Usha Amorphous Metals Limited Udyog Vihar, Gurugram, Haryana

Square Loop Cores manufactured with cobalt based amorphous alloy allow the design of mag amps that can operate at higher frequencies than previously possible.   Their combination of magnetic properties enable mag amps to provide unparalleled precision and efficiency in output regulation.

High Precision Current Transformer Cores are manufactured with Fe based Nanocrystalline material. The core have unique combination of Moderate Saturation Induction, High Permability, Good Temperature Stability and Low Cost. Applicable for Measuring Current and Voltage Transformer having .2, .2S and .1 accuracy class.

The cores are manufactured with Nanocrystalline metal. These cores provide High Saturation Flux Density and very low losses. Suitable for Power Transformers or Inductors used in high frequency applications.

The Nano Crystalline Cores are made from Iron based Soft magnetic material. These are derived from Crystalline Amorphous ribbon and subsequent heat treatment around 500-600° C .The typical grain size is only 10 nanometers hence the name Nano Crystalline.   There appears to be no limitation to the type of cores that can be manufactured from Nano Crystalline material: C-cores, E-cores , Uncased Toroids, Cased Toroids, Multiple cuts Gapped Toroids, etc.   Nanocrystalline metals Cores are ideally suited for diverse range of applications such as:- Frequency of operation is from 50 Hz to MHz range Common Applications are Switch Mode Power Supply Common Mode Choke Uninterruptible power systems Pulsed welding equipment Power inverter (e.g. solar inverter) Wind generators Frequency converter Energy Meters Current Sensors Benefits Nanocrystalline material has the potential as lower cost alternatives to the costly Cobalt-based Amorphous material in many applications. This is due to the excellent soft magnetic properties. Extremely Low Coercivity High Permeability Low Energy Losses High Saturation Flux Density

Type : Toroidal Core, Rectangular/ Square

Material : Nanocrystalline

Shape : Round, Rectangular/ Square

Application : Toroidal Transformer, Transformer

Feature : Best Quality, Minimum Core Loss, Unmatched Quality

Country of Origin : India

UMNCC-cores are manufactured with nanocrystalline iron based amorphous alloy. These cores provide high saturation flux density & very low losses as compared to the other conventional magnetic material. These cores are suitable for power transformer or inductor used in high frequency application.   High saturation Flux density (1.25T) Low temp rise due to very low losses Very Low core loss- 1/4th of iron based amorphous Very low audible noise

Toroidal Choke Cores are manufactured with Fe based Amorphous metal ribbon. The combination of Ultra High Induction, High Saturation Induction, High Energy Storage capability and low core loss for high frequency magnetic components which are significantly smaller than conventional components. Applicable at DC output inductors, Power factor correction chokes, Differential mode input chokes, Flyback Transformers.

Iron Based Amorphous Toroidal Choke Cores   Toroidal choke cores are manufactured with iron-based amorphous alloy Metal Ribbon. They offer a unique combination of ultra-high saturation induction, high energy storage capability and low core loss for high frequency magnetic components which are significantly smaller than conventional components.

Blocks are manufactured with iron based amorphous alloy.These blocks offer a unique combination of high saturation induction, high permeability and low losses.These Blocks can be arranged in different layouts. Output Filter or Inductor cores in High Frequency & High Power (generally >50KW), Solar, Hybrid Automobiles, Railway Powers and wind inverter.   Amo – Amorphours Nano Nanocrystalline XXX Block Lenth, Width & Hieght Respectively

Manufactured with Fe based Amorphous Alloy. The unique combination of Low Loss and High Saturation Flux Density takes to the advance power conditioning applications to higher level then previously used Ferromagnetic Materials.

C-Cores and E-Cores are manufactured with iron-based amorphous Alloy. Their unique combination of low loss and high saturation flux density take advanced power conditioning applications to higher performance levels than previously possible with conventional ferromagnetic materials.

Manufactured with Fe based Amorphous Alloy. The unique combination of Low Loss and High Saturation Flux Density takes to the advance power conditioning applications to higher level then previously used Ferromagnetic Materials. Applicable in SMPS, UPS power factor correction chokes, Harmonic filter inductor, High speed rail power systems, Welding power supply. It has high saturation flux density of 1.56T, Low Loss resulting from micro thin ribbon, Low temperature rise- enabling smaller compact design.

Size : UMCCC 100

Brand Name : UAML

Material : AMORPHOUS

Shape : Toroidal, Rectangular

Application : CT, Split CT, Welding, Transformer, Filter, Choke

Density : 7.25

Usage/Application : High Frequency, 50Hz