Shree Adinath International Hazaribagh, Jharkhand

Basically, Soapstone Powder is a Hydrated Magnesium Silicate with the chemical formula Mg3 Si4 O10 (OH) 2 and is also known as Talc Powder. It is a naturally occurring platy mineral, which can be of white, grey, green, pale green and gray white color. Our Soapstone Powder is finely grinded and is free from any foreign particles. Our Soapstone Powder or Talc Powder is used to cater various manufacturing and processing industries. We offer our Soapstone powder with 80% to 90% whiteness. The company is a renowned Manufacturer and Supplier of Soapstone Powder. Acclaimed For Extreme SoftnessSmoothnessHydrophobicityHigh Lubricating and Hiding PowerAbility to Absorb Oil and GreaseMohs hardness - 1Vitreous-Pearly Luster and White StreakDensity- 2.75

We are a prominent Soapstone Lumps Manufacturer and Supplier in India. We offer high grade Soapstone Lumps, which are highly appreciated for their purity. Our Soapstone Lumps are widely demanded for their properties like softness and lubricating power. We offer our Soapstone Lumps to our valued clients at very affordable rate. Acclaimed For High Absorbance QualityWithstand High TemperaturesAvailability of All Mesh SizesTight Packaging Applications Paints and CoatingsPlastic IndustryFood industryRubber industryCosmetic industryPharmaceutical industryPaper makingElectric Cables, etc.

Talcum powder in 80% to 90% whiteness in 300 mesh

Description     High Speed Automatic Rotary Ampoule & Vial Washing Machine is specially designed to wash Ampoule & Vial with minimum contact of machine parts with container. Machine with specially designed Gripper system holds the container from Neck and invert till the washing operation completed and again after washing release the container on outfeed feedworm system in vertical position ensures positive wash of containers. Machine is suitable to wash various sizes of containers with the help of change parts. Automatic Rotary Ampoule & Vial Washing Machine is widely uses in Pharmaceutical, Veterinary & Biotech industry for performance & cGMP demanding customers.     Salient Features     All contact parts with the internal surface of Ampoules/Vials and the wash media are made of AISI SS 316L Stainless Steel   Other parts are made from engineering plastic, FDA approved or AISI SS 304 Stainless Steel   All finishes, welding joints are processed, treated & equipment selected in accordance with cGMP standards   18 Jets for 6 Internal washing zones   15 Cassette of Grippers each having 2 Grippers   Suitable for 1ml to 25ml ampoule & 2ml to 100ml vials   Washing sequence can be made as per customer’s requirements   3 Pumps and 3 Tanks of 25 liters each   Each washing zone with independent circuit to avoid contamination   Automatic Infeed and Exit of Ampoules/Vials   Output capacity of up to 240 Ampoules/Vials per Minute     Process Operation     Ampoules/Vials feed from the Infeed tray are received on an Infeed Feedworm then moves on Infeed starwheel. The Grippers picks up the Ampoule/Vial from Infeed Star Wheel and invert it in neck down position over washing needles and move along with the needle bar for Washing. On completion of a cycle, washed ampoules/vials are again inverted to neck upward position and feed to output star wheel. Washed ampoules/vials received from output starwheel can be collected on Output Tray or can be pushed to tunnel

Description     Automatic Linear Vial Washing Machine is suitable to wash injectable glass vials. Machine equipped with seven washing stations can be interchangeable as per specific customer’s requirements. This Linear Vial Washer provides 4 water wash & 3 air wash for positive & pressurizing washes of vials. All contact parts made from AISI SS 316L and non-contact parts from AISI SS 304 materials. Vials invert into neck down position and nozzles enters into vial during washing cycle to meet GMP requirements. Automatic Linear Vial Washing Machine is ideal and economic choice for online Sterile Vial Filling Line.     Salient Features     A complete cGMP model   All contact parts made from S.S. 316L   Entire frame covers & non contact parts made out from SS 304   Easy cleanable & Inter changing facility   Machine provides 4 water washers & 3 air washers   Complete Flexibility with user for washing cycle   Feeding online vial transferring chain through turn table   "No Vial - No Washing” system   “No washing - No water supply” system   Nozzles enter into the container during washing cycle to meet cGMP requirement   Low water consumption   Quick change over with minimum use of tools   Microprocessor based variable AC frequency drive for speed control   Vial counter for counting the final production output   Process Operation     Containers feed from the de-cartooning station are received on an Infeed turn table through visual inspection unit. An in feed worm inverts container to neck down position and feeds them through a specially designed indexing device. The device carries the container forward and stops. Nozzles carrier enters into the container and activities the jet of water/air. The air/water flow is deactivated after the washing cycle is over. Device indexes the vials for next wash. A separate pumping station gives the right quantum of water at the desired pressure. Washed containers are again inverted to neck upward position to collect in trays or directly feed to sterilizing tunnel.

  Description     Automatic Linear Vial Washer Machine is used for the washing of pharmaceutical glass vials. We are having two different models of vial washer which provided output of 120 vials per minute and 240 vials per minute. These models are most suitable for the online untouched vial filling production line.     Salient Features     Compact cGMP model.   Provides production output up to 250 vials per minute.   All contact parts made from high quality stainless steel AISI SS 316L.   Machine structure & other parts made from AISI SS 304   SS Tanks & trays made from SS 316L by argon welded with round corner.   SS pump made from SS 316L with mechanical seal Monoblock pump.   SS filter housing made from SS 316L.   All Nozzles made from SS 316L.   Special Pocket system ensures easy and trouble free washing of vials from outer and inner side.   Indexing motion makes easier for syringes to move inside vial, when it is in stationery motion.   No Change parts are required from 5 ml to 30 ml vial.   Washing cycles can be adjusted as per customer requirement.   User friendly machine, even semi skilled operator can operate the machine very easily.   A Special clutch device is incorporated for Stoppage of Machine in the event; vial is over turned or over diameter.   Variable A.C. Frequency drive for Main drive and conveyor.   Pumps with tank (60 litres each) 2 nos.   In feed Wire Woven Belt for feeding of Vials.   HDPE material Vial pockets.   Machine is totally robust and withstands continues operation for long working hours without any trouble.   Machine is equipped with PLC system & printing facility with passwords.   No Change parts are required.   Process Operation     Vials pushed from in feed tray and then move on wire woven conveyor belt, which align the vial in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the vial inside pocket in mouth down position over spraying nozzles. Multijet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters, each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the vials, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of vials passes through the washing cycles selected. The duly washed vials then delivered to the out feed tray with neck opening upward and then automatically re ordered to sterilizing tunnel with back pressure.

Description     Automatic Linear Bottle Washing Machine is suitable to wash glass bottles. Machine equipped with six washing stations can be interchangeable as per specific customer’s requirements. This Linear Bottle Washer provides 3 water wash & 3 air wash for positive & pressurizing washes of bottles. All contact parts made from stainless steel 316 and non-contact parts made from stainless steel 304 materials. Bottle invert into neck down position and nozzles enters into bottle during washing cycle to meet GMP requirements. Automatic Linear Bottle Washing Machine is ideal and economic choice for online Sterile Vial Filling Line. Machine is having uses in Pharmaceutical, Cosmetic, Food, Chemical & allied industries.     Salient Features     A complete cGMP model   All contact parts are made from high quality Stainless Steel 316L and argon arc welded   All exposed parts are made from Stainless Steel 304/hard chrome plated/brass for corrosion free long life.   The unit built on S.S. Square pipe frame and totally encompassed with S.S. Coverings   Washing section is totally covered with acrylic cabinet.   “No Container - No Washing” system.   “No washing - No water supply” system.   Quick change over with minimum use of tools.   Variable AC frequency drive for speed adjustment.   Low water consumption.   Digital counter for counting production output.   Fixed top nozzles at each washing station ensures external washing of vials/bottles at the same time of internal washing.   Flow of washing Medias stop during the indexing of chain saves utilities.   Easily cleanable & Inter changing facility.   Process Operation     Containers feed from the de-cartooning station are received on an In feed turn table. An in feed worm inverts container to neck down position and feeds them through a specially designed indexing device. The device carries the container forward and stops. Nozzles carrier enters into the container and activities the jet of water/air. The air/water flow is deactivated after the washing cycle is over. Device indexes the vials/bottles for next wash. A separate pumping station gives the right quantum of water at the desired pressure. Washed containers are again inverted to neck upward position to collect in out-feed tray/directly feed to tunnel

Description     Automatic Airjet & Vacuum Cleaning Machine comprises a stainless steel frame mounted on adjustable feet. The Containers are manually loaded on the Turn Table. The loaded containers are fed in upright position via Turn Table are inverted in mouth down position and linearly feed through a chamber which is under a negative pressure, a series of nozzles blow air in the container to clean their containers, are re-erected with mouth up at the outfeed end. This Automatic Airjet & Vacuum Cleaning Machine is ideal machine for the cleaning of Plastic, HDPE & PET bottles uses in pharmaceutical industry.     Salient Features     Machine provides 8 air washes.   All contact parts made out from SS 304.   Entire frame covers & non contact parts made out from SS 304.   Over load clutch is provided to prevent jamming on machine.   Quick change over with minimum use of tools.   Used in product like dry Syrup, Tablet, Capsule etc. Process Operation     This machine works on a principle of back pressure of Bottle which will be fed by the unscrambler to reach separator assembly, which transfer the Bottle on conveyor belt and pushes bottle to the cleaning section one after another. Machine consists of two inverters and one cleaning section. Bottle will be pushed by rotating separator towards the infeed inverter, which makes the Bottle in the wrong direction and push it to cleaning section through back pressure of other Bottle. Cleaning section is

Description     Multijet Ampoule & Vial Washing Machine is a simple, compact, versatile and a reliable ampoule & vial Washing machine, with the latest GMP demand. The machine is enclosed in stainless steel construction with flexibility to wash 1ml to 20ml ampoules and 2ml to 100ml glass vials with the help of suitable change parts. The standard unit is having mechanical motorized cam operated valve system for observing total six washing in one cycle. Alternatively timer operated solenoid valve system or microprocessor controlled timer sequences can be in-corporate upon specific customer request. Multijet Ampoule & Vial Washing Machine is widely use in medium & small scale injectable organizations.     Salient Features     Positive & pressurized jets through washing needle for pressure cleaning at minimum usages for washing media.   Sound design concept of pressure tank for reverses & continuous supply of washes medias.   Both internal & external washing ensuring absolutely & continuous ampoule / vial after sequential washing.   Acrylic top cover for clear view of washing events taking place in the machine   On-line poly carbonates housing with P.P. replaceable filter cartridge of 5 OR 10 micron of water for best possible washing.   All contact parts of washing media are of S.S.   In the event of acrylic cover lifted during cycle operation, the machine will automatically stop and re-start from the point when cover is pushed down.         Process Operation     The dump loading procedure may be used, if ampoules/vials are received in ready to dump boxes, which will have exactly into the same number of ampoule/vial and the pitch, as loading tray. Alternatively, each ampoule/vial has to be arranged into the tray. The loading tray/s is placed directly into the machine & the handle bar is lowered for ampoule/vial for automatic centering of washing needles into the ampoule/vial mouths. The top cover is also lowered & switch is operated for automatic sequent

Production Rate : 30 to 110 Vials/Min.

Description     Adinath offer superior quality Rotary Bottle Washing Machines, which are based on Geneva mechanism. This Rotary Bottle Washing Machine is available in sturdy and accurate configuration and offer superior functionality in the pharmaceutical industries. Our bottle washing machines are offered in safe packaging to avoid any damage during the transportation. Apart from the pharmaceuticals, this machine uses in Food, Chemical, Cosmetic & Beverage industry for washing glass bottles.     Salient Features     The specially designed cups are provided on the platform to accommodate any size of Bottle from 100 ml to 500 ml.   Easy loading and unloading with two rows.   Individual solenoid valve for each washing sequence.   Pumps and tanks are mounted on parable stand for easy maintenance.   Compact GMP model.   Geneva mechanism.   Four internal, one external and one air wash.   Washing Sequences and positioning of washing stations can be interchanged as required for liquid oral & injectable.   Stationary nozzles eliminate contamination of water cycles.   Process Operation     The bottles are loaded on rotating platform where bottles are getting cleaned in a series of operations. The bottle holder i.e. nylon cups are specially designed to accommodate bottles with varying neck diameter and bottle diameter. The bottles are placed in an inverted position in cups. The external cleaning of the bottles is done by spraying showers. Solenoid valves are provided to enable the regulation of timings and sequence of various washing media to suit specific requirement.

Description     Automatic Vial Washer is uses for the washing of pharmaceutical glass vials. Machine is having six washing station for complete inner & outer washing of pharmaceutical glass vials. This model is most suitable for the online untouched aseptic filling line.     Salient Features     Provides production output up to 120 vials per minute.   All contact parts made from high quality stainless steel AISI SS 316L.   Machine structure & other parts made from AISI SS 304   SS Tanks & trays made from SS 316L by argon welded with round corner.   SS pump made from SS 316L with mechanical seal Monoblock pump.   SS filter housing made from SS 316L.   All Nozzles made from SS 316L.   Special Pocket system ensures easy and trouble free washing of vials from outer and inner side.   Indexing motion makes easier for syringes to move inside vial, when it is in stationery motion.   Washing cycles can be adjusted as per customer requirement.   User friendly machine, even semi skilled operator can operate the machine very easily.   A Special clutch device is incorporated for Stoppage of Machine in the event; vial is over turned or over diameter.   Variable A.C. Frequency drive for Main drive and conveyor.   Pumps with tank (60 litres each) 2 nos.   In feed Wire Woven Belt for feeding of Vials.   HDPE material Vial pockets.   Machine is totally robust and withstands continues operation for long working hours without any trouble.   Machine is equipped with PLC system & printing facility with passwords.   No Change parts are required.   Third Tank & pump can be fitted (optional).   Process Operation     Vials pushed from in feed tray and then move on wire woven conveyor belt, which align the vial in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the vial inside pocket in mouth down position over spraying nozzles. Multijet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters, each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the vials, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of vials passes through the washing cycles selected. The duly washed vials then delivered to the out feed tray with neck opening upward and then automatically re ordered to sterilizing tunnel with back pressure.

Description     Automatic External Vial Washing Machine is designed to wash the outer surface of round shaped Vials. Machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.     Salient Features     Complete cGMP model   Suitable for vial sizes from 5ml to 100ml without any change parts (No change parts required)   “No Vial – No Washing” system eliminates wastage of water & air   Easy cleaning & maintaining   Machine is equipped with PLC system.   Stops supply of water & air when acrylic doors opened during operation.   Indication & alarm in PLC.   Normal water required for washing & no hot water required   When there is no vial on conveyor, it stops the water & air supply. Infeed & outfeed Turn Tables.   Imported Gear motor for main drive, unscrarnbler and scrambler   Variable A.C frequency drive for main drive, unscrambler and scrambler Acrylic cabinet for machine.   Process Operation     Form the in feed Turn Table the vials are fed into the External the Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn table for the washing operation. Two Operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the conveyor a set of spray nozzles are fitted on each on each conveyor for water Jet. One set of knife blocks are provided on each conveyor for air. The air sprayed through this knifes . The knifes are fitted in a inclined manner which ensures that is sprayed reaches each corner of the vial which are previously washer. After washing and drying the vials are guided to the out feed turn Table. Before reaching the out feed Turn Table a special arrangement is provided to dry the vial from the bottom side . A set of Syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of vial resulting in the drying of the vials This machine is completely operated by PLC . A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water &air and shows the indication which alarm in the PLC.  

Description     Automatic Vial Washer is uses for the washing of pharmaceutical glass vials. Machine is having six washing station for complete inner & outer washing of pharmaceutical glass vials. This model is most suitable for the online untouched aseptic filling line.     Salient Features     Provides production output up to 120 vials per minute.   All contact parts made from high quality stainless steel AISI SS 316L.   Machine structure & other parts made from AISI SS 304   SS Tanks & trays made from SS 316L by argon welded with round corner.   SS pump made from SS 316L with mechanical seal Monoblock pump.   SS filter housing made from SS 316L.   All Nozzles made from SS 316L.   Special Pocket system ensures easy and trouble free washing of vials from outer and inner side.   Indexing motion makes easier for syringes to move inside vial, when it is in stationery motion.   Washing cycles can be adjusted as per customer requirement.   User friendly machine, even semi skilled operator can operate the machine very easily.   A Special clutch device is incorporated for Stoppage of Machine in the event; vial is over turned or over diameter.   Variable A.C. Frequency drive for Main drive and conveyor.   Pumps with tank (60 litres each) 2 nos.   In feed Wire Woven Belt for feeding of Vials.   HDPE material Vial pockets.   Machine is totally robust and withstands continues operation for long working hours without any trouble.   Machine is equipped with PLC system & printing facility with passwords.   No Change parts are required.   Third Tank & pump can be fitted (optional).   Process Operation     Vials pushed from in feed tray and then move on wire woven conveyor belt, which align the vial in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the vial inside pocket in mouth down position over spraying nozzles. Multijet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters, each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the vials, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of vials passes through the washing cycles selected. The duly washed vials then delivered to the out feed tray with neck opening upward and then automatically re ordered to sterilizing tunnel with back pressure.

    Salient Features     Each independent filter plenum is provided with filter integrity sample ports.   The equipment’s conveyor belt is monitored and alarm status is activated if it operates outside the belt speed set points.   Provision for ports to allow introduction of validation thermocouples in each zone.   The tunnel is provided with fully integrated ampoule / vial flow control logic to allow automatic stops and restarts of the equipment.   All filter modules have differential pressure gauges to monitor pressure.   Pressure switches with high and low alarms   When the tunnel is not in use it can be operated in night-mode to save energy while preventing contamination.

Salient Features     Complete GMP model.   Basic structure made from M.S. Heavy angles.   Sterilizer inner walls made from AISI SS 316 and outer walls made from AISI SS 304.   Doors provided on both sides, one opening is in non-sterile area and second opening in sterile area.   ‘A’ grade mineral wool insulation to optimize heat effectiveness and stop heat loses.   Dynamically balanced fan provided for hot air circulation to achieve uniform temperature.   Complete electric panel board with pulley and damper connection.   Process Operation     The Ampoules / Vials placed in trays are washed in non-sterile room and loaded on the trolley. The trolley is moved to the sterilizer on a transfer trolley. Temperature and Times are set on the Digital Controller. The Impeller mounted on the top circulates the hot air horizontally over the charge. The air is heated by elements mounted on the top. Fresh air enters the system through Hepa Filter Module. The system incorporates two doors, one opening into the sterile room and the other opening in the non-sterile room. Both the doors are pneumatically interlocked. The temperature profile during sterilization cycle is recorded on a circular chart recorder, validation of the system is provided by a six-point digital temperature scanner. After the time period required for sterilizing the batch has elapsed, the heating circuit shuts of the pneumatics damper (exhaust) opens and cooling operation commences.

Description     Ethylene Oxide (EO or ETO) Gas is commonly used to sterilize objects sensitive to temperatures greater than 60°C and /or radiation such as plastics, optics and electrics. Ethylene oxide treatment is generally carried out between 30°C and 60°C with relative humidity above 30% and a gas concentration between 200 and 800 mg/l, and typically lasts for at least three hours. Ethylene oxide penetrates well, moving through paper, cloth, and some plastic films and is highly effective. ETO can kill all known viruses, bacteria and fungi, including bacterial spores and is compatible with most materials (e.g. of medical devices), even when repeatedly applied. However, it is highly flammable, toxic and carcinogenic.   Ethylene oxide sterilization is a chemical process consisting of four primary variables: gas concentration, humidity, temperature and time. Ethylene oxide is an agent that disrupts the DNA of microorganisms, which prevents them from reproducing. EO sterilization assures that a safe and sterile product will be delivered to the market each and every time.     Salient Features     Machine is suitable to Sterilize Surgical Medical Device products like I.V. Sets, Disposable Syringes, Disposable Surgical Set, catheter, Urine Bag etc.   ETO Sterilization reduce microbiological load and increase life span of material.   Modular construction of chamber.   Model is available from 0.5 Cubic Meters to 40 Cubic Metres.   Easy to operate.   Fully automatic operation based on PLC control.   Semi Automatic (Pneumatically Operated Ball Valve) Control.   Contact parts are SS 304 / 316.   Process time about 8 hours.   IQ/OQ/DQ documentation can be offered on demand. (OPTIONAL).   It is useful for prevention of micro biological contamination useful for treatment of spices, dried nuts, Foods Packed cereals etc.  

Salient Features     “No Tube - No Filling" system.   Suitable for filling, sealing coding of Aluminum tube as well as plastic LAMI tubes by changing over the sealing device.   Electrical jacketed S. S. Hopper with thermostatic control to keep the material hot, while filling for a smooth flow of material.   Machine is provided with stirring device, so that no active ingredients in the material can stick to the inner wall of hopper.   All contact parts made of S. S. 16 material.   Relay electrical control system with operating panel with start, stop, and inch.   Variable A.C. drive motor for the speed adjustment.

    Salient Features     Available in S.S./M.S. model.   Available as per your require speed, length, height & width.   Structure is made of S.S. 304/M.S. 32mm square pipe with matt finish/painted.   Table top is made of S.S.304 16 gauge sheet with matt finish.   Conveyor Belt is supplied with 3 speed pulley.   Special Self-aligning bearing ensure smooth and trouble free rotation of the Roller.   Conveyor belt is used as PVC coated canvas belt/endless rubberized belt.   The Reduction Gear Box provides jerk less & noiseless performance for long time.

Description     Automatic Cosmetic Filling Machine is a most widely used machine in the cosmetic industry. The machine also finds application in Food, Chemical & allied industry. The monoblock design saves space since filling and Screw capping modules are built on the same base and the common drive for filling & sealing modules. The filling principle is volumetric, positive displacement of product with piston & cylinder arrangements. Another highlight of this Rotary filler is all the pistons can be set for different volumes by setting the twin cams tracks. Finer volume adjustment of individual cylinders is also built on the cams track rollers. The concept of Monoblock filling and sealing also ensures very high QMP standards, as the bottles are sealed immediately after filling. The rotary sealing module matched with filling and gives accurate sealing. The automatic cap feeder built on separate column prevent dust/cap particles falling into filled bottles. The Monoblock machine has built in feature for on line automation like sensors for bottles fall at infeed machine stops, extra bottle accumulation at out feed and for cap accumulation the feeder stop.     Salient Features     Compact model.   “No Bottle - No Filling” system.   Single Operator for two operations (Filling & Capping).   Machine construction in AISI SS 304 material.   Infeed turn table for automatic feeding of bottles.   Diving Nozzle for Foam free filling.   Very High Fill Accuracy.   Automatic In-feed and Exit of Bottles.   Minimum Change Over time.   Variable AC frequency drive for speed adjustment.   Digital bottle counter for counting production output.   All contact parts made of AISI SS 316L material with easy removal system for easy cleaning.   Process Operation     In-feed turn table deliver bottles one by one to the moving Stainless Steel conveyor. Bottles come into the filling point through SS conveyor. Filling Nozzle fill pre set volume of liquid into the bottle. The hexagonal bolt dosing block allows using of different filling volume easily with minimum use of time. The main drive consists of a gearbox driven by AC motor & through controlled by an AC Frequency drive. The speed can be set in terms of bottles per minute. The conveyor drive consists of a hallow shaft geared motor controlled by an AC frequency drive. A knob can set the speed of conveyor. The filled bottles moving on conveyor belt and fed into an in-feed star wheel by in-feed worm. While moving in-feed star wheel, bottles pick up caps one by one from delivery chute. The descending rotary sealing head hold bottle’s neck with desired pressure. The sealing is done in a programmed roll-on manner, accurate positioned of the caps is done mechanically by means of a rotating unscramble, to direct the caps correctly into the chute, when the chute is filled up the rotating unscramble drive is disengaged, hence, there is no chance to damage of caps. The sealing roller takes place due to rotating sealing head and transfer movement of sealing & threading rollers due to sealing cam. The sealed bottles are discharged by exist star wheel on conveyors. Duly filled & sealed bottles forward to labeling machine for further operations.

Description     Automatic Eye Drop Filling Machine is suitable for the filling plastic vials uses in eye drop application. Machine is compact and provides higher production output. Machine is suitable for application in pharmaceuticals, biotech and Biopharmaceutical industry.     Salient Features     Compact GMP model.   The unit is made compact & versatile as per current norms.   All contact parts made from high quality Stainless Steel 316.   Machine body is elegantly matt finished from Stainless Steel 304.   Slat conveyor belt made from Stainless Steel 304.   “No Vial - No Filling” system to avoid wastage of costly liquid.   High filling accuracy of ± 1% in single dosing.   Plugging without leaving plug on vial.   Latest design picks up system.   All three operations on one platform, hence less space requirement.   Process Operation     Vials loaded on Stainless Steel rotary in-feed turn table. Vials move from turn table to Stainless Steel slate conveyor belt here filling in vials take place by Nozzles. Nozzles fill the vials pre-determined volume of liquid. After filling vials move for next operation where plugging fed into the vibratory bowl are correctly oriented and continuously pushed to the chute inlet. The tightly held vials pick up by system to plug from the chute outlet and moves further pressing operation. Pressing operation is carried out by presser rollers, which ensures complete pressing of plug. After plugging vials move for next operation where sealing is done is same manner as plugging has done. Duly filled & capped vials delivers on outfeed collection tray.

Description     Onion Skin Tube Filler built on principle of slant travel of tubes while filling and sealing, to take care of vide variation of tube neck dimensions & thicknesses of available standard tubes. The Filling unit built on Stainless Steel Square pipe frame and totally encompassed with Stainless Steel coverings, in pleasing matt finish. Further, the large opening available at the bottom side for ease of absolute cleaning. The pendant type electrical control panel is lifted from machine for ease of operation and safety.     Salient Features     Compact model.   All contact parts made from high quality Stainless Steel 316 & other Non-contact parts made from Stainless Steel 304.   “No Tube – No Filling” system.   Tube neck centering during gas flushing and filling operations.   Possibility of nitrogen gas flushing before, during and after filling.   Full accessibility allows easy maintenance.   Machine equipped with pre-warming station.   Minimum change over time, little maintenance & easy cleaning.   Process Operation     The sterilized tube tray directly loaded in to slant hopper of the unit. The Synchronized star wheel delivers tubes, one by one on moving eccentric tube rack in single. During the stoppage of rack sequentially pre-gassing, filling, post gassing, pre heating and final sealing is achieved.

Description     We are manufacturer of pharmaceutical machinery parts. We manufacture spare parts for any type of pharmaceutical machine whether is mechanical based or electronic based. Our range of parts consists Stainless Steel parts, Mild Steel Parts, Nylon Parts, Aliminium Parts. We manufacture spare parts for below machinery in pharmaceutical industry:   Ampoule Filling Sealing Machine   Ampoule Washing Machine   Ampoule Labelling Machine   Vial Washing Machine   Vial Filling Stoppering Machine   Sterile Powder Filling Machine   Vial Cap Sealing Machine   Vial Labelling Machine   Oral Liquid Filling Machine   Dry Syrup Filling Machine   Auger Powder Filling Machine   Cream Manufacturing Plant   Syrup Preparation Plant   Water for Injection Plant   Capsule Filling Machine   Capsule Inspection Machine   Capsule Polishing Machine   Tablet Dies & Punches     Salient Features     Compact GMP model.   The unit is made compact & versatile as per current norms.   All contact parts made from high quality Stainless Steel 316.   Machine body is elegantly matt finished from Stainless Steel 304.   Slat conveyor belt made from Stainless Steel 304.   “No Syringe - No Filling” system to avoid wastage of costly liquid.   High filling accuracy of ± 1% in single dosing.   Latest design picks up system.   All three operations on one platform, hence less space requirement.    

Description     Automatic Prefilled Syringe Filling Machine is suitable for the filling prefilled syringe uses in pharma applications. Machine is compact and provides higher production output. Machine is suitable for application in pharmaceuticals, biotech and Biopharmaceutical industry.   Process Operation     Syringes loaded on Stainless Steel in-feed hopper. Prefilled syringe tray can directly loaded on to the machine. Syringes move from infeed station to the filling station filling is done by electronic pump. After desired volume filling syringe transfer on stoppering station stoppering is done on well designed manner. Duly filled & stoppered syringes delivered on outfeed collection tray without hand touch.

Description     Rapid Mixer and Granulator designed for optimum performance. cGMP complaint with special attention given to clearing Validation. Rapid Mixer Granulator is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity. Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections.     Salient Features     Complete GMP model.   All contact parts made from Stainless Steel 316 with Non contact parts made from Stainless Steel 304.   MS structure is fully covered with Stainless Steel 304 covers/claddings.   All contact parts are mirror polished to 220 Grit and external surfaces to matt finish of 180 Grit.   Homogeneous binder distribution.   Short batch time and reduce cleaning time.   Maximize CIP effectiveness.   Air purge sealing system for main stirrer shaft and granulator shaft.   All internal contact parts are polished to the mirror finish.   PLC based operating panel for precise control of process & automation.   A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size.   The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes.   Granulator motor is provided with a removable stainless steel shroud which covers the motor and simplify cleaning.   All moving parts of the machine are totally enclosed to eliminate accident.   The machine can not be started unless and until the mixer cover is properly closed.   Flush wall type discharge valve eliminates pockets at the port of discharge valve