Testing Equipment Dealers in Gurugram

The DRM-1A™ is a lightweight and portable micro-ohmmeter designed to measure very low resistances from 1 μΩ to 200 Ω. It is the most accurate in its category. FEATURES Much lighter and handier than other equipment in its category Shock resistant, it is suitable for all types of applications: work site or laboratory The LCD display is equipped with a backlight to allow work in any conditions Weak current injection for applications that require small measurement contacts Many accessories are available for your application such as measurements on very small surfaces

  MSR145: The revolutionary mini Data Logger This thumb-sized Swiss Quality MSR145 data logger records over 2 000 000 measured values - with an optional microSD card, even over a billion measured values - and is ideal for long-term measurements. It is capable of simultaneously measuring and recording a variety of measures such as temperature, humidity, pressure, 3-axis acceleration and light. All measured values can be rapidly transferred to a PC or laptop via the USB interface or microSD card for data analysis purposes. Versatile universal data logger You have the choice between different casings, battery capacities and sensors. Additionally, you can equip your MSR logger with analogue inputs (selectable input configuration). The analogue inputs allow you to connect individual, external sensors for different measuring tasks (e.g., CO2, conductivity, pH, etc.). In addition to your MSR145 data logger you will also receive the user-friendly software for data acquisition and analysis free of charge. With a few clicks you are able to select and request a no-obligation quotation of your desired MSR145. Contact Us

we are offering vlf test set. the 20 kv pgt 20-v3.6 type and 36 kv pgt 36-v2 type versions of the portable vlf test set enable testing of medium voltage cables with extruded insulation (vpe, pe, epr insulation) and with a nominal voltage of up to 6.3/11 kv and 12/20 kv respectively. the low-load vlf method uses a low-frequency alternating voltage of 0.1 hz and a maximum of 20 or 36 kv for testing

The Relay Tester (RT100) is a Secondary Injection Test Set designed for the testing of protective relay equipment. This instrument is intended for use in high voltage substations and industrial environments.

Sturdiness, precision-analysis and reliability of our Digital Meters is accredited to their fabrication with top-notch materials & innovative techniques at our vendor’s end. If you are seeking for such a Digital Meter, at highly-modest price, we are the name to be reckoned with. We are listed amongst top Suppliers of Digital Meters from Gurgaon, Haryana. We are known for fulfilling all orders in a timely manner.

Lcr meter 6-digits of resolution at any range,20 impedance parameters to access and measure,20Hz to 1MHz frequency range,Selectable frequency error corrections,Open. short and load corrections remove parasitics.

Large 3-12" diameter gauge with color-coded easy-reading scales.Extra long heavy-duty rubber hose and 14mm 18 mm manifold adaptor.Checks for worn or defective parts in fuel pump,vauun system.

 PRC is one of the leading manufacturers and suppliers of wide range of Load data acquisition systems to suit the diversified requirements from all segments. PRC Manufactures its all products using optimum grade raw material that is sourced from our trustworthy vendors, this is developed in accordance with set industry standards. The offered data acquisition systems are enormously valued for its diverse features like durability, safe to handle, compact designs, low power consumption and longer service life.   Salient features;   Application – Suitable for Compression / Tensile Testing Machines. Display – 20 x 4 lines LCD with backlight / HMI Touchscreen based. Inputs – Strain Gauge type for Load Cell / Pressure transducers. Optical Encoder for DISPLACEMENT. Calibration – Auto Calibration for Load & Displacement. Output – Start Relay output in OFF/ON mode. Protection – Against Over load & over travel. On Screen display – Breaking Load & Displacement. Memory – to Save 255 sample results. Extra facilities – Unit Conversion, Data printing & Date and Time.

Data loggers by solare datensysteme are sought-after specialists for optimised remote monitoring of photovoltaics systems. The combination of stecagrid inverters with solar-logtm now guarantees complete monitoring of your photovoltaic system: all operating parameters, status and error messages of the connected inverters can be viewed simply and reliably. That guarantees maximum yield from your system at all times. advantages at a glance a. Guaranteed yield via comprehensive system monitoring and a wide range of alarm options b. Web-based software – no need to install programmes c. Clear presentation of the yield and system values in graphs and tables d. View data via internet connection – anywhere, any time e. Optional recording, calculation and optimisation of electricity consumption f. Comprehensive range of accessories - provides many other functions

FLIR Test & Measurement instruments are designed to meet the challenges of your industrial application. It has advanced options such as Infrared Guided Measurement, high protection ratings, data logging, and the ability to send data.     Know More: https://www.agilemicrosys.com/flir-test-measurement/

• Finishing: Color Coated

• Country of Origin: India
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: Industrial Use
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working
• Condition: New
• Frequency: 45Hz

• Brand Name: Mextech
• Model Name/Number: DIT-5100
• Resistance Accuracy: +-(5 % +- 5 Digits)
• Insulation Test Voltage: 5000v
• AC Voltage Measurement Range: 30-600 V
• AC Voltage Measurement Range Resolution: 1 V

• Condition: New

Single, dual, and multi channel Current and continuity teting instrument for LED / HEAD LAMP / TAIL LAMP with PLC, 7" TOUCH HMI, OK/REJECT indicators, and standard accessories. OPTIONAL -  1. Data logging. 2. QR Code printer and scanner. 3. Biometric access / login for operator. 4. Interlocking with electrical screwdriver and screw counter.

We M2SQUARE INDIA manufacturers of all types of Crrunt Transformer ang CBCT. CT 30/5 to 6000/5 resin cast and Naylor casing , digital Panel meters,all type of Electrical Panels

• Color: Silver
• Operating Type: Automatic
• Display: Digital
• Phase: Single Phase
• Usage: Industrial
• Application Media: Water, Any Liquid

The Fluke 325 Clamp Meter is designed to perform in the toughest environments and provide noise free, reliable results users can trust to confi dently diagnose problems. True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. Features: Slim, ergonomic design CAT IV 300 V/CAT III 600 V safety rating Hold button Soft carrying case 600 V AC and DC voltage measurement True-rms AC voltage and current for accurate measurements on non-linear signals Resistance measurement to up to 40 k? with continuity detection Product SpecificationsGENERALAC current: Range: 40.00 A / 400.0 A, Accuracy: 2 % ± 5 digits (45 Hz to 65 Hz) 2.5 % ± 5 digits (65 Hz to 400 Hz)

• Type: Portable Hardness Tester
• Display Type: Digital
• Low Battery Indicator: Yes
• Power: 2 X 1.5 V AAA (UM-4) Battery
• Operating Type: Manual
• Dimension (WxDxH): 170x6.3x82 Mm
• Usage: Hardness Testing
• Specialities: Easy To Use
• Humidity: <80% RH
• Resolution: 0.1 Hba
• Indication Error: 81
• Repeatability Error: 81

Walk-in test chambers a thermotron walk-in chamber serves as a test site for large components, assemblies, and finished products. Thermotron manufactures both panel walk-in chambers and solid walk-in chambers and can be configured as a temperature chamber or a temperature humidity chamber. a panel walk-in chamber is made from lightweight insulated panels for fast and easy installation. Outside banding helps prevent leaking and keeps moisture out of the walk-in chamber and workspace temperatures steady. Solid walk-in chambers are custom built to accommodate almost any size. They feature welded walls creating an environmental room for applications requiring controlled temperature and humidity testing exceeding 85°c. Typically, for ease of installation, a solid walk-in chamber works best in new construction buildings, areas with extremely large doors, or rooms where outside walls can be easily removed. below are some standard panel walk-in chamber sizes; however, custom sizes are available.

• Features: Brilliant performance Long running life Smooth operation Robust construction

Want to buy Max Pore & Mean Pore Test Equipment in India or abroad? If yes, so, you are at a right place, it’s because Kanwal Enterprises being reliable Max Pore & Mean Pore Test Equipment manufacturers, suppliers, and exporters based in Haryana offer this product in different custom as well as standards. We have our in-house manufacturing facility that helps us to design it as per the demand of our customer. We use modern devices in its manufacturing, and therefore, these are highly durable, reliable, and work longer in all conditions. We offer this device in all over the world at an exceptional cost. Being trustworthy Max Pore & Mean Pore Test Equipments manufacturers, suppliers, and exporters, we make sure to deliver it at your doorstep without any delay. You just need to send enquiries, and we commit to fulfill it.

• Threads: 1" BSP (M)
• Accuracy: + / - 1 %
• Burst Pressure: 580 PSI (40 BAR)

Digital Turbine meter for low viscosity fluids, easy to install in line or for end of the line applications Polypropylene Turbine measuring mechanism Electronic Display using two AAA 1.5V batteries Polyamide body and sealed electronic card make it suitable for use in severe weather conditions Display can be rotated in 4 different positions

• Brand Name: Hioki
• Features: • Identify previously undetectable defects , Detect waveforms with high precision (200 MHz high speed sampling × high 12-bit resolution).
• Model Name/Number: ST4030
• Applied Voltage: 100 V to 3300 V

A high-resolution optical power meter with a wide dynamic range covering a broad spectrum of wavelengths. Hand held optical power meter with InGaAs Detector & battery for wavelength range 800-1650nm. Measurement range -75-10dBm. Measures in watt/dBm/dB. Hand held optical power meter with Silicon Detector & rechargeable battery for wavelength range 440-900nm. Measurement range -65dBm. Measures in watt/dBm/dB.  

• Packaging Type: Wooden Box
• Display Type: Digital
• Brand Name: Wille geotechnik
• Features: User defined test procedure with advanced, Intelligent real-time PID controller to adjust the system
• Load Capacity: upto 100kN

We are a reputed and internationally renowned supplier of close loop servo hydraulic vibration shakers, high speed shock test systems, compression and drop testers, instrumented drop testers with Windows based software for evaluation of drop forces in G levels, container compression testers as per ASTM std. as well as Portable field data loggers for Shock and Vibration. Lansmont systems are equipped with the latest Digi&tal Microproceor based controllers with Touch-screen user interface and Windows based software. The machines are employed for diverse applications world -wide. Their International user list includes most of the International FORTUNE 500 companies. In India, their customers in India include CPRI and IIP.

• Features: Recharchable battery add on direct conection with electricity (AC) Automatic shutt down
• Automation: Fully Automatic
• Brand: Poct
• Model Name/Number: POC -30
• Sample Mode: Whole Blood
• Battery Life: 500 TEST WHEN FULLY CHARGE
• Packaging Type: BOX

• Warranty: 1 Year
• Power Source: Battery Powered
• Model Name/Number: HTC 20 MF
• Rated Capacity: 2000 MF