Vardhman Hoses Pvt Ltd. Sector 1, Gurugram, Haryana

Conforming to IS-638/1979 : CM/L - 8361375 Application: Used between flanges and similar joints subjected to water, steam & air pressure. Composition: Natural/synthetic/blend rubber is used in manufacturing of sheet rubber jointing and rubber insertion jointing free from surface defects, porosity and grit. Fabric Reinforcement: The reinforcement fabric used for rubber insertion jointing having minimum breaking load of 120N/cm (approx. 12kgf/cm.) for both warp and weft direction. Thickness in (mm) Tolerance on Thickness (mm) No. of Plies 0.8 ± 0.2 1 1.5 ± 0.2 1 3.0 ± 0.3 2 5.0 ± 0.5 2 6.0 ± 0.6 3 8.0 ± 0.7 4

Type : Conforming to IS-638/1979 : CM/L - 8361375

Brand Name : Vardhman Insertion Sheet

Grade : Conforming to IS-638/1979 : CM/L - 8361375

Country of Origin : Bhiwadi, Rajasthan

We are an 9001: 2008 certified manufacturer of All kind of Rubber Hoses, Rubber Sheets, Rubber Mats, PVC Braided Hoses, PVC Water Stop Seals i.e. Water Hose, AirPneumaticRock Drill Hose, Fly Ash Hose, SandShot Blast Hose, Chemical Hose, Water Suction Hose, Oil Decanting Hose, Car Washing Hose, Carbon Free Hose, Food Grade Hose, Steam Hose, Rubber Electrical Insulating Mats, Natural Rubber Sheet, Synthetic Rubber Sheet, NeopreneNitrile Rubber Sheet, SandShot Blast Sheet, EPDM Sheets, Para Floating Sheets, Sponge Rubber Sheets, Silicon Sheets, Anti- vibration pads and other rubber molded products.

Material : Stainless Steel

Shape : Round

Chemical Designation-Natural Poly Isoprene Good For:- Natural Rubber has many good characteristics. It has high resilience, good compression set, high tear strength, high Abrasion resistant, low crack growth. Bad For:- Natural Rubber is not recommended for oil and solvent resistance. Thickness - 0.5mm to 50mm Width - Up to 1200mm Length - Continuous length Color - Black, Red or in desired color Temp. - -20deg.C to +80deg.C Hardness - Shore A 40 to 85 Tensile Strength - ≥2Mpa Elongation - ≥180% Surface can be smooth or fabric impression. Insertion available as per requirement.

Type : A

Brand Name : Vardhman Natural Rubber Sheet

Grade : A

Country of Origin : Bhiwadi, Rajasthan

We are an ISO 9001:2008 certified prominent manufacturers of “HIGH VOLTAGE INSULATION MAT, ISI MARKED CONFIRMING TO IS: 15652-2006”. -Importance of High Voltage Insulation Mats: Safety Mats provide a safe guard to the life of Human Beings working in any possible area of possible current leakage. -Application of High Voltage Insulation Mats: Electrical Insulation mats are highly recommendable in all possible areas of electrical shock such as-Sub-Stations, Transformer Rooms, Lift Machine rooms, electrical Switch Gears, Bus Bar areas, AC Plant rooms and LT/HT labs. Our other range of products includes all types of Industrial/Hydraulic Hoses and rubber sheets which are designed and manufactured in conformity by BIS such as IS: 444, IS: 446, IS: 3549, IS: 5424, IS: 15652, IS: 638 and many BS (British Standards), IEC, AS, SAE Specifications.

We are specializes in manufacturing of various types of rubber sheet. The wide ranges of the sheets are designed in lieu of providing ready solution to every unique demand emerging in the world market. Vardhman Sheets offers following features- High temperature Resistance Abrasion Resistance High Tear Strength Acid & Alkali Resistance Low temperature Resistance Suitable for water proofing Electrical shock Proof With or Without Insertion Different Patterns Dimensions Thickness- 0.5mm (1/2”) to 50mm (2”). Length-Continuous lengths up to 30000mm (30Mtrs.) or in desired length. Width-Up to 1200mm (4Feet). Color-Standard Black, Blue, Red or in desired color. Packing-Roll Type in Laminated H.D.P.E. Fabric.

Type : Class A, Class B. Class C, Chequered Type

Brand Name : Vardhman Electrical Insulating Mat

Grade : A

We are one of the chief Manufacturers and Exporters of Electrical Insulating Mats. As our Electrical Rubber Mats are IS: 5424/1969 certified, they are ideal for electrical purpose. Our Electrical Rubber Mats are used as floor covering around electrical panels as a safeguard to the life of the workers due to possible leakage of current and short circuit. Electrical Rubber Mats are used in power generation plants, sub-stations, workshops, etc. These rubber mats are manufactured by special rubber compound, free from fabric insertion and fibrous material to serve your purpose of safety at its best. Surface Ribbed, fluted, chequered, plain any other desired pattern. Thickness 6.5mm, 8mm, 10mm, 12.5mm, 20mm, 25mm. Size 3feet X 6feet, 4feet X 8feet, 1mtr X 2mtr. Color Black, Red, any desired color. Hardness Shore A 40 to 85 On Request We Provide Inspection facilities In house and government laboratory test certificates of the product Pasting and fixing as per requirement Class Max. Use Voltage (KV) AC Proof Voltage (KV) Di-electric Strength (KV) Thickness A 3.3 10 30 2.0mm B 11 22 45 2.5mm C 33 36 65 3.0mm Dimensions Form Rolls or Mat Length 2M / 5M / 10M / 20M Width 3 Ft.(900 mm)/1M/1.2M" Color Other Colors as per request Red / Black / Blue Thickness For special outdoor applications, the mats can be supplied with higher thickness with confirmation to IS15652-2006 2mm, 2.5mm, 3mm.

Type : IS 15652-2006 / IS 5424, Class A/B/C

Brand Name : Vardhman Electrical Insulating Mat

Grade : A/ B/ C

Color : Blue/ Red / Black

Length : 2M / 5M / 10M / 20M

Width : 3 Ft.(900 mm)/1M/1.2M"

Country of Origin : Bhiwadi, Rajasthan

We are one of the chief Manufacturers and Exporters of Electrical Insulating Mats. As our Electrical Rubber Mats are IS: 5424/1969 certified, they are ideal for electrical purpose. Our Electrical Rubber Mats are used as floor covering around electrical panels as a safeguard to the life of the workers due to possible leakage of current and short circuit. Electrical Rubber Mats are used in power generation plants, sub-stations, workshops, etc. These rubber mats are manufactured by special rubber compound, free from fabric insertion and fibrous material to serve your purpose of safety at its best. Specifications Surface Ribbed, fluted, chequered, plain any other desired pattern. Thickness 6.5mm, 8mm, 10mm, 12.5mm, 20mm, 25mm. Size 3feet X 6feet, 4feet X 8feet, 1mtr X 2mtr. Color Black, Red, any desired color. Hardness Shore A 40 to 85

Type : IS 15652-2006 / IS 5424, Class A/B/C

Brand Name : Vardhman Electrical Insulating Mat

Grade : Class A , B , C

Color : Blue/ Red / Black

Length : 2M / 5M / 10M / 20M

Width : 3 Ft.(900 mm)/1M/1.2M"

Thickness : can be supplied with higher thickness with confirmation to IS15652-2006

Country of Origin : Manufacturing Plant in RIICO Industria Area, Bhiwadi

We manufacture rubber hose for sand / shot blasting. As per is: 5894:1980 application: for conveying sand, shots or other abrasive materials used in ordnance factory, steel fabrication, shipyards, manufacturing workshops, heavy engineering industries, gas cylinder manufacturing units etc. Construction: lining : uniform seamless tube of natural/synthetic/blend rubber compound of high tensile strength, excellent abrasion resistance and free from air blister, porosity and other defects. reinforcement : plies of rubber impregnated woven textile or braiding of high strength natural/synthetic fibre. cover : suitable rubber compound of cloth marked finish resistant to abrasion and weather. electric bonding : a strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose. Pressures: type 1 - w. P. 0.7 mpa & b. P. 3.5mpa. type 2 - w. P. 1.0 mpa & b. P. 5.0mpa. Nom. Bore in (mm) tolerance on nom. Bore (mm) min. Thk. Of lining (mm) min. Thk. Of cover (mm) 20.00 ± 0.75 6.3 1.50 25.00 ± 1.25 6.3 1.50 31.50 ± 1.25 6.3 1.50 38.00 ± 1.50 6.3 1.50 45.00 ± 1.50 6.3 1.50 50.00 ± 1.50 6.3 1.50 w.p. :working pressure, p.p. : proof pressure, b.p. : burst pressure, 1mpa : 10.2kgf/cm2 1kgf/cm2 :100kn/m2 length : mandrel made hose upto 20 mtr., moulded braided hose in continuos long length.

We manufacture rubber hose for sand shot blasting. As per is: 5894:1980 application: for conveying sand, shots or other abrasive materials used in ordnance factory, steel fabrication, shipyards, manufacturing workshops, heavy engineering industries, gas cylinder manufacturing units etc. Construction: lining : uniform seamless tube of naturalsyntheticblend rubber compound of high tensile strength, excellent abrasion resistance and free from air blister, porosity and other defects. reinforcement : plies of rubber impregnated woven textile or braiding of high strength naturalsynthetic fibre. cover : suitable rubber compound of cloth marked finish resistant to abrasion and weather. electric bonding : a strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose. Pressures: type 1 - w. P. 0.7 mpa & b. P. 3.5mpa. type 2 - w. P. 1.0 mpa & b. P. 5.0mpa. Nom. Bore in (mm) tolerance on nom. Bore (mm) min. Thk. Of lining (mm) min. Thk. Of cover (mm) 20.00 ± 0.75 6.3 1.50 25.00 ± 1.25 6.3 1.50 31.50 ± 1.25 6.3 1.50 38.00 ± 1.50 6.3 1.50 45.00 ± 1.50 6.3 1.50 50.00 ± 1.50 6.3 1.50 w.p. :working pressure, p.p. : proof pressure, b.p. : burst pressure, 1mpa : 10.2kgfcm2 1kgfcm2 :100knm2 length : mandrel made hose upto 20 mtr., moulded braided hose in continuos long length.