Transformers Dealers in Gurugram

• Type: Toroidal Core, Rectangular/ Square
• Material: Nanocrystalline
• Shape: Round, Rectangular/ Square
• Application: Toroidal Transformer, Transformer
• Feature: Best Quality, Minimum Core Loss, Unmatched Quality
• Country of Origin: India

The Nano Crystalline Cores are made from Iron based Soft magnetic material. These are derived from Crystalline Amorphous ribbon and subsequent heat treatment around 500-600° C .The typical grain size is only 10 nanometers hence the name Nano Crystalline.   There appears to be no limitation to the type of cores that can be manufactured from Nano Crystalline material: C-cores, E-cores , Uncased Toroids, Cased Toroids, Multiple cuts Gapped Toroids, etc.   Nanocrystalline metals Cores are ideally suited for diverse range of applications such as:- Frequency of operation is from 50 Hz to MHz range Common Applications are Switch Mode Power Supply Common Mode Choke Uninterruptible power systems Pulsed welding equipment Power inverter (e.g. solar inverter) Wind generators Frequency converter Energy Meters Current Sensors Benefits Nanocrystalline material has the potential as lower cost alternatives to the costly Cobalt-based Amorphous material in many applications. This is due to the excellent soft magnetic properties. Extremely Low Coercivity High Permeability Low Energy Losses High Saturation Flux Density

we provide high quality dry type transformers from 25 kva to 5000 kva that are widely used in the high rise buildings, off shore platforms/ oil rings, hotels, power plants, steel plants, chemical plants and so on. Our dry type power transformers are perfect for the places where safety is utmost priority as they are resistant to fire. We are counted among the prime dry type electrical transformers exporters based in india. some of the salient features of the dry type transformers are listed below: fire resistant safe lower losses that the same rating in oil high short circuit strength good overload capacity environment friendly low-cost office of installation and maintenance compact 30%smaller than oil filled transformers fast return on investment (duet energy savings and installation costs) advantages of dry type transformers zero maintenance : say goodbye to oil filterations, leaks, oil topping, replacing diaphragms, servicing accessories. fire safe : only materials used are metals, ceramics, fibreglass and resin make it highly resistant to fire. The combustible material is just 1% of the total tansformer weight. quick & easy installation/removal : no need for assembling radiators, conservator & protect radiators, conservator & protection/monitoring accessories as none are required. Site installations are faster and cheaper. energy efficient : total losses are less compared to their oil filled counterparts. Result-reduced energy bills!! locatoin near load center : can be located in workshop, basement, teerrace or any floor. Hence costly lt cable length are reduced resulting in reduced cable losses & better voltage regulation. reduceed civil costs : no need for oil soak pit, fire barrier walls. Due to absence of oil, radiators, space required and weight are less. higher reliability : no more nuisance alarms and reduced trippings since all accessories required for oil monitoring & protection are eliminated in dry type transformers. environment friendly : no oil handling, spillages, leakages. Minimal non toxic smoke in case of a fire. Easily repairable even at site. features on load stepless rolling contact ht avrs are warrantied for three years. electrical pannels surya's make all type of electrical control pannels(as per customer requirement).

Are you in search of HT Potential Transformer at wholesale rate? If yes, then contact us. We are known for supplying high performance HT Potential Transformer in market. We are offering wide range of Electrical HT Potential Transformer, which is available in different technical specifications meeting buyer’s needs and expectations. Easy installation, sturdy designs and better performance are the main features of our HT Transformer. This potential transformer is obtained from authorized vendors that ensure its better quality. HT Potential Transformer is easy to install as well.   Specification : 11 kv to 33 kv HT

• Country of Origin: India
• Type: Ht Current Transformer
• Certification: ISO 9001:2008 Certified
• Application: Control Panels, Industrial Use, Power Grade
• Feature: Electrical Porcelain
• Condition: New
• Current Type: Triple Phase

• Weight: 5-10 Tons, 10-15 Tons, 15-20 Tons
• Packaging Type: Wooden Box, Carton Box
• Overall Length: 10-15 Inch, 15-20 Inch
• Speciality: Robust Construction, Easy To Use, High Efficiency, Reliable
• Size (mm): 10mm, 20mm, 30mm, 40mm, 50mm
• Certification: ISO 9001:2008
• Finishing: Polished
• Driven Type: Electric

When generators are installed, it is common to use four pole changeover switchgear or contactors when transferring from mains to generator, resulting in the traditional neutral-earth reference being lost during transition. This can cause the phase voltages to rise alarmingly and any sensitive single phase loads could be damaged. By adding a bypass isolation transformer it allows the electrical contractor to earth the UPS output neutral, thereby eliminating this problem. Single phase bypass transformers are also installed on small systems where the client requires the UPS output neutral to be earthed.

• Material: Nanocrystalline
• Shape: Round, Toroidal,Rectangular
• Power: 1-5kw, 10-15kw, 15-20kw, 20-25kw, 5-10kw
• Application: Toroidal Transformer, Transformer, CT,Split CT,Welding,Filter,Choke
• Feature: Best Quality
• Type: Toroidal Core
• Country of Origin: India

PRC offers wide range of LVDT to suit various laboratory requirement pertaining to the displacement measurement. These LVDT’s are available in two options such as AC to AC and DC to DC voltage/current.   Technical Specification: Application – Linear position measurement Excitation voltage – 2-10 V AC/DC Stroke – 5 mm to 500 mm Hysteresis (mm) – 0.25 Repeatability (mm) – 0.08 Linearity (% FS) – ± 0.05 / ± 0.10 Material of construction – SS / Aluminum Housing – Suitable housing provided Protection – IP-66 Operating temp. Range (°C) – -20°C~+55°C Digital Displacement Indicators   Application- Linear measurement Display- 5 / 6 Digit 7 Segment display. Inputs- LVDT Calibration- Auto Calibration Output- 2 Set point Relay output / 1 Relay output Protection- Against Over travel On Screen display- Displacement Function mode- Unit conversion & Peak hold function Keypad- 4 keys to enter parameters.

We provide 125 kva 110.433 kv copper wound oil cooled three phase distribution transformer it is acclaimed for features like corrosion resistance, sturdy construction and long life span. The transformer is outstanding in performance and is widely used for induction heating purposes.

We manufacture quality Step Up / Step Down transformers up to 10 MVA capacity in Air/Oil cooled type having various voltage and current ratings as per the relevant IS standard. Besides all standard fittings as specified in IS standard, optional fittings such as low/high frequency, short circuit and overload protections / cutoffs can be provided as per customer’s requirement.     Ranging up to 10 MVA Capacity Upto 33 KV Class (HV / LV Voltage Ratio as per requirement) Single / Dual Ratio Three Phase / Single Phase, 50 / 60 HZ Filled with ISI marked Transformer Oil Insulation Class A or as per request Naturally (ONAN) or Forced (ONAF) Air Cooled   Conventional or Multi-tap Custom Construction Tanks with Elliptical Tube Radiators / Press Steel Radiators or Corrugated Tanks Available with OLTC, RTCC & AVR Low Losses Accessories / Fittings as desired by Customer In Accordance with IS, IEC, BS and ANSI Standards, others on request

We are offering amorphous metal gapped toroidal cores. High current carrying capacity. Linear permeability vs frequency. High saturation flux density. Better temperature stability, lower temperature rise.

At a Glance Dry type & Cast resin upto 10MVA, 33 kV class 1st company to manufacture Dry Type/Cast Resin Transformers Technical collaboration with Dupont, USA Design tested at CPRI as per IS 2026, IS 11171, IEC 60726 & CBIP ISO 9001:2000 accredited by UKAS Proven high product reliability Approved with all leading consultants & major supplies to steel plants & thermal power plants MLRE Dry Type Transformer HV & LV wound coils are separated by means of fiber glass cylinders & supported on the frame by special porcelain supports. HV coils are made in disc form, using enameled & fiberglass covered copper strips. All conductors are treated with Polyesteramide resin during covering stage to achieve inter-turn di-electric strength of 6-8KV & eliminating trapped mechanical forces during the thermal operating cycle. Product Range Dry Type Transformers upto 4MVA, 11KV class Oil Type Transformers upto 20MVA, 33KV class Multi Tap Transformers upto 24taps Reactors & Chokes Converter Duty Transformers

• Brand Name: Prime Meiden
• Power Transformers: Upto 765 KV
• Product Type: Power Transformers

• Type: Toroidal Core
• Material: Nanocrystalline
• Shape: Round
• Application: Toroidal Transformer
• Color: Silver
• Feature: Best Quality, Minimum Core Loss, Unmatched Quality
• temperature: 500-600° C

The Nano Crystalline Cores are made from Iron based Soft magnetic material. These are derived from Crystalline Amorphous ribbon and subsequent heat treatment around 500-600° C .The typical grain size is only 10 nanometers hence the name Nano Crystalline.

• Working Frequency: 50 Hz
• Speciality: Easy To Install, Four Times Stronger, Superior Finish
• Usage: Power Supply
• Power: 30 Kv
• Warrenty: 2years
• Temperature Capacity: High Temperature
• Supply: AC

We are the main supplier of this product.

• Stroke: +/-5mm to +/-“5OOmmand more.
• Linearity: 0.05% onwards.
• Package: Upto IP-68
• Operating at: -60 to +150 deg C, upto 1000 bar pressure

LVDTs are very high precision inductive sensors, excellent for use in harsh and demanding environments. Our LVDTs perform at high temperature and different pressure ranges, as well as at high accelerations and measuring cycles. Our LVDTs offer ultimate reliability and precision in a compact size and is designed for strategic and industrial applications.

C-Cores and E-Cores are manufactured with iron-based amorphous Alloy. Their unique combination of low loss and high saturation flux density take advanced power conditioning applications to higher performance levels than previously possible with conventional ferromagnetic materials.

• Voltage: 230V
• Phase: Single Phase
• Application: Energy Meter, Voltage sensing for transducer, Relay Protection etc
• Frequency: 50-60Hz
• Current: 1mA
• Power: 0.2VA
• Mounting: PCB mount

• Country of Origin: Made in India
• Power: 415 Volts and 11 KV
• Material: Copper
• Capacity: 5 KVA to 2 MVA

• Brand Name: metal world
• Features: Rigid structure, Corrosion resistance, Excellent strength, Durable
• Color: as per require
• Size/Dimension: as per requirment

used transformer, Instrument Transformers, transformer oil filter machine

Powerzone transformer oils are widely used in power transformers, oil immersed circuit breakers and switchgear. We serve all major consumers like State Electricity Boards Transformer Manufacturers, giant industries and utilities. Our Transformer Oil is regularly tested at our fully equipped laboratory and is also periodically checked at reputed independent laboratories recognized by the Government. PROPERTIES Good dielectric properties resulting in minimum power loss. High resistively gives better insulation values between windings. High flash point resulting in low evaporation losses due to high thermal stability. Excellent interfacial tension for quick water separation. Proven resistance to electrical stresses. High electrical strength. Low viscosity improves cooling. Remarkably low sludge& acidity formation in both ageing & oxidation tests. Gives longer life to oil and equipment during storage and service.

electrical substation transformers, stainless steel substation transformers

variac, Bicycle Dynamo, Automatic Chemistry Analyzers

buck boost transformer, automatic sequence phase corrector

Oil cooled Transformer, convertor, wind mill transformer

transformer oil cooler, Compressor oil cooler, Transmission Oil Cooler

Transformer Cores