pulley and With Electrical. The offered expellers are used for the extraction of oil from the following seeds. Cottonseed Ground nut (peanut) Copra (coconut), mustard Canola (rapeseed) Palm kernel Sunflower Castor Linseed Sesame Soybean Maize-germ Cashew nut-shell Walnut Sheanut Kardi Tumba Neem & other oil bearing seeds/nuts

• Voltage: 415v
• Country of Origin: Made in India
• Automation Grade: Automatic
• Capacity: 600 LPH
• Material: MS
• Power Source: Electric
• Frequency: 50Hz
• Phase: 3 Phase
• Power Consumption: 10 KV
• Number Of Wheel: 4

• Color: Blue, Yellow, Red, Orange
• Material: steel
• Type: Hydraulic Breakers
• Place of Origin: Haryana, India