Rubber O Rings Dealers in Gurugram

• Type: O Ring Boxes
• Material: NBR
• Shape: Round
• Application: Industrial & Household Usage
• Color: Black
• Brand Name: Kesaria
• Color: Black
• Name: O- Ring Box Repair Kit

our o-ring kit contains a total of 382 pieces in 30 assorted sizes that are oftenly used in various industrial applications.the hard-wearing saffron storage case with a detailed label on the top indicating the sizes & quantity of o-ring seals in each compartment.the o-rings are made up of soft, pliable & durable nitrile rubber material (nbr). an o- ring is a loop of elastomer with a round cross-section intended to be sealed in a groove & squeezed together at the interface to block the passage of liquids or gases.it can create a static or dynamic seal.the hardness rating of our o-rings on a shore- a scale is 40~90 durometer.and can be used across a wide range of temperature from -45 to 130 degree celsius.our o-rings can bear the high impact of oil, watertightness, corrosion & have high tensile strength that makes them suitable for high dynamic loads & abrasion resistant. as well as their super pliable construction & extra thick wall design stands for long term service & durability. kesaria o-rings provide sealing & prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic & pneumatic repair & automobile etc.

• Material: Silicone
• Shape: Round
• Size: 25mm
• Brand Name: Galaxy Rubber Products
• Color: Black , Grey , Brown
• Packaging Type: Packet

• Feature: Oring size
• Brand Name: Rubber
• Brand Name: Aar
• Material: Rubber
• Shape: Round
• Color: Black
• Condition: New
• Application: Hydraulic
• Size: 10inch
• Feature: Good Quality
• Packaging Type: Box
• Type: Rubber O Rings
• Thickness: 10-20mm
• Country of Origin: India

Rubber O Rings are solid-rubber, doughnut shaped seals. When pressed between two mating surfaces, O-rings block the passage of liquids or gases. O-rings can form a static or dynamic seals. A static seal is where the O-ring does not move and is used simply for containing pressure or maintaining a vacuum. Dynamic seals can be reciprocating (like a piston and cylinder), or rotating (shaft rotating in a housing). Axial squeeze and radial squeeze are two methods for applying an O-ring. An axial squeeze is when the ring is compressed parallel to a line drawn through the centre or axis of the ring. In a radial squeeze the ring is compressed between the internal diameter (ID) and overall Diameter (OD).O-rings are typically available in standard sizes as per industry standards. When custom o-rings are required, the width or Thickness, Insider Diameter, and Outside Diameter are important to consider. Common materials of construction for o-rings include Aflas®, VITON, SILICON, HYPALON, EPDM, TPR,NBR, NEOPRENE.

Owing to our huge logistics network, timely delivery of the placed orders is always executed! The material required for preparing quality-centralized product range is sourced from the trusted places and that too after complete quality confirmation.

We are actively engaged in offering an extensive range of silicon O rings for catering the diversified requirements of our clients.

• Brand Name: Kashiean
• Material: NBR
• Hardness: 80

Material nbr - 33 types of o ring, 435 nos in one box. Range starts from 2.8mm to 49.70mm. Location of o ring box mentioned on the sticker for easy handling.

• Feature: Epdm rubber
• Brand Name: O RING
• Material: Rubber, Epdm Nbr Rm
• Shape: Round
• Color: Black, Any Colour,Black
• Condition: New
• Size: 10inch, 2inch, 4inch, 6inch, 8inch
• Feature: Accurate Dimension, Easy To Install, Fine Finish, Good Quality, Heat Resistant, Robust Construction
• Type: Rubber O Rings, Circle,Epdm
• Diameter: Any
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Country of Origin: India,India

• Brand Name: CAPTAUTO
• Material: Rubber
• Shape: Round
• Application: Connecting Joints, Pipes, Tubes
• Color: Black
• Feature: Easy To Install, Fine Finish
• Condition: New
• Country of Origin: India

Material: O-rings can be made from different types of rubber, such as nitrile (NBR), silicone (VMQ), fluorocarbon (FKM), or EPDM. The choice of material depends on factors like temperature range, chemical compatibility, and application requirements. Size: The size of an O-ring is specified by its inner diameter (ID), outer diameter (OD), and cross-sectional diameter (thickness). These dimensions are usually measured in millimeters (mm) or inches (in). Hardness: O-rings have a hardness rating, typically expressed in Shore durometer (e.g., 70 durometer). The hardness affects the O-ring's resistance to compression and flexibility. Temperature Range: O-rings have a recommended temperature range in which they can function effectively. This range varies based on the material used, and it is important to select an O-ring that can withstand the expected operating temperatures. Pressure Rating: O-rings also have a maximum pressure rating, which indicates the amount of pressure they can withstand without failing. The pressure rating is usually given in units of pounds per square inch (psi) or megapascals (MPa). Chemical Compatibility: It is essential to consider the chemical compatibility of the O-ring material with the substances it will come into contact with. Different rubber compounds have varying resistance to chemicals, oils, fuels, and other fluids. These specifications may vary depending on the specific application and industry requirements. It is recommended to contact us for precise specifications tailored to your needs.

We are offering nitrile rubber o-ring, viton rubber o-ring.

• Size: 2inch, 4inch, 6inch
• Material: Rubber
• Shape: Round
• Thickness: 10-20mm
• Application: Connecting Joints, Tubes
• Feature: Accurate Dimension, Fine Finish

Similar to Rubber Oil Seals they are also used to prevent air, water, oil, etc. from part to another.

We are offering rubber o ring. * offering custom molded rubber 'o' rings, molded to your specifications. * made of various materials like nbr, epdm, silicone, nr, neoprene, viton etc. * designed and manufactured as per given specifications of the client.

Rubber O-Rings for Drum Closures, Home Appliances & Automotive applications. Mainly manufactured in NBR, EPDM, NEOPRENE, SILICON, VITON.

• Material: Rubber
• Shape: Round
• Color: Black
• Application: Automobile Indutries
• Thickness: 2.5 mm
• Diameter: 2 inch

We are offering Rubber O Rings that are dimensionally accurate and are configured with advanced equipment. The Rubber O Rings, we offer, are durable in nature and are sturdy in construction. Union O Ring is widely appreciated for features like high tensile strength, easy to install and maintain etc.

Our clients can avail from us the optimum quality Rubber O Rings. The Rubber O Rings, we offer, are fabricate using the quality raw material that is superiority tested in compliance with industry norms. Our wide range of Rubber O Rings finds application in several industries for various purposes such as for refitting in machines to increase the functional stability, seal against variety of high temperature organic condition and chemical. Besides, the valuable clients can avail these Rubber O Rings in various sizes and different quality from us.

• Features: Compact design, Fine finish, High strength.

We are one of the transcendent Manufacturers and Suppliers of Rubber O Rings that are manufactured using the high grade rubber. We put our extra concern while manufacturing these Rubber O Rings to ensure accuracy in dimension and high efficiency. Moreover, Rubber O Rings, offered by us, are highly admired by our clients for their non-corrosive and other qualitative features. Applications AerospaceAutomotive industryMotion couplingPetrochemical industryChemical industry