PRATIGYA ENTERPRISES PVT. LTD hisar, Haryana

Rapeseed/Casting Mould Oil is developed to be used as lubricant and mould release agent at the process of Steel Continuous Casting. The product is non-toxic and is not harmful for human nature and the environment. Advantages Our Product provides you the benefits of using our Oil at the Steel Plant: Rapeseed/Casting Mould Oil forms a very strong lubricating layer between solidifying metal and mould guaranteeing prevention of both metal and mould surface. Rapeseed/Casting Mould Oil increases the life of mould about 30%. Rapeseed/Casting Mould Oil forms a good lubricating film on the surface of mould not allowing solidifying metal adhesion to the mould. The vapor formed during casting is non-toxic and irritating. Rapeseed/Casting Mould Oil provides easy and fast solidification of metal by providing high rate heat removal from metal. Rapeseed/Casting Mould Oil gives ver y good performance at elevated temperatures with the aid of its well selected additives. Rapeseed/Casting Mould Oil increases the quality of metal surface.

It is used to supply oxygen at high pressure to the tap hole of furnace to start the flow of molten metal. Designed and manufactured in line with international quality standards using quality-approved mild steel, this pipe resists bending under high temperature. As per the varied needs of clients, this Ms Oxygen Lancing Pipe is available with us in various lengths and diameters.   Function Gas purging/powder injection is a key part of the steel refining process. The introduction of alloys or treatment agents by this means ensures faster assimilation and maximum efficiency of the process. In the case of gas purging the process is essential for temperature and compositional homogenisation before casting. PRATIGYA™ M.S. Oxygen Lances have a reputation for reliability and consistency.   Benefits Suitable for high pressure without leakage Oil & dust free Corrosion and oxidation resistance Stable mechanical properties

Nozzlex nozzle well filler is a free-flowing refractory particular material used in the ladle or tundish sliding gate to prevent skulling and steel freeze-off and ensure easy opening at the start of casting.   Description Nozzlex is a highly refractory, granular product with selected particle size and distribution, which remains flowable at high temperature, ensuring consistent and trouble-free ladle slide gate operation.   Application For achieving the best results: Nozzlex should be pre-heated at around 100°C for about an hour to drive out any physical moisture. The nozzle cavity should be cleaned of slag and any refractory particles before application. The quantity of Nozzlex to be applied should be carefully determined so that the nozzle cavity is entirely filled, with a slight mound at the nozzle top. It should be applied with a suitable applicator to ensure that the product is applied at the proper place.   Function Successful operation of ladle slide gate depends to a large extent on the use of proper nozzle filling compounds and operating conditions, as well as nozzle well block geometry. To meet these demanding conditions, the nozzle filling compounds should have sufficient refractoriness to prevent sintering of the particles at high temperature, and ensure good flowability.   Benefits Good nozzle opening performance is ensured The need for oxygen lancing for opening the slide gate nozzle is minimized Well block and nozzle life is increased The life of the slide gate plate is extended Due to good nozzle opening performance, Nozzlex drastically reduces the incidence of ladle return from the casting platform.

We provide a range of insulating castables with speciality materials and low densities. These insulating castable refractories are used as either a back-up lining or for hot face work. They are of low to medium strength, making them resistant to abrasion or particle attack. We offer a wide range of castables with lower cement content. Varying in Alumina content, this range of products have excellent physical properties. They have low porosity, high strength and good abrasion resistance   Applications Boilers, Reheating Furnace, Heat Treatment Furnace Power Plant Boilers, Reheating Furnace, Power Plant, Heat Treatment Plant Coke Oven Door, Soaking Pit, Rotary Kiln, Aluminium Industry Small Capacity Ladle, Reheating Furnace, Rotary Kiln, Aluminium Plant Power Plant, Petrochemicals Ladle Patching Glass Tank Furnace, Power Plant, Burner Blocks, Ladle Ladle, Rotary Kiln Ladle Shaft Kiln

Ceramic Fiber Blanket is a needled blanket that is made from high purity spun ceramic fiber, suitable for high temperature insulation up to 2300°F.   Characteristics and Specifications Lightweight, low thermal conductivity, high temperature stability, excellent handling strength, low heat storage, thermal shock resistance, chemical and corrosion resistance (commonly used acid and alkali), excellent fire protection.  Applications Furnace repair Furnace, kiln, reformer and boiler linings Furnace door linings and seals Reusable insulation for steam and gas turbines High-temperature kiln and furnace insulation Primary reformer heater insulation High temperature gasketing Expansion joint seals Glass furnace crown insulation Field steam generator lining Nuclear insulation applications Thermal reactor insulation Flexible high temperature pipe insulation Investment casting mold wrapping Removable casting mold wrapping Removable insulating blankets for stress relieving welds Pressure and cryogenic vessel fire protection Soaking pit seals High temperature filtration Incineration equipment and stack linings

Bolts are used to join pieces together either permanently or temporarily. Many steel structures, including buildings, are simply bolted together. For example, the Eiffel Tower in Paris was originally a temporary structure and after twenty years it was to be dismantled. For this reason most of the steel components were bolted together. Nuts and bolts can also be used to fix together small structures such as furniture. Nuts and bolts come in many different types and sizes, as some of them shown below.  Coach Bolts with Square Flat Nut Bolts have a square collar under the domed head and this locks into the wood when the nut is tightened. A washer is normally placed before the nut to stop it from sinking into the wood as it is turned.   Machine Bolt with Hexagonal Nut Two spanners are needed to tighten this nut and bolt. The first spanner fits around the hexagonal head of the bolt and a second spanner is used to tighten the hexagonal nut. The countersunk machine screw fits level with the surface of the wood/metal/plastic. A screwdriver is used to keep the bolt still, whilst the wing nut is tightened by hand. Counter sinking can be done with ordinary wood screws also.   Machine Screw Countersunk Head with Wing Nut The countersunk machine screw fits level with the surface of the wood/metal/plastic. A screwdriver is used to keep the bolt still whilst the wing nut is tightened by hand. Countersinking can be done with ordinary wood screws also.   Machine Screw round head and plain washer A plain washer prevents the nut sinking into the surface of the wood/plastic/metal.   Machine Screw Pan head & Spring Washer A spring washer is used in case there is a need to prevent a nut and bolt loosening