SATGURU ENGINEERS Sector 33, Gurugram, Haryana

These toggle clamps have a flanged base with holes for mounting on the fixture plate. Handle remains in vertical position while clamping. Available in two types of clamping arms as shown below: U-Arm: - This is the most widely used type which permits to locate the clamping spindle anywhere along the length of the arm. BR- Arm: - This type of Arm has s Strip Arm onto which the bolt retainer can be welded by the user at any desire angle. Bolt retainer is supplied loose with this model. Standard Accessories provided with Clamp: Standard Hex, Head Clamping, Spindle assembly is provided as standard accessory with all above clamps. U-Arm models are provided with 2 nos. U-Flanged Washers also along with clamping spindle assembly and BR-arm models are provided with bolt retainers along with clamping spindle assembly.

SATGURU' Universal strap clamp is very useful for job clamping on 'T' slot table of Drilling, Milling, Shaping, Boring, Power Press & other machine tools. No supports are required at the rear of the clamp since the body of the clamp is self-positioning as the rear part rests on the table and front holds the job. The body positions itself with the help of swivel hinge pin according to the thickness of the work piece, the T-Bolt remaining in vertical position and the nut is tightened on the flattened portion of swivel hinge pin. Clamp is supplied complete with hardened T-Bolt & special nut.

Type : Universal

Material : Metal

Application : Industrial

Color : Grey

Finishing : Polished

Feature : Durable, Easy To Fit, Rust Resistant

Hardened & Tempered, Black Finish) 'SATGURU' Tapped End Clamps are straps having special threaded adjustable support at the rear which can be adjusted to required height. Most useful clamp for plastic injection moulding or pressure die casting machines where moulddie is clamped in vertical position and these clamps with screwed in adjustable support are convenient to the operator as other loose supports tend to fall down while setting. Hardened adjustable support with large diameter forged base gives rigid clamping support and ensures machine bed safety. Extra thick body of the clamp accommodates more number of threads for rigidity of screwed support. Supplied with adjustable support only. T-Bolt or Stud with Nut, Washer etc to be ordered separately.

These Studs having threaded length of side B1 shown in figure below enables use on threaded platens of moulding machines or threaded beds of presses for longer insertion in the tapped holes. These studs also have a flattened middle portion for tightening & loosening with the help of an open ended spanner.

STEPPED STRAP CLAMP (Hardened & Tempered, Black Finish) These Strap Clamps have teeth at rear matching to that of Step Blocks for the Step Blocks to be used as supports. Unlike other clamps, single piece of Step Block not a pair can be used as support with Stepped Strap Clamp

STEP BLOCKS (Hardened & Tempered, Black Finish) 'SATGURU' Step Blocks are used as adjustable supporting Blocks at the rear of the clamp while clamping the work piece. Different heights can be achieved by using combination of two different size of Step Blocks. Available in pairs (Pair consists of 2 identical Step Blocks) Combination of two Step Blocks of same or different sizes is kept as support under one Strap Clamp. But in case of use of Step Blocks with Stepped Strap Clamp, only one Step Block of suitable size is kept as support under one stepped strap clamp.

'SATGURU' Steel V-Blocks are made of tool steel, hardened, tempered & precision ground on all sides. Both sides 'V' with one clamp 1. Unbreakable Steel Clamp. 2. All Hardened & Tempered 52-56 HRC. 3. Parallelism & Squareness of all faces & ‘V’ within +- 0.005mm. 4. Inspection certificate is furnished.

'SATGURU' Steel Parallels are used as precision packing support under jobs or fixtures. Made from tool steel, hardened, tempered & precision ground in matched pairs. Matched pairs are marked with identical serial numbers. All sides are chamfered. Overall sizes are nominal.

SATGURU' Precision Sine Vice - Screw Type is used to obtain precise angles by means of gauge blocks. Apart from its use on milling and grinding machine, this sine vice can also used as a reference for inspection. 1. All hardened & tempered to 52-56 HRC. 2. All Sides Parallelism & Squareness within +- 0.005mm. 3. Inspection certificate is furnished. 4. Accuracy 5-10 Micron.

SATGURU' Precision Sine Vice - Screw Type is used to obtain precise angles by means of gauge blocks. Apart from its use on milling and grinding machine, this sine vice can also used as a reference for inspection All hardened & tempered to 52-56 HRC.,All Sides Parallelism & Squareness within +- 0.005mm, Inspection certificate is furnished, Centre distance of rollers within +- 0.005mm.,Accuracy 5-10 Micron..

'SATGURU' PushPull Action Toggle Clamps have a straight line action as the plunger moves in straight line forward & backward with easy to operate handle. The plunger moves forward and locks as the handle is moved forward and plunger also locks in retracted position when handle is moved backward. Hence these clamps can be used as push as well as pull action clamps. Hardened & ground plunger moves in precision machined bore. This Model with front base is most popular because of its rigidity due to mounting base just under the load bearing surface of plunger movement. Standard Accessories provided with Clamp: Standard Hex, Head Clamping Spindle assembly is provided as standard accessory.

'SATGURU' PushPull Action Toggle Clamp - Centre Base has its base at the centre and the bigger two sizes have more centre height than the front base model to accommodate larger work pieces. Width of the mounting base is also less in this case which makes this type of push action clamp more compact. Other Features of this clamp are same as in case of front base model. Standard Accessories provided with Clamp : Standard Hex, Head Clamping Spindle assembly is provided as standard accessory.

SATGURU' Mould Clamp is designed especially for low height applications only such as clamping of moulds on plastic injection moulding machines & pressure die casting machines. The Compact front portion of the clamp enables it to penetrate into the limited clamping area of the mould & clamp it. The positioning of forged swivel washer on required curved groove enables the operator to set the center distance between the clamping portion & the clamping bolt as per the nearest tapped hole available on platen (Where there are no T-Slots). No supports are required at the rear of the clamp as the rear portion rests on the platen & front holds the mould. Flanged nut is tightened on the swivel washer which takes care of the positioning of clamp body. These Clamps are equally useful on pressure die casting machines, hydraulic presses & power presses where low height clamping is done.

Angles can be set in 3 dimensions. Swivels 360 0 around base. The vise can be elevated through 90 0 from the horizontal to vertical. And also can be tited on its lower angle base up to 450 in both right and left,Tilting of any angle all keep the work piece stady, smooth,Particularly the clamping part of screw is strengthened by a bush made of gunmetal.

'SATGURU' Magnetic V-Blocks are precision ground V-Blocks with high power magnets. Accurately fitted magnet ensures easy movement of knob. Available in single as well as matched pairs. These V-blocks have main holding 'V' and bottom face fitted with hardened steel plates having hardness 52-56 HRC. 1. Parallelism & Squareness of all faces & ‘V’ within +- 0.005mm. 2. Most Suitable for inspection & tool room applications. 3. Inspection certificate is furnished.

'SATGURU' Levelling Jack can used as an adjustable support block for clamps and as a stopper or leveling block in fixtures or machines, as well as for levelling surface plates or other heavy duty work pieces. Its unique design does not allow the levelling screw to rotate while adjustment hence makes it suitable for fine level adjustment. It also has a heavier version of levelling jack with a heavy body and Levelling Screw & Knurled out. This Jack is specially designed for heavy castings & machines..

Low height design of these hold down toggle clamps requires less overhead clearance as the handle remains in horizontal position while clamping. Standard Accessories provided with Clamp: Standard Hex, Head Clamping Spindle assembly is provided as standard accessory with all above clamps. U-Arm models are provided with 2 nos. U-Flanged Washers also along with clamping spindle assembly and BR-arm models are provided with bolt retainers along with clamping spindle assembly..

SATGURU' Grinding Vice - Screw Type is also a precision machine vice. Body & Jaw made of tool steel, hardened, tempered & precision ground. All hardened & tempered to 52-56 HRC. All Sides Parallelism & Squareness within +- 0.005mm. Inspection certificate is furnished. Accuracy 5-10 Micron.

'SATGURU' Grinding Vice has body of one piece construction made of tool steel, hardened, tempered & precision ground. This vice can be used standing on its base, sides, end or top. Movable jaw is spring loaded for positive down hold & quick retreat. Due to downward pressure of jaw, job does not tilt while tightening in this vice. This vice can be used as a reference for inspection. All hardened & tempered to 52-56 HRC.., All Sides Parallelism & Squareness within +- 0.005mm. Inspection certificate is furnished. , Accuracy 5-10 Micron..

Material : Cast Iron

Size : Customized

Color : Any

'SATGURU' C.I. Angle Plate- Slotted is made out of high quality seasoned casting having precision ground outside faces & ends. Accuracy in Parallelism & Squareness within +-0.01mm per 200mm length Inspection certificate is furnished.

'SATGURU' Adjustable Support Plates are used as adjustable supports at the rear of the clamp. It comprises of number of plates each 2mm thick hinged together. Desired height is achieved very easily by swinging aside the required number of plates and using the remaining as support block. Different models of support plates can be stacked on each other to achieve extra height.