Asian Test Equipments Hapur, Uttar Pradesh

We offer Yarn Testing Equipments. The Wrap Reel is offered in both motor or hand operated models. The yarn is spread uniformly in a band of 20mm as the lea is formed. Up to 5 leas can be formed at one time. One of the arms of the reel can be docked to facilitate the removal of the leas from the reel. The number of turn is indicated on a counter. In case of motor operated wrap reel, a fractional hourse power motor controlled by a pre-set digital counter is provided to give the movement to the reel. An electromagnetic brake is provided to stop the movement of the reel almost instantaneously to reduce the chances of over travel.

In the market, we present a highly functional range of Wood Testing Equipments with excellent accuracy. These testing machines offer a complete spectrum of testing jobs in various industries like wooden, automotive, aerospace, paints, aviation, and many others. We have in our universal testing machines for determining the shear strength, compression strength and elongation of varied materials. Then, there is humidity chamber for maintaining the standing temperature and humidity level to get accurate properties of the test specimen. Fore testing the gloss and brightness of any object’s surface, we have gloss meter. We have all the latest versions of this testing equipment, all in confirmation with the international standards of ASTM D412, D395, D429, GB 9754, IS 3400 and ISO 2813. Specifications: Model: ATE/UTM/60C Straining/ piston speeds (mm/mm) (at no load): 0-150 Resolution of piston movement (mm): 0.1 Clearance for tensile at fully descended working piston (mm): 50-700 Clearance for compression test at fully descended working piston (mm) Clearance between columns (mm): 0-700, 500 Connected Load: HP: 3 V: 400-440 Phase: 3 Dimensions:  LXWXH in (Inch): 72 x 30 x 82 (approx.) Net Weight in (kg): 1700 (approx.) Gross Weight in (kg): 2000 (approx.) Standard Accessories: Clamping jaws for round specimen diameter (mm): 10-25, 25-40 & 40-55 "Clamping jaws for flat specimens thickness (mm) Width: 0-15,15-30,70 For Compression Test: Pair of compression plates of diameter (mm): 120 For Flexural Test:  Table with adjustable rollers, width of rollers (mm): 160 Diameter of the rollers (mm): 50 Max. the clearance between supports: 600 Radius of punch tops (mm): 16,22

Type : Wood Testing Equipment

Application : Wood Testing

Color : Blue

Voltage : 220V

Condition : New

Power : 1-3kw

Power Source : Electric

Warranty : 1 Year

Automation Grade : Semi Automatic

Country of Origin : India

The Asian Universal Testing Machine Digital provide a relatively inexpensive way for Determining the Tensile, compression, shear strength and elongation of a variety of raw materials such as metals, rubber, leather, fabric, plastics, Belts, wires etcetera. They are based on the constant rate of traverse principle in which one end of the test specimen is held in a stationary grip, while the other end is made to move at a known fixed speed. The load exerted on the stationary grip indicated by a digital load indicator. The controller is microprocessor based and has the facility of over load protection, peak hold, and auto calibration. The load directly indicated in kilograms or Newton OR KN. The elongation of the test specimen is measured on a linear scale (or digital indicator according to the model) fixed on the frame of the tester, which indicates the distance between the grips. The frame of the tester fabricated from mild steel to give the required rigidity and strength. Various built-in safety arrangements such as over travel protection Are provided. The tester is finished in metallic paint/powder coated and bright chrome/ zinc plating to give the apparatus a corrosion resistant finish. It is supplied complied with electrical, which include micro-, switches. Push buttons, and contractors for safe and convenient operation. A variety of grips suitable for holding different materials offered as optional accessories. Other accessories such as slab moulding dies, specimen cutting dies, and specimen cutting presses are also offered as optional accessories.    

Type : Universal Testing Machine

Certification : Iso 9001:2008

Application : Testing

Weight : 2-40T

Color : Multicolour

Voltage : 440V

Condition : New

Automatic Grade : Semi Automatic

Power : 3-5kw

Warranty : 1 Year

Country of Origin : India

Brand Name : Asian

used for paint testing

Tracking Index Apparatus is designed by using advance technology and used to test resistance to tracking of insulating materials. This Tracking Index Apparatus has two electrodes made of brass which are placed with an arrangement to test specified load exerted by the test specimen on the surface. It is also provided with an exhaust fan for removing the gases produced during the test and water vapor. Furthermore, it is widely demanded in different laboratories and industries. Related Specifications: IS 302 - 1979 General and Safety Requirements for Household and Similar Electrical Appliances IS 2824 - 1975 Method for Determining Comparative Tracking Index of Solid Insulating Materials under Moist Conditions IEC 112 - 1799 Method for Determining the Comparative and the Proof Tracking Indices of Solid Insulating Materials under Moist Conditions ASTM D 3638 - 1993 Standard Test Method for Comparative Tracking Index of Electrical Insulating Material

ASIAN Toxicity Chamber consists of an airtight enclosure of about 0.7m3 volume lined with opaque plastic sheeting having a hinged, fitted with a transparent plastic panel. Some gaseous products of combustion may react with or be absorbed by the walls of the chamber. So the inner wall has the lining of polypropylene and with polycarbonate, transparency window is provided. The chamber is fitted with a vacuum pump forced air extraction system, which can be closed at the exit from the chamber when required. The chamber is fitted with sampling positions such that the airtightness of the chamber is not impaired. The chamber is containing a mixing axial fan inside the chamber at horizontally and centrally inside the chamber at roof level to ensure rapid mixing of combustion products capable of being switched on and off externally. The burner is to be capable of achieving a flame approximately 100 mm in height. The burner is fitted at the center of the chamber. There is a provision is to be made for igniting and extinguishing the burner from outside the chamber. A digital temperature indicator is also mounted for the measurement of the temperature of the flame of the burner. The specimen support is an annulus cut from a sheet steel nominal thickness 2 mm of approximately 100 mm overall diameter with a 75 mm diameter hole carrying temperature resistance wires approximately 10 mm apart to form a lattice.The complete assembly is equipped with a non-combustible side support arm to give a tennis racket appearance. This sample holder assembly has the provision of sliding of the sample without the leakage of the chamber. There are two flow meters are fitted to the instrument to fine control of the supply of natural gas and air. All the parts are either polished or painted to give the corrosion resistance long life. Gas detection tubes and its pumps are optional which will be supplied at the separate order as per customer requirement.  TECHNICAL SPECIFICATION Volume: 0.7 m3 Height: Approximately 100 mm Thickness: 2 mm of approximately 100 mm Diameter: 75 mm diameter Temperature resistance: Approximately 10 mm

  tensile strength tester and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non-metals such as foam, rubber, textiles, plastic, paper or finished products such as rods, wires, ropes, yarns, belts etcetera. These properties very often play the major role in determining the suitability of any raw material for any specific application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly. technical specification range: 250 kg with 0.1 kg least count digital display elongations: up to 900 mm x 0.1 mm least count digital display traverse speed: 300 & 500 mm/min motor: 1/2 hp, 1425 rpm, 220 v ac single phase induction motor power required: 220 v ac, 500 w, single phase capacity (kilogram) : 500 kg least count (gram) : 100 test speed (mm/minute) : 300mm/min and 500 mm/min resolution (millimetre) : 0.1 mm display type : digital

Type : Tensile Strength Tester

Application : Strength Testing

Color : Blue

Voltage : 220V

Condition : New

Power : 1-3kw

Driven Type : Electric

Warranty : 1year

Certification : ISO 9001:2015

Weigth : 80-100kg

Automation Grade : Semi Automatic

Country of Origin : India

Brand Name : Asian

Certification : ISO:9001-2015

used for the performance test of synthetic hook and loop tape

as per ISO:16603, IS:17334,IS:16546, ASTM

Type : Medical Face Masks

Application : Laboratory

Color : Blue

Country of Origin : India

Our company has brought a revolution in the spring and wire forming industry with advanced Spring Testers. With this machine, we provide cutting edge and non-destructive testing solutions to several industries. This is specifically developed to support industries continual efforts in manufacturing the better product at a lower cost. The offered testers are used for geometrical inspection of 2D and 3D wire formed parts. Technical Specification: Capacity: 100kg Accuracy: 0.01kg Least count for load: 0.1mm Diameter of spring: Max. 100 mm Length of spring: Max: 300 mm Features: Compression plate set for compression springs Attachment for the tension springs Motor operated Worm reduction gearbox Motor, screw mechanism and worm reduction gear box ensure smooth movement Protection from over travel Digital display of load and deflection Application: Spring and wire forming industry Automotive industry Plastic industry Military industry Aerospace industry

Type : Spring Tester

Certification : ISO 9001:2008 Certified

Application : Spring Testing

Color : Multicolor

Feature : Easy To Use

Condition : New

Frequency : 50 Hz

Automatic Grade : Semi Automatic

Power Source : Electric

Operating Current : Single Phase

Warrenty : 1year

Temperature Capacity : Medium Temperature

Puncture Voltage : 220V

Country of Origin : India

Brand Name : Asian

Power : 220 VAC

            Smoke Visibility Tester   Smoke Visibility Tester made of a plywood chamber inner side painted by heat proof paint the ceiling of the chamber have a hole which permits to hold light meter cell while testing. There is a hole in the bottom of the chamber, which is aligning to the ceiling hole. There is a clear glass bulb fitted to the bottom hole. The left-hand side of the chamber has a hole, an exhaust fan fitted to the left-hand side hole. The right-hand side has a hole which permits to flow air at the time of the exhaust of the smoke to the chamber. The front of the chamber has a hinged door, which has a clear glass window on the door. There are shutters on the left-hand side and the right-hand side hole of the chamber. The LUX of the bulb control with the help of an electronics regulator fitted in the panel of the instrument. The ceiling hole and the front glass window covered with the black curtain. The chamber fitted on the section stand. A LUX meter is supplied with the instrument for the measurement of the LUX of the light. There is an aluminum silicate and a stainless steel plate also supplied with the instrument. There is a stainless steel specimen frame tilted at 20?a to the vertical and have the provision to hold the specimen and there is provision to slide the specimen frame. There is a burner mounted on the bottom of the chamber at an angle of 45. A flow meter, pressure gauge and pressure regulator are fitted on the section frame for the adjustment of the supply of the gas. All the parts are painted or polished for the corrosion resistance long life. We will not supply any gas with the instrument.                   Download PDF

Material : Board

Application : Laboratory

Weight : 100

Feature : Best Quality, Easy To Use

Voltage : 220V

Capacity : 0.5 cubic meter

Finishing : Power Coated

Power Supply : Electric

Phase : Single Phase

Warranty : 1 Year

Country of Origin : India

ASIAN Smoke Density Tester is constructed using 14 gauge aluminum box, which is hinged a heat resistant glass glazed door. This box is mounted on the base which houses the controls. Dependent upon the materials tested, the metal may require protection from corrosion. The chamber is sealed except for 25 by 30mm (1by 9in.) openings on the four sides of the bottom of the chamber. A liters/min specified capacity blower is mounted on one side of the chamber. The inlet duct to the bowler is equipped with a close fitting damper. The outlet of the bowler will be connected through a duct to the laboratory exhaust system. The two sides adjacent to the door are fitted with 70mm (2/3in) diameter smoke tight glazed areas entered 480mm (19/4 in.) above the base. At these locations and outside the chamber, boxes containing the optical equipment and additional controls are attached. A removable white plastic plate is attached to the back of the chamber. There is a clear area centered above the bottom of the chamber. Through which is seen an illuminated white on the red exit sign. The white background permits observations of the flame, smoke, and burning characteristics of the materials. The viewing of the exit sign helps to correlate visibility and measured values. The specimen holder is supported on a square gauge. Stainless steel wire cloth above the base and equidistant from all sides of the chamber. This screen is lying in a stainless steel bezel supported by a rod through the right side of the chamber. From the same rod similar bezel is located below and it supports a square of asbestos paper which catches any particles that may drip from the specimen during the test. By rotating the specimen holder rod, the burning specimen can be quenched in a shallow pan of water positioned below the specimen holder. The specimen is ignited by a propane flame from a burner operating at a specified pressure. The fuel is mixed with air which has been propelled through the burner by the venturi effect of the propane as it passes through a small orifice. The burner is designed to provide adequate outside air. the burner is capable of being positioned quickly under the specimen so that the exit of the burner falls on a line passing through a point 8mm above the base at one corner of the chamber extending diagonally across the chamber and sloping upwards at 45 deg with the base. There is a control panel which controls and indicate the supply of gas. Lux of the light measurement system of the mounted light source also mounted in the instrument. There is a digital timer mounted in the instrument to indicate the time.  

Material : Aluminium

Application : Laboratory

Weight : 20kg

Feature : Best Quality, Easy To Use

Voltage : 220V

Finishing : Power Coated

Power Supply : Electric

Phase : Single Phase

Warranty : 1 Year

Country of Origin : India

Implemented with hi- tech technology, Salt Spray Chamber brings forth an economical and highly effective solution for checking the corrosion resistance of a surface coating on the exposure to a salt environment. This is a time-tested product which is specifically engineered and developed for assessing the ability of the component to withstand corrosion due to atmospheric conditions. This inspection of the components ensures complete flexibility in the evaluation of real life weathering conditions.  Features: Fog collection device Digital timer with memory backup Hanging arrangement with tray Water level sensor with air regulator High level of accuracy in temperature Digital temperature indicator cum controller Thermostat with indicator and buzzer Atomizing nozzles Double walled chamber reinforced with excellent glass wool insulation No distortion and deformation due to high temperature Heater with Sensors Application: Quality control laboratory Automotive industry Railway industry Defence sector Technical Specification:s: Chamber Capacity: 100-2,000 liters Temperature range: Ambient to 60°C Accuracy: +/-0.5°C to 1°C Humidity range: Ambient humidity to saturation

Type : Salt Spray Chamber

Certification : ISO 9001:2008

Application : Laboratory

Color : Grey

Voltage : 220V

Condition : New

Power : 1-3kw

Driven Type : Electric

Phase : Single Phase

Warranty : 1year

Automation Grade : Semi Automatic

Country of Origin : India

Determination of Paper Thickness Gauge is considerable importance, both for assuring conformity with design parameters and for evaluation of various physical properties determination of the thickness of paper sample in the laboratory is usually carried out with the help of a bench thickness gauge.The paper component whose thickness is to be determined is kept on a flat anvil and a circular indenter is pressed onto it from the top under a specified. The "ASIAN" Bench Thickness Gauge for paper consists of a dial micrometer (or digital micrometer) fitted on a rigid metallic frame. the micrometer has a flat circular indenter, Which exerts the specified pressure on the paper sample whose thickness is being measured through a dead weight. the paper sample is kept on an anvil, which is in form of a flat circular platform. The axis of the indenter and the anvil coincide and are the same as the axis of movement of the indenter. The indenter can be raised and lowered gently onto the paper sample with the help of a lifting lever. TECHNICAL SPECIFICATION Range of measurement: 0 less than 1 0 mm Least count of dial gauge: 0.001 Diameter of anvil: 50 mm approximately Diameter of indenter: 10 mm Pressure on indenter: 100 gm/cm2 Throat depth: 50 mm

Size : 2inch

Type : Gauges

Material : Stainless Steel

Diameter : 10 mm

Shape : Round

Color : Blue

Feature : Accuracy, Measure Fast Reading

Display Type : Digital

Country of Origin : India

used in the laboratory of paper industry

Type : Paper

Color : Blue

Country of Origin : India

Asian Melt Flow Index Tester for plastic measures the melt flow index of the plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruded tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater clogged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of the tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipment. TECHNICAL SPECIFICATION Desiccators Diameter: 300 mm Rating: 5A 230V Single Phase Vacuum Level: 22 Timer: 5 minute (mechanical) Desiccators Polycarbonate: Polycarbonate Body: Stainless Steel Actual Size: 22 (W) x 17 (D) x 19 (H)

Type : Melt Flow Index Tester

Material : 50

Certification : ISO 9001:2008 Certified

Color : Grey

Feature : Easy To Use, Superior Finish

Condition : New

Automatic Grade : Semi Automatic

Power Source : Electric

Operating Current : Single Phase

Warrenty : 1year

Temperature Capacity : High Temperature

Country of Origin : India

Brand Name : Asian

We are the manufacturer of Mechanical UTM capacity from 100N to 200 kN, Traverse speed Fixed, Variable

ASIAN Limited Oxygen Index Apparatus consists of a test chimney made of borosilicate glass suppurated by the metallic base and hook with the help of the metallic pillar. The mixture of nitrogen and oxygen is released from the bottom of the tube. The tube is filled with glass beads for mixing and evenly distributing the gas mixture. The specimen holder, which holds the test specimen, made of U shape and fixed at the center of the chimney. There is the porous screen mounted below the level of the specimen holder, to prevent falling combustion debris from fouling the gas entry and distribution paths. There is a digital temperature indicator cum controller with a thermocouple for the measurement. A copper tube with a suitable orifice for pilot flame is provided for igniting the specimen by inserting it from the top of the test column. The digital preset timer and buzzer are also mounted in the instrument. Two rotameter with needle valve is provided to control and measure oxygen and nitrogen flow in the test chimney. A timer for indicating the time of burning with a reset switch. The rotameter, temperature controller, timer are fitted in the sheet panel. The test chimney is fitted separately on the metallic platform. Gasses, gas cylinders and its fittings are not provided with the equipment and have to be arranged by the purchaser. TECHNICAL SPECIFICATION Dimensions of test column: 75 mm inside diameter x 450 mm long Rota meters: 0.625 to 6.25 liter/minute for oxygen & 1.05 to 10.5 liter/minute for nitrogen Temperature indicator: Up to 199 degree C x 1 degree C Timer: Timer Up to 999 seconds x 1 second

Type : Testing Apparatus

Certification : ISO 9001:2008

Application : Testing Use

Weight : 30-40kg

Color : Multi

Voltage : 220V

Condition : New

Power : 100-200W

Driven Type : Electric

Warranty : 1yrs

Automation Grade : Semi Automatic

Country of Origin : India

Brand Name : Asian

Brand Name : Asian

Application : Testing Use

Power : 100-200W

Certificate : ISO 9001-2015

We manufacture all type of Leather testing equipments.

The Asian hot air Oven has a test chamber of double walled construction. The inner walls are made of stainless steel sheet and outer walls of CRCA sheet. The space between the two walls is filled with mineral wool for insulation. The chamber is fitted with two adjustable perforated shelves for keeping the test specimen or the test equipment on. TECHNICAL SPECIFICATION Body Material : CRCA Sheet No of Chamber : One Operating Voltage : 220 V Inner Body Material : Stainless Steel Temperature Range : +5 C to 250 Degree C Brand : Asian

Type : Laboratory Hot Air Oven

Material : Stainless Steel

Certification : ISO 9001

Application : Laboratory Use

Weight : 0-500kg

Color : Grey

Feature : Auto Cut

Voltage : 220V

Condition : New

Frequency : 50Hz

Automatic Grade : Semi Automatic

Power : 1-5kw

Driven Type : Electric

Warranty : 1yr

Storage Capacity : 800-1600L

Temperature : 100-200°C

Brand Name : Asian

Country of Origin : India

used for the measurement of hardness of rubber

We are the manufacturer of totel Inward Leakage tester, as per IS:9473

Type : Half Mask

Material : Cotton

Application : Laboratory

Color : Blue

Country of Origin : India

Brand Name : Asian

Certification : ISO:9001

We are the manufacturer of PU foam Indentation Hardness Tester. This is digital model we are also manufacturer of digital cum computerised model

Used for Flammability tester for fabrics as per IS:,ASTM and BS standards

Type : Flammability Testers

Certification : ISO 9001:2008 Certified

Application : Fabric Flammability Uses

Color : Polished stainless steel

Feature : Easy To Use

Condition : New

Frequency : 45Hz

Automatic Grade : Automatic

Power Source : Electric

Operating Current : Single Phase

Warrenty : 1year

Temperature Capacity : Medium Temperature

Country of Origin : India

Brand Name : Asian

Power : 200 W