Xylem Analytics Sector 53, Gurugram, Haryana

All of Global Water's electronic sensors seamlessly interface to the EZ100 Sensor Display, which can be used for both portable and permanent installations. Global Water's EZ Display features a large LCD readout that can be configured to display 4-20mA electronic sensor output values in any engineering units. The portable display is housed in a rugged, weatherproof enclosure that can be either hand held or wall mounted.   Seamless interface with 4-20mA electronic sensors Large LCD readout can display sensor output in any engineering units Can be used for both portable and permanent installations Rugged, weatherproof enclosure The Global EZ Display comes with two installation options: Battery powered for portable hand-held or stationary applications (when no power is available). In this mode, the display stays on for as long as the display button is pushed. External 18VDC power for continuous monitoring applications. In this mode, the display is on permanently and the 4-20 mA signal can be used to interface with process control systems or dataloggers.

Global Water's WL500 Well Level Sounder sets a new precision standard for well water level measurement. The Water Level Sounder meets or exceeds federal specification US GGG-T-106E (USA) or EEC CLASS II (Europe) for a guaranteed accuracy of 0.008%. The Water Level Sounder uses a full depth-rated stainless steel and teflon probe that is 58-inch (16 mm) in diameter. Sensor electronics are encapsulated in a water and dust proof housing. The Electronics module can be removed so that the entire reel and tape can be cleaned and decontaminated. The flat spring steel core ensures that the level sounder will hang perfectly straight in large and small diameter wells. This provides unparalleled accuracy when compared to the flat white tapes, where kinks in the tape introduce slight errors, in addition to the displacement of water changing the static level.

The WL16, Water Level Logger, is a datalogger and submersible pressure transducer combination designed for remote monitoring and recording of water level or pressure data. The water level logger can record over 81,000 readings and has four unique recording options, fast (10 samples per second), programmable interval (1 second to multiple years), logarithmic, and exception. Multiple depth ranges are available from 3 to 500 feet of water level change. A 25 ft vented cable is standard on all water level loggers, and optional cable lengths are available from the factory up to 2000 ft.   Four sample modes: 10 times per second, timed, logarithmic, and exception CE Certified User friendly software included USB and Serial communication options available Serial version is telemetry compatible PDA software simplifies field data collection No need to remove sensor for data collection or battery change Highly accurate water level measurements User programmable start and stop alarms, engineering units, and field calibration setup Unique 0-3 ft range for shallow water Wet-wet transducer eliminates vent tube concerns Automatic barometric pressure and temperature compensation The WL16, Water Level Logger, is housed in a weather-resistant cylindrical enclosure, which slips inside a standard 2-inch PVC pipe. The Water Level Recorders are easily adapted with standard hardware for wellhead mounting, stream, or other installations. Two internal 9 VDC Alkaline batteries will typically power each of the Water Level Loggers for approximately one year even if one of the batteries fails. A third onboard lithium battery ensures your data is safe in the event both 9V batteries fail. All Water Level Loggers include Windows and PDA software, allowing easy upload of data a laptop, desktop or PDA for transfer to spreadsheet programs. NOTE: The Palm operating system is NOT supported.  The WL16, Water Level Logger's vented submersible pressure transducer is fully encapsulated with marinegrade epoxy. The electronics are encapsulated so that moisture can never leak in through O-ring seals or work its way into the vent tube and cause drift or sensor failure, as is the case with many other vented sensors. The vent tube is sealed directly to the wet-wet sensing element, and any moisture that may enter the vent tube from the housing will only contact the ceramic parts, not the electronics. Most federal agencies, universities, and environmental consultants recommend vented water level sensors for the best monitoring results.

Designed with simplicity in mind, the Amazon bubbler is the ideal system for long-term, water level monitoring sites. It can be used as a stand-alone system with internal data storage, or as a sensor connected to any manufacturers data logger. Easily configure and collect data using the browser-based graphical user interface with all standard web browsers on PCs, tablets and smart phones. It's rugged build, and technologically advanced system makes the Amazon Bubbler an attractive solution for real-time monitoring and data collection.   The Amazon provides a continuous air bubble and an integrated pressure sensor that measures the pressure required to push the bubble out of the orifice line, which is the line pressure. The line pressure value measured in psi is then converted into the desired units of measurement to represent water level. The Amazon can be used as a stand-alone unit or sensor with a full suite of communication protocols including SDI-12, MODBUS via RS-485 or TCP, and 4-20mA. The Amazon requires no special software and is easily configured with an optional display and or web browser GUI. YSI's water level team of professionals have been providing bubbler support for over 20 years. Key features unique to the Amazon Bubbler System: Stand Alone System - The Amazon can be used as a sensor connected to other recorder devises; data logger, PLC, RTU, etc. However, at a substantial cost savings, it can also be used as a stand-alone device, eliminating the need of an external recording device. Data values recorded by the Amazon can be copied directly to a USB Flash Drive and imported to the PC. Browser Based Software - The Amazon's initiative, easy to use software is browser based, which eliminates the need for proprietary software being installed on the PC. Access the Amazon software from any internet device that has Wi-Fi or USB connection functionality. Key Pad Display - As an optional interface, the Amazon uses a Sharp® Memory LCD display. This provides the convenience of continuous display of data with the cost savings of low power usage. The display is provided as an option to the Amazon. For applications where an external display is not required, the Amazon can be purchased without the display. Communication - Multiple communication options are available to insure that the Amazon can interface with any data logger, PLC, or RTU. These options include; SDI-12, MODBUS (over IP or RS-485), and 4 to 20 mA. Via the Ethernet port, the Amazon can push data over the internet directly to Storm Central, our data hosting solution. Measurement Range - Three range options are available to provide the highest measurement accuracy. With an industry leading accuracy of 0.02% of Full Scale; the 0 to 10 m range provides an accuracy of ±2 mm, the 0 to 20 m range has an accuracy of ±4.25 mm, and the 0 to 35 m range has an accuracy of ±7 mm.

The auto sampler AVS®Pro III is a fully automatic measuring station for determining the viscosity of Newtonian liquids using capillary viscometers. Despite its high sample throughput, the AVS®Pro III is characterized by its high accuracy and reproducibility, even though working with the AVS®Pro III is simple and allows unattended day and night operation.   The AVS®Pro III helps to considerably reduce the workload of qualified employees, particularly when working with time-consuming series measurements. A further advantage is the increased degree of safety that is achieved by the fully automatic measuring procedure when aggressive media such as sulfuric acid are used. The use of the ProClean system and micro-dosing makes routine operation even safer. Filtration of the solutions, which is sometimes hazardous, is no longer necessary. With its high performance and reliable functioning, which has been practically demonstrated in continuous use, the AVS®Pro III has established itself in a very short time as an essential instrument for daily use, particularly in the oil and plastics industries. The autosampler AVS®Pro III works according to the capillary method, the most accurate physical method for determining the viscosity of Newtonian liquids. It can achieve an accuracy of better than 0.1%. The possibility of using viscometers with optical and TC sensors means that an extraordinarily wide range of applications can be covered; these include the measurement of both transparent liquids and opaque crude oil products.

The YSI 6951 Pontoon Vertical Profiling System offers user-programmable sample intervals, redundant error recovery logic that detects unexpected activity and recovers automatically, and is compatible with all YSI EXO and 6-Series sondes equipped with depth.   Vertical Profiling Systems HIGH RESOLUTION VERTICAL WATER COLUMN MEASUREMENTAvailable in three different deployment configurations - Fixed, Pontoon, and Buoy - YSI Profiler Systems provide reliable, fully-automated data collection. Submersible enclosure for electronics Compatible with all EXO or 6-series sondes equipped with depth User-selectable sample intervals Profile Wizard software for easy set-up and deployment. Based Configurations Feature: Submersible, water-tight enclosure for control electronics Optional depth sounder which automatically compensates for varying water levels from tides, resevoirs levels, etc. Uses top and bottom as reference points for software controlled positioning Profiles up and down and parks at any depth Redundant error recovery logic detects unexpected activity and recovers automatically Applications Include: Drinking Water Reservoirs: water quality, homeland security, salinity, DO, pH Research: upwelling events, open water General Monitoring: lakes, rivers, estuaries,

The Global Water FM500 ultrasonic flow meters provide accurate and trouble free flow metering for a wide range full pipe applications including: potable water, raw wastewater, effluent, well water, slurries, or virtually any sound conducting liquid. The FM500 ultrasonic flow meter incorporates the latest ultrasonic technology to give you an accurate, easy to use hybrid flow meter with selectable Doppler or transit-time operating modes With its quick and easy clamp-on transducer installation, factory pre-configuration and user programmable menu driven interface, the ultrasonic flow meters are a snap to commission in the field. The reliable FM500 ultrasonic flow meters use custom algorithms and DSP technology to ensure high accuracy flow metering, and the proprietary AGC (Automatic Gain Control) algorithm eliminates the need for manual gain adjustments. Clean or dirty water applications with selectable modes Quick and easy setup and operation Clamp-on transducers never contact process liquid Built in data logger downloads to standard SD card Fully configurable analog and pulse outputs Ultrasonic Flow Meter's Great FeaturesLoaded with the features, the FM500 ultrasonic flow meters include: five programmable and password protected configurations for multiple user and portable applications, an easy to read 320 x 240 pixel backlit LCD display, data logging to standard SD Card format (user configurable to time interval, flow rate and total set-point triggers), isolated 4-20mA analog and 0-1000Hz pulse outputs. Ultrasonic Flow Meter's Optional FeaturesOptional features include: three configurable relay outputs and a communications package that allows the ultrasonic flow meter to connect to your computer via RS-232, RS-485, USB or Ethernet. The ultrasonic flow meter's communication package also permits remote access and control of all functions including real-time display, system configuration, data logging, remote data capture and process control functions. The software included with the ultrasonic flow meter's communication package allows remote internet access through a local network set-up. Custom Configured Ultrasonic Flow MetersThe FM500 ultrasonic flow meters can be configured for your specific pipe and process liquid application so that it is ready to go out of the box. We will need the following information for configuration purposes: Pipe size (ID), material and schedule (EG: 3 inch schedule 40 PVC) Process liquid being measured (EG: raw wastewater) Volumetric and time units to be displayed (EG: US gallons/minute) Language displayed (EG: English) How The Ultrasonic Flow Meters WorkThe Sonic-Pro series Hybrid Ultrasonic Flow Meters can measure fluid flow in virtually any fluid in which sound waves can travel. The Ultrasonic Flow Meters are considered "hybrid" because they can measure fluid flow using either the Doppler or Transit Time methods. The Sonic-Pro ultrasonic flow meter's sound transducers are clamped to the outside of the pipe wall and include no moving parts. This method of flow measurement is safe, non-intrusive and very easy to service. The Ultrasonic Flow Meter's Doppler measurement method requires particles be present in the flow stream to "reflect" the sound waves. The ultrasonic flow meter may not read flow correctly when using the Doppler mode if the fluid contains no particles. For best results 0.02% to 15% (200 to 150,00 ppm) particles should be present in the flow stream. The Ultrasonic Flow Meter's Transit Time measuring method requires relatively "clean" fluid to enable the sound waves to complete their circuit. The Ultrasonic Flow Meters may be operated in the Transit-Time mode when the fluid contains 0% to 10% (0 to 100,000 ppm) of particles. To allow for changes in the fluid's particle count, the Sonic-Pro Ultrasonic Flow Meters monitor the signal gain and employ an Automatic Gain Control (AGC) algorithm that periodically adjusts the gain to maintain the optimum power level. The speed at which sound travels in the fluid must be known. The factory will configure the ultrasonic flow meter for a known fluid during the initial configuration. The Sonic-Pro Ultrasonic Flow Meters include a 5-button user interface that can be used to configure the meter. Many common fluids are listed in The Ultrasonic Flow Meter's software and can be selected directly from the menu. Provided the speed of sound in the fluid is known, custom "unknown" fluids can be input into the ultrasonic flow meters manually by the user. A list of various fluids and their sound speeds are provided in the ultrasonic flow meter's user manual.

Get more from your analysis with the Aurora 1030C TOC Analyzer, an instrument designed to process aqueous samples for the analysis of total organic carbon (TOC) using the high temperature combustion technique. Capable of processing up to 300 samples daily, the Aurora 1030C offers a broad sample scope of 100 ppb to 30,000 ppm. In its mission to process aqueous samples for the analysis of TOC, total inorganic carbon (TIC), and non-purgeable organic carbon (NPOC), the Aurora 1030C has been known to reduce maintenance costs. Built with a patented dual chamber combustion reactor for employing the high temperature combustion technique, the 1030C's first reactor chamber contains a bed of quartz to protect the platinum catalyst in the second chamber from deposition of noncombustible constituents, and ensures consistent oxidation conditions for stable blanks. As a result, this reactor design extends catalyst life and reduces instrument maintenance costs.

The TitroLine® 7750 combines the features of the potentiometric titrator TitroLine® 7000 and the volumetric Karl Fischer titrator TitroLine® 7500 KF. This makes him the universal titrator for many applications.   Highly visible full color display that can be easily viewed from a distance and extreme angles With new interchangeable modules which all relevant reagent and unit data can be stored Expandable, thanks to the 2 x USB-host, 1 x USB-PC and 2 x RS232 ports. Connectables are e.g. USB keyboard, USB printer, barcode reader, USB flash drives, balances, PC und further SI Analytics devices such as piston burettes and sample changers Storage of results using via USB port (PDF – and CSV -format) including method transfer With standard methods for potentiometric and KF titration

The ebro Thermal Imager TIC 100 measures and documents temperature-sensitive products. You can easily determine the temperature distribution of a product during laboratory analysis and capture it on camera.As the temperature is measured by infrared and thus a contactless measurement, the Imager TIC 100 can be used for temperature measurements of moving or voltage-carrying parts. With the Imager TIC 100, the measured temperatures can be captured and documented quickly and easily with the camera.   The power of the Thermal Imager TIC 100: The infrared camera with micro SD memory shows contactless in less than one second temperature points (hot or cold) The thermal imaging allows for optimal evaluation of defects Ease of use through an easily understandable menu navigation Robust design with ergonomic design made for improved use Thermal images can be moved and saved from micro SD-card Pinpoint temperature measurement Provides heat sources and critical temperatures in a quick and safe manner Rapid fault diagnosis with thermal images Measurement technology allows to measure with a safe distance from the objects to the imager Particularly suitable to measure temperature on voltage-carrying or moving objects in the electrical and mechanical fields Typical Applications: The use of thermal imagers in building thermography, a method for testing the insulation of houses, the control of flat roofs and analysis of masonry, for localization of cracks in pipes and for creating an energy performance certificate is already successful in use for many years. In industrial and mechanical trade thermal imagers are in use to check electrical systems. Here for example in use for the determination of the power loss of electronic assemblies and thetesting of mechanical systems. Thermal imaging cameras are also sucessful tools in fire fighting service. The use of cameras without risk and fast remaining embers from fires can be detected and people are found in smoke-filled buildings. In veterinary medicine, the thermal imaging camera is used in diagnosis. The measurement of the surface heat of inflammatory regions of the body of an animal helps the veterinarian to identify of the causative when he is making a diagnosis.

For temperature and pressure measurements in tight spaces, ebro offers the EBI 11 mini data loggers.Many configurations are available to suit your application, including data loggers with internal sensors, rigid metal probes, bendable metal probes, Luer-Lock connection or threaded connection versions.The EBI 11 Mini Data Loggers are suitable not only for validation monitoring but can also be used for routine control monitoring.   Applications: For tight spaces, e.g. in small steam sterilizers, bottles, cans or bags Validation of steam sterilizers and autoclaves Validation of washer-disinfectors and washer-disinfectors for endoscopes Validation at canning etc. Pressure measurement up to 10 bar

The easy to use data loggers with USB connection monitor the temperature and/or humidity during transport and storage of sensitive goods like medicine, food, serums etc. The EBI 300 and EBI 310 USB data loggers are suitable for multi-use, the EBI 330 USB data loggers are single-use versions which can be ordered preconfi gurated and are used especially when returning a more expensive multi-use data logger to the sender after a shipment is difficult.   Cold Chain Monitoring Program|Measure Programming of the logger with the help of the free online confi gurator at www.ebi300.com or optional via the software Winlog.basic, Winlog.light or Winlog.pro Set optional limits and start to record the measurement data Connect|Readout Connection of the logger to any PC via the USB port Automatic generation of a PDF report with all important measurement data Evaluate|Archive Store, save or email the PDF report Further processing of the measurement data with the software Winlog.basic, Winlog.light or Winlog.pro

The patented and award-winning RiverSurveyor®, S5/M9 systems give a new perspective to the notion of measuring open channel hydraulics. Using SonTek's exclusive SmartPulseHD®, multiple acoustic frequencies are fused with precise bandwidth control for the most robust and continuous shallow-to-deep discharge measurements ever.   A deterministic microcontroller expertly apportions the proper acoustics, pulse scheme, and cell size to get the highest definition possible so you can focus on the measurement, not the instrument setup. The system even has a vertical beam for precise channel definition and it's all designed to work intuitively.And just like the name implies - SmartPulseHD (just like your TV) lets you see the clearest velocity picture possible with cell sizes down to 2 cm. Features Multi-Band - Multiple acoustic frequencies1,2 Vertical acoustic beam1 SmartPulseHD® (Patent Pending) Internally computed discharge and secure data1 Standard 360º compass and two-axis tilt sensor Reverberation control with ping rates to 70Hz Bottom-tracking RTK GPS (optional) 1 U.S. Patent #8,125,8492 U.S. Patent #8,411,530 Benefits Balances the highest resolution with the greatest range of depths Superior channel definition, extends the maximum measurable discharge depth An intelligent algorithm that looks at water depth, velocity and turbulence, and then acoustically adapts to those conditions using pulse-coherent, broadband, and incoherent techniques. High-def cell sizes down to 2 cm. All discharge computations are done within the S5 or M9 unit internally (not in the computer!) – No lost data from communications drop outs Compensates for vessel motion due to surface conditions. High ping rates ensure extremely robust data collection. High precision vessel tracking and depth measurement without GPS requirement. Ultra precise earth-referenced positioning as an alternative to bottom tracking in moving bed or other difficult situations.

Introducing the EXO DCP Signal Output Adapter 2.0 from YSI, designed with and engineered for compatibility with the EXO sonde platform. As technology continues to develop at record pace, it's more critical than ever to have a flexible sonde that can keep up. A fundamental part of the EXO Sonde platform is the ability to adapt its communication output to match different monitoring applications. Simply configure a sonde with this adapter and the instrument is then compatible with data loggers and telemetry systems, or PCs and tablets with USB connectivity. Converts the proprietary signal from an EXO Sonde into either SDI-12 or RS-232.

Using our new SI Analytics laboratory stirrer with heating, the process of mixing liquids can be selected from careful to intense, and the device can be also be used for speedy heating up or controlled temperature adaptation.   All functions can be viewed and monitored on the large, clear LCD display. The stirrer speed range from 100 to 1000/min and can be set in steps of 10/min. The heating power can be set in 24 steps and reaches an average heating output of 0.9 kW at step 24. If a Pt 1000 temperature sensor is connected which enable a temperature control between 25°C to 200°C at an accuracy level of +/- 2° to 5°C as a function of liquid volume, heat capacity and ambient temperature. The display will inform the user at intervals of 5 s about the actual and the set temperature.

To heat up liquids quickly and safely, SI Analytics hotplates SLK 12 are the optimum solution. The heating power can be adjusted in 9 steps and heats up to 1.7 kW (with extended hotplate step 2 and the 230 V version only).   The pore-free glass-ceramics surface (easy-to-clean) is highly resistant against chemical influences and temperature fluctuations. The glass-ceramics surface has a high infrared permeability and hence is exceptional economic saving energy and time. The heating surface is throughout planar and offers not heated border areas. This allows the vessel to be heated partially or completely removed off the hotplate. High-quality, powder-coated and nonsensitive stainless steel casing. Heating area with two zones (230 V) for small and bigger vessels. Indicator LED for residual heat for safe operation. An optional compressed air connection allows operation in highly aggressive environment.

The YSI Professional Plus handheld multiparameter meter provides extreme flexibility for the measurement of a variety of parameters such as DO, conductivity, specific conductance, salinity, resistivity, total dissolved solids (TDS), pH, ORP, pH/ORP combination, ammonium (ammonia), nitrate, chloride and temperature.   The Quatro cable attached to the Pro Plus allows you to utilize 4-ports to measure temperature/conductivity, DO, and any two ISEs among pH, ORP, ammonium, chloride, or nitrate creating an extremely powerful handheld multiparameter instrument.  Other cable array options are available too! Toughest The Pro Plus instrument meets the demands of true field work. The instrument is rated to IP-67 standards even without the battery cover on. Other tough features include a 3-year warranty, Mil-spec connectors, rubber overmolded case, and a 2-year cable warranty. In-house testing procedures also include 1-meter drop tests from all angles to ensure expected field-durability. Tough, Field Durability Features Include: Easy-to-install cable weights; can be daisy-chained for additional weight* Rubber, over-molded IP-67 waterproof case (even without the battery cover)* 3-year instrument warranty 2-year cable warranty* Rugged cables, sensors, and military-spec connectors* Drop-tested 1 meter at all angles* Scratch-resistant lens; viewable with polarized glassesInstrument floats Weighted, user-replaceable multi-sensor design  Smartest The instrument provides numerous benefits from the following features; 5,000 data-set memory, password protection, backlit display and keypad, graphic display with detailed Help functionality, re-cal prompts, user defined fields, detailed GLP, auto stable, Hold All Readings function, Data Manager software for the desktop, USB connection, auto-buffer recognition, and flexible folders and site lists for logging data. Smart Features Include: 5,000 data set memory Detailed on-screen Help function* Free, Data Manager desktop software and ProComm II saddle* Interval or single-event logging100 folder & site list data structure* Password protection Detailed GLP data USB connection also powers the instrument 6-point cal with auto-buffer recognition* User-adjustable auto-stable with prompts* User-upgradeable software via waterproof USB port Recalibration prompts Search function filters user-defined data information* Backlit display AND keypad* Cable management kit included with all cables from 4- to 30-meters*  Most Versatile Connect any Professional Series cable (excludes ODO cables) and probe option to the instrument and use the convenient cable management kit to keep everything simple and organized. Cable options range from 1-, 4-, 10-, 20-, and 30-meter choices (up to 100-meters on DO only cables). Use lab or field probes and switch between the two quickly. The Pro Plus makes an ideal lab BOD instrument with the proven self-stirring BOD probe. A convenient handstrap can be used on either side of the instrument. A complete family of accessories also increases the versatility of the Pro Plus. Choose among accessories including carrying cases, flow cells, cable weight, belt clip, tripod, and c-clamp. Added Versatility Features Include: Adjustable right- or left-handed hand strap* Multiple user-replaceable sensor options and a choice of DO sensors* Multiple parameter options and cable lengths Lab-grade ISE sensors and BOD probe available to make a true lab/field instrument Languages - English, Spanish, German, French, Italian, Norwegian, Portuguese, Japanese, Chinese (Simplified and Traditional) Wide array of accessories are available from flow cells, to shoulder straps, to carrying cases

The Bubbler has an improved controller and pressure regulator that use a sophisticated system of sensors and valves to regulate the bubble rate and purge pressure. And to keep the sediment from settling around the orifice line, this Bubbler provides a purge feature to keep the pressure at a desired level. You can even start a manual purge, anytime, with the touch of a button. This system was made for those who don't have time to mess around at the site.   Designed to replace nitrogen gas purge bubbler systems, the WaterLOG® Bubbler (H-3553T) provides the highest purgre pressure in the industry (up to 90 PSI), while maintaining high accuracy thanks to its built-in NIST traceable pressure sensor. With programmable flow rates, a sleep current of 6mA, and an RS-485 connection, it is sure to be a favorite among your products. Stand alone RS-232 menu setup Continuous display readout Built-in calibrated pressure sensor (no external pressure sensor needed) 'Purge', 'Read' and 'Tank Release' buttons RS-485 MODBUS Client/Slave device Auto update mode, measures itself based on user defined rate Adjustment knobs to manually set the stage and sensor SDI-12 address SDI-12 interface, 4-20mA output and RS-232 data output

Available as single, dual and multiple wavelength derivatives not only covering the visible spectrum, the ADP600 Series of Peltier temperature controlled polarimeters are capable of measuring optical rotation to four decimal places in the highly sensitive ultra-violet region. This capability makes the instrument particularly suited for use by scientists wishing to measure chiral compounds and other optically active substances in the chemical, pharmaceutical and food sectors as well as for use in academic research. Sample Tubes & Peltier ControlPeltier technology is intelligently applied to the sample chamber of the new polarimeters so that measurement can be accurately made without the need of an external device such as a waterbath to control sample temperature. The ADP600 Series Polarimeters have two preset operating temperatures being 20 and 25 °C in accordance with European and United States Pharmacopoeia respectively and other user temperatures between 20 and 30°C may be configured via the instrument user interface.ADP600 Series Polarimeters accept standard glass or special low volume leur taper polarimeter tubes facilitating measurement across optical path lengths between 5 and 200m with tube diameters from 3 to 8mm being readable. Optional lids may be easily be fitted to the ADP600 Series Polarimeters, facilitating sample tube entry and exit.

The YSI EMM350 Pisces is a lightweight pontoon platform which supports water quality, water velocity, and meteorological sensors, as well as computer logging systems.Housing it's payload are two topside aluminum chests that contain the data acquisition system, cellular modem, and battery. The chests are easily serviceable from the water and accommodate multiple underwater cable connections.   The YSI EMM350 Pisces is a lightweight pontoon platform which supports water quality, water velocity, and meteorological sensors, as well as computer logging systems. Housing it's payload are two topside aluminum chests that contain the data acquisition system, cellular modem, and battery. The chests are easily serviceable from the water and accommodate multiple underwater cable connections. This platform is ideal for coastal, estuary, river, and lake monitoring. It can be deployed by two persons with a truck and a small boat. For data acquisition, there are several instrument array data acquisition options available - we are confident that we can meet your needs. The EMM350 offers user-programmable sample intervals, redundant error recovery logic that detects unexpected activity and recovers automatically, and is compatible with all YSI EXO and 6-Series Sondes equipped with depth. Features Include: Towable by most small vessels Ideal for high currents up to 12 knots Loading and deployment by two persons Standard configurations available with short lead time High profile for visibility in navigable waterways Abundant power reserve and solar accumulation Datalogger, cellular modem, meteorological sensors, and ADP configurations Sonde standpipe is retractable for transportation and towing Also available in flow-through cell configuration with option for multiple-depth sampling Applications Include: High velocity applications Rivers and Streams Baseline studies Dye-tracing studies Emergency response Fisheries Industrial sites Non-point source/TMDL Point source/discharge Stormwater & CSO Source Water University/research Available Options: Met Package affording additional parameters to complement your monitoring program Wireless Data Transmission - several options are available. Tell us what you need and we will find which suits your application best Satellite Communications - Either Iridium or GOES telemetry can be fitted on this system

The YSI 9300 and YSI 9500 are economical photometers in small packages for any application. These portable photometers allow you to easily take readings directly in the field for 100+ parameters.   Selecting the desired test has never been easier. Simply choose among the list of available tests on the large graphic display and the instrument will walk you through the test procedure - it's that easy! Simple. Convenient. Accurate. Features for the 9300 include: Direct reading concentrations Waterproof IP-67 rating Large, backlit graphic display Sample tube holder automatically adjusts for various diameters On-screen instructions virtually eliminates reading manuals Multiple languages (English, French, German, Spanish, Italian) 100+ test choices The 9500 features all of the above, as well as: Waterproof USB connection that can also power the instrument Internal memory for 500 sample sets User-selectable options for test units, sample numbers, dilutions factors, or additional tests You can rely on the accuracy and reliability of YSI's 9300 and 9500 photometers. Just choose the reagents for the parameters of interest and start getting results today. The 9500 includes hard-sided carrying case with foam cutouts for the instrument, accessories, reagents, and more along with a waterproof USB cable.

Capturing accurate data in fresh water, ground water and marine aquatic environments is easy with the versatile multiparameter EXO1 sonde. Ideal for estuarine, surface water or ground water applications.Instrument Only. Cables, probes/sensors, and accessories sold separately - please see the "Accessories" tab for details.   The EXO 1 is a muliparameter instrument that collects data with up to four user-replaceable sensors and an integral pressure transducer for depth. Key Benefits High-accuracy sensors with on-board memory Wireless communications Fast response times for profiling and sampling Seamless integration into marine, estuarine, freshwater and ground water monitoring systems Smart Sondes and Sensors Extremely versatile instrument, allowing the user to automatically configure a sonde with different sensor for different applications in minutes Smart Ports: Each sensor port on the sonde accepts any EXO water quality sensor and automatically recognizes it. Sensors are user-replaceable and made from rugged titanium housing. Sensor Options: Conductivity and Temperature Dissolved Oxygen (optical) fDOM (Fluorescent Dissolved Organic Matter, surrogate for CDOM) pH or pH / ORPDepth (integral) Total Algae (Dual-channel Chlorophyll and Blue-green Algae) Turbidity Accuracy Tested in a variety of rigorous field conditions as well as lab conditions to ensure accuracy and response times Sample without Interruption No matter which EXO sensors users select, other features of the sensors' design make them rugged and durable: Wet-mateable connectors resist corrosion Isolated components prevent short circuits Welded housings and double o-rings prevent leaks High-impact plastic and titanium resists breaking Built-in antifouling systems protect data integrity Low power consumption extends underwater deployments

The new multi-parameter systems with intelligent, digital sensors for pH, dissolved oxygen (DO) and conductivity measurement revolutionize multi-parameter measurement:The signal processing is completely located in the sensor, and the measuring signal is transmitted to the meter without interference and in a clearly identifiable manner via thin, highstrength cables. A wide range of sensors are available for virtually every application.   The MultiLine® meters are in a class of their own:3 models with one, two or three universal channels measure every parameter either sequentially or simultaneously. Every model possesses a brilliant color graphic display, two USB interfaces (USB-A and Mini-USB), and rechargeable batteries that can be charged directly in the device. Field Sets for PortablesHandhelds are available in convenient carry cases including sensors and accessories for immediate use. Meter sets with three sensors will be delivered in the large field case including accessories.

Laboratory Refractometers: For precise measurement of concentration. Our expertise in optical engineering, electronics and software design has enabled us to create instruments that are used extensively throughout the world's food, drinks, pharmaceutical, chemical and petroleum industries. Handheld Refractometers: The use of a hand refractometer facilitates convenient and rapid measurement of concentration in a number of liquid and semi-solid samples. Bellingham + Stanley offers a complete choice of hand held refractometers starting with the E-line economy range of optical to the OPTi digital models that provide the most accurate performance in its class. Polarimeters: Bellingham + Stanley manufactures high quality general purpose polarimeters for use in a variety of applications, along with a range of sample tubes and quartz control plates for instrument validation.