Pepperl Fuchs India Pvt. Ltd. Sohna Road, Gurugram, Haryana

Limit frequency 40 kHz, Voltage or current ouptput, Incrementing output (Spacing factor 1 ... 9999), Multi-range power pack, 2-, 3-, 4-wire and NAMUR sensors as well as rotary encoder connectable, Rated voltage: 200 ... 230 V AC ; 100 … 130 V AC; 50 Hz

Ultrasonic sensors are most commonly used in the diffuse mode. A single ultrasonic transducer is used as both emitter and receiver and is typically contained in the same housing as the evaluation electronics. To reliably detect difficult objects, the majority of our diffuse mode sensors can be converted to retroreflective operation via software parameterization. Some ultrasonic sensors are supplied as retroreflective sensors from the outset.

Number of cable entries:1 x M20 in face A fitted with nylon Ex e sealing plug, 1 x M20 in face B fitted with nylon Ex e cable gland.N.B. nylon plugs and glands limit lower ambient temperature to -20°C. -40°C when used with a plug and gland rated to -40°C. Double pole OFF-ON 1 Fuse rating 5A, 1 neutral link, 110 mm x 220 mm x 126 mm, Carbon loaded, anti static glass reinforced polyester.

Converters receive signals from a hazardous area instrument i.e., temperature sensors, potentiometers or load cells and then convert and condition them into signals such as 04…20mA or 02…10V.

2-channel signal conditioner, Universal usage at different power supplies, Dry contact or NAMUR inputs, Input frequency 1 mHz ... 1 kHz, Current output 04 mA ... 20 mA, Relay and transistor output, Start-up override, Configurable by PACTware or keypad, Line fault detection (LFD), Rated voltage: 20 ... 90 V DC 48 ... 253 V AC 50 ... 60 Hz

Ambient temperature :-25 ... 70 °C (-13 ... 158 °F). Diagnostic Coverage (DC):0 %.Measuring plate detected:≤ 1 mA. Measuring plate not detected:≥ 3 mA. Nominal voltage :8.2 V (Ri approx. 1 kΩ).

Ex pz purge systems reduce the classification within the protected enclosure from Zone 2 to non-hazardous. General-purpose equipment can be operated within the protected enclosure.

Our broad range of photoelectric sensors is aimed at all automation solutions where noncontact object detection can be utilized. The wide variety of different operating principles, models, sizes and specifications means that the best possible sensor can always be found for the relevant application and all conditions that occur in practice can be met. Take a look at our impressive selection of noncontact photoelectric sensors. You are sure to find the right one for you. Perfectly adapted customer-specific optical solutions are also available. Talk to us! The emitter and receiver on thru-beam sensors are aligned opposite one another. The advantage of this is that the light reaches the receiver directly and long detection ranges and high excess gain can therefore be achieved. These sensors are capable of reliably detecting almost any object. The angle of incidence, surface characteristics, color of the object, etc., are irrelevant and do not influence the functional reliability of the sensor.

For decades, Pepperl+Fuchs has been developing and distributing industrial sensors and sensor systems with the highest quality standards for use in automation technology. The diverse product portfolio offers sensors for standard applications as well as customized solutions. In close cooperation with our experts, you receive the ideal sensor system for your specific requirements! Our product portfolio of industrial sensors for factory automation is characterized by a high degree of innovation. It consists of inductive, photoelectric, capacitive, magnetic, and ultrasonic sensors. Additionally, we offer you powerful components such as rotary encoders, positioning and identification systems (RFID, Data Matrix, Barcode), AS-Interface as well as suitable accessories. Industrial vision systems and vision sensors round off the comprehensive product range.

Another important factor for the success of any industrial application are the mechanical and chemical properties of the connection technologies. Pepperl+Fuchs gives you a comprehensive overview of seven of the most frequently used types of industrial cables.

Some applications place particularly high demands on the robustness of sensors. These rugged and durable "Metal Face“ sensors are enclosed in stainless steel making them the best selection for these tough applications. Applications such as machine tools or metal processing will often expose the sensor to target impact, abrasion and the affects of aggressive solvents and fluid. In these applications, sensors with a stainless steel sensing face may reduce down time and extend service-life making your overall production more profitable. Our "Metal Face“ product series (NMB…) is available in 2 versions, (FE) for detection of ferrous metals and (NFE) for detection of non-ferrous metals.

Inductive proximity sensors are the preferred choice for the majority of applications requiring accurate, non-contact detection of metallic objects in machinery or automation equipment. As a pioneer and market leader, Pepperl+Fuchs offers innovative, high quality inductive sensors to meet the needs of the worldwide automation and process control markets. Our experience, flexibility and customer focus continues to allow us to offer custom designed solutions for the most unique and demanding applications. Standard Inductive Sensor Product features: Smooth or threaded stainless housings, Polarity reversal and short-circuit protected LED status indication, Connection styles include M8, M12 or terminal connection models.

Inclination sensors reliably detect inclination angles in plants or machinery. Due to the two-piece mounting concept, F99 series inclination sensors from Pepperl+Fuchs are extremely robust and also suited for harsh outdoor conditions. Thus, they are typically used in mobile equipment applications, such as leveling cranes or mobile work platforms, construction machinery, transport and loading facilities, or renewable energy applications. Measuring range and outputs of the F99 series can be configured individually according to the specific application requirements. For reliable inclination detection in dynamic applications, including wheel loaders or forklifts, the F99-Fusion is an ideal solution. Due to its intelligent Sensor Fusion Algorithm, the inertial measurement unit is able to compensate for external accelerations. So even if a vehicle is braking, accelerating or taking a turn, inclination is detected reliably.

Pepperl+Fuchs’ expertise in fieldbus connectivity for both factory and process automation is built on decades of experience. With new Ethernet IO modules, Pepperl+Fuchs is expanding its product portfolio with additional interfaces to industrial fieldbus systems. The new modules offer an array of innovative features to provide users maximum flexibility and efficiency. Whether PROFINET, EtherNetIP or EtherCAT, the modules support all common Ethernet protocols, and you can easily set the desired protocol type using the rotary selector on the device. Due to this multi-protocol capability, the modules are compatible with all common PLCs. This makes them easy to integrate into existing installations, independent of the type of PLC, and reduces the number of components needed. The result is lower costs and the ability to standardize plant design.

The following rotary encoder accessories are available:Mounting brackets, Couplings, Measuring wheels, Cable sockets, Cable pulls. Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forces

Agricultural harvesters are commonly used to harvest grain crops. There are several applications for industrial sensors on agricultural harvesters, as specific heights must be maintained based on the crop being harvested, feeding and level control into the harvester itself, and precision measurements while the agricultural harvester operates.