Chempro Equipments Sipcot Phase I, Hosur, Tamil Nadu

The genesis of Antichem Equipments can be traced to 2005. when a group of technocrats with years of experience in diverse fields decided to pool their combined talent and create an engineering company that would be a projection of their personality and achieves their goals. Antichem Equipments is the outcome. commenced Reg. Office at Salem, District, Tamil Nadu. we having a factory Facility for Fabrication at Perundurai. providing technical consultancy to diverse industries while commencing the manufacture of a range of evaporators, distillation columns, and dryers. Today we have experienced core staff with numerous contractors and sub-contractors. In a short time, we established ourselves as the leading manufacturer of Evaporator, ATFD, Distillation Column, Heat Exchanger, etc., in TN. Our approach is based on knowledge, concept, design, planning, and execution, especially when it came to specialized Falling Film Forced Evaporator and Thin Film Evaporation technologies. Our competencies covered the entire gamut of Zero Liquid Discharge systems, Multi-Effect Evaporator, and ATFD technologies allowing us to design and deliver solutions to meet client needs. ANTICHEM EQUIPMENTS Leads under superior engineering design capabilities, manufacturing excellence, and a project-based approach for commitment to delivery with high performance for total evaporation solutions customized to client’s requirement.   Our Product Range Falling Film Evaporator Plant Forced Circulation Evaporator Plant Rising Film Evaporator Plant ATFD Product Concentration Plant Stripper Column Distillation Plant

Country of Origin : India

Voltage : 220V

Automatic Grade : Automatic

Power : 1-3kw

Driven Type : Electric

Weight : 100-1000kg, 1000-2000kg

Zero maintenance pumps, eliminate the need for gland Packing and seal. Leakproof and can run dry without damage of rotating parts. Pumps to be mounted outside the suction tank vertical position and not to be submerged. Vertical Glandless Pumps, similar in hydraulic design to any conventional centrifugal pumps, it differs in, so far as a restriction is provided, escape by way of an overflow Connection in the upper pump body & return to the suction line. Preferred selection for E.T.P.Plant because of seal-less design & can run dry. Low maintenance cost & makes maintenance easy.

Country of Origin : India

Pressure : 5 Kg/Cm2 Max.

Country of Origin : India

Finishing : Polished

Automation Grade : Automatic

Thickness : 10-20mm

Country of Origin : India

Automation Grade : Automatic

Material Of Construction : All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut and impeller are made of 55316 investment castings. The outer & inner pipes are seamless types made of 55-316. The shaft is made of SS-316 bright bar. Guide Sleeve and lip seals are made of Teflon.   Material Of Construction : All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut and Impeller are made of Molded Polypropylene, Outer & Inner pipes are made of Polypropylene, Shaft is made of Hastalloy-B-2 or, SS-316 also available. Guide sleeve and lip seals are made of Teflon & Impeller Also Available in ETFE/PVDF(if required)   Teflon Barrel Pump Material Of Construction : All wetted parts like pumping chamber, pump base, discharge tee, nozzle, wing nut, impeller are made of TEFLON, Outer & Inner pipes & Guide sleeve are made of Teflon, Shaft is made of Hastalloy-B2. Impeller is made of ETFE (Moulding grade of Teflon)   Drive : Pumps Available with Pneumatic / Flameproof /Non-Flameproof Motor & also Available with Regulating System.   Operation data : Upto 110 Lts / Min. At open discharge head Upto 560cp PUMPING TYPE :Submerged or Self Priming. Antichem Barrel Pumps have widely accepted barrel and container pumps for handling highly fluid and viscous liauirs max.upto 560cp. Pumps has been designed such that it can be used for various containers range from 251ts. Carboy to 500 lts. Barrels Pumps are available in three different pump Tube lengths. i.e L= 700, 1000, 1250mm.

Country of Origin : India

Material : Stainless Steel

Driven Type : Pneumatic

Pressure : 0-10bar

Stripper systems are used to recovering low boiling solvents from wastewater. By using stripper, COD reduces in MEE Plant condensed water.

Weight : 100-1000kg

Voltage : 220V

Automatic Grade : Automatic

Power : 1-3kw

Driven Type : Electric

Country of Origin : India

Type : Single Spring Seal

Material : Stainless Steel

Shape : Round

Grade : SS 304

Temperature Range : 0-25 Degree C

Surface Finishing : Coated

Spring Type : Single

SPM pump is a single stage. Horizontal, Centrifugal, self Priming, End Suction Coupled pump. Automatic and quick self-priming, no foot valve required. No priming of suction pipeline. Sturdy construction, simple design. Minimum maintenance required. Nonclosing and handles solids up to 17 mm.   Application : Ideal for pumping sewage muddy water with solid upto 17mm. To handle polluted liquids, diesel, kerosene, effluents of chemical industries. Dewatering foundations.   Widely used for public and civil engineering. Material of Construction: CI,CS,SS,Alloy20 etc.

Country of Origin : India

Positive displacement external Rotary Gear Pumps are most efficient and economic range with a verity of materials, which has special features like Simple & Compact design, Low noise level, High in efficiency and Easy to maintain. The Pumps are ideal for handling Oils and Viscous Liquids like all kinds of Fuel Oil, mineral Oils, Lubricating Oil, Fish & Animal Oils,Vegetable Oils, Asphaltants, sugar Syrups, Molasses, Starch, Inks, Paints, Colors, Varnishes Viscous Chemicals etc.,   Also available in the flanged end.

Country of Origin : India

Automatic Grade : Semi Automatic

Driven Type : Electric

Pressure : Up to 10Kg/Cm2

PPR Pipes and Fittings are Available in stock from 12mm to 90mm. with All Std Fittings available. 

Country of Origin : India

Length : 4000-5000mm, 3000-4000mm

Application : Water Treatment Plant, Marine Applications, Manufacturing Unit, Construction

Grade : DIN, ASTM, AISI

Feature : Perfect Shape, High Strength, Fine Finishing, Excellent Quality, Corrosion Proof

Warranty : 2years, 1Year, 10 years

Brand Name : prince

Material : Carbon Steel

Shape : Round

Certification : ISI Certified

Color : Green & Blue

Polypropylene Process pump is a horizontal single end Suction standardized process pump. PP Series process pumps are supplied with mechanical seal / gland packing arrangement covering 85% of the chemical industries requirement, the pumps are manufactured from polypropylene co-polymer-a chemically insert thermoplastic by the use of an exclusive moulding process. These pumps give you unusual protection against highly corrosive chemicals. The solid moulded casing and impeller ensure a smooth running pump for long life and a minimum wear. All pumps, shafts are fitted with sleeves of different materials compatible with the liquid handled.   Application Transferring of Concentrated HCL Filter press for Dyes and Chemicals Effluent Treatment. Water treatment plants. Scrubbing of Corrosive Gass like Ci2, Br2, F2, So2, So3,Co2, NH3, Descaling Electroplating.   Industries Where Used Transferring of Concentrated HCL Filter press for Dyes and Chemicals Effluent Treatment. Water treatment plants. Scrubbing of Corrosive Gass like Ci2, Br2, F2, So2, So3,Co2, NH3, Descaling, Electroplating.

Country of Origin : India

Material of Construction : Polypropylene

Led by a team of efficient professionals, we can offer Multiple Effect Evaporators, Plants to our clients. These plants are made using high-quality raw components in tandem with international quality standards. Owing to their easy installation, rugged construction, and longer functional life, our evaporator plants are highly demanded in the market.   Multiple Effect Evaporator Plants are extensively catering to the needs of textile, pharmaceutical, automobile, chemical, and dyeing industries.   Key Features Simple operation Flexible operation Can be customized Saving production cost Less energy consumption

Country of Origin : India

Automatic Grade : Semi Automatic

Top centerline discharge, self-venting casing arranged for back pull-out. Fully confined gasket. Foot support under casing for maximum resistance of misalignment and distortion from pipe loads. ANSI-B-16.5 (Class 150) flanges standard. ANSI-B-16.5 (Class 300) optional for working pressures to 2550 kpa with 3mm corrosion allowance. For Maximum Corrosion erosion resistance casing is supplied without tapped opening but gauge and drain plug opening are provided when specified.   Impeller matched to the casing for high efficiency and low NPSH. Fully open, has partial shroud for maximum vane support without high thrust inherent in closed impellers. Stuffing box pressure reduced and the entrance of solids prevented by back pump-out vanes. Large smoothly contoured flow passages combine the best slurry and solid handling ability. The impeller is locked on the shaft with impeller lock-out and is sealed by PTFE gasket. State of the art casting methods provide the smoothest possible surfaces for the highest efficiency. All impeller is statically and dynamically balanced.   Application : High Temperature liquids up to 260 C. Low specific gravity hydrocarbons Highly Viscous & high freezing point fluids Corrosive acids Caustic Services Slurries Outdoor or Indoor installations

Country of Origin : India

Details : Seatless & glandless valves Field replaceable elastomer Sleeve / muff Rubber sleeve / muff has four reinforced lugs Flanged ends & drilled to DN, ANSI, BS-10, IS etc., This valve in-corporates all design modification based on our experience & good quality finishing to abrasive and corrosive media.

Country of Origin : India

Material : Stainless Steel

Number Of Way : 3way

Finishing : Polished

Actuation Type : Single Acting

Automatic Grade : Automatic

Overall Length : 6-10 Inch

Diametre (milimetre) : 100 To 1000 Mm

Country of Origin : India

Material : SS

Finishing : Polished

Material Grade : SS304

Automation Grade : Automatic

Outer Diameter : 10mm, 20mm

Inner Diameter : 40mm

Pressure (Bar) : 10 Bar

Thickness : 10-20mm

The unique pumping principle applied employs a highly precision manufactured Metallic Single helical rotor turning inside a double internal helical resilient stator. Thereby forming cavities confined by a "Sealing Line' which is main¬tained at a stand still and during rotation. Whilst the rotor rotates in the stator, the cavity formed between them progresses from suction to delivery side, gently carrying the medium.   Good self-priming properties even with air or gas inclusion in the lquid upto 8.5MWC.   Handles solids in suspension or mixture containing a high percentage of solids. Bigger size pumps up to 40mm dia.   Steady and smooth flow with little pulsation makes it suitable for dosing and metering duties.   The direction of the flow through the pump is reversible by merely changing the direction of rotation of the prime mover.   The pressure head is independent of speed and capacity is proportional to speed.   Gate and check valves are not necessary.   The metal bonded high precision moulded stator ensures, high efficiency pressure and increased life.   The unique pumping principle applied employs a highly precision manufac-tured Metailc Single helical rotor turning inside a double internal helical resilent stator. Thereby forming cavities confined by a "Sealing Line' which is main¬tained at stand still and during rotation. Whilst the rotor rotates in the stator, the cavity formed between them progresses form suction to delivery side, gently carrying the medium.   Good self priming properties even with air or gas inclusion in the lquid upto 8.5MWC.

Country of Origin : India

Weight : 5-10 Kg

Voltage : 220-440V

Automatic Grade : Semi Automatic

Power : 0-5Kw

Driven Type : Electric

Pressure : High Pressure

Running RPM : 0-1400

In Forced Circulation Evaporator the liquid is pumped in the tubes with high velocity. As the liquid enters the separator where the absolute pressure is slightly less than in the tube bundle, the liquid flashes to form a vapor.   It is suitable for use with materials that tend to foul the heat transfer surfaces and where crystallization can occur in the evaporator in the vapor separator.

Country of Origin : India

Material : Stainless Steel

Voltage : 220V

Finishing : Polished

Automatic Grade : Semi Automatic

These Pumps are designed for handling of most of Several Industrial duties & available in a variety of lining materials to suit different requirements involving highly aggressive media at elevated temperature. the wetted parts of the umps are lined with the following flouropolymers. PVDF (Polyvinylidene fluoride) FEP (Fluorinated ethylene propylene) PFA (Perfluoroalkoxy)   These pump having excellent chemical as well as temperature resistance similar to PTFE & cost effective alternatives to expensive metals & alloys Hastelloy , tantalum, nickel etc.,   Special Properties of PVDF Resistance to most chemicals & Solvents High thermal stability Mechanical strength at elevated temperature High purity High abrasion residence Resistance to sunlight Resistance to nuclear radiation Low flame & smoke characteristics Resistance to fungus Low permeability to most gases & weldable Cold weather impact strength   Wetted parts of the pumps are PVDF/FEP/PFA lined. Strong metal WCB / SG IRON Armor provides positive, solid support to polymer lining and anchoring grooves provide reinforcement. Hence these pumps can with¬stand for higher stress at elevated temprature and pres¬sure than split armored / solid molded pump Available in 1440 as well as 2900rpm.

Country of Origin : India

Surface Finishing : Polished

Coating Thickness : 0.5-1mm

The liquid to be concentrated is preheated to boiling temperatures; even thin films enter the heating tube via distributors in the head of the evaporator, flow downward at boiling temperature, and are partially evaporated. Spreading of liquid to each tube and forming the thin film across the area of the tube is the principle of falling film evaporator.   It can be used for processing liquors, which are sensitive, have a high rate of specific heat transfer, for low fouling, low viscous fluid & for non-crystalline solutions.

Country of Origin : India

Material : Stainless Steel

Voltage : 220V

Finishing : Polished

Automatic Grade : Fully Automatic

Phase : Double Phase

Steam Pressure : 0.5Mpa

Country of Origin : India

Sealing Type : Double Spring

Material : Steel

Finishing : Polished

Material Grade : SS304

Automation Grade : Automatic

Specialities : Unbreakable, Good Quality, Fine Finish

We stand as a leading player of the market dealing in a technically sound and productive range of Air Operated Double Diaphragm Pump. The offered pump is extensively used in the circulation of liquids and air. Finds application in chemical, pharmaceutical, beverages and many more industry, this pump is manufactured in compliance with predefined industry standards by making use of quality checked components and advanced technology. Moreover, this Air-Operated Double Diaphragm Pump is available in various specifications with a complete range for our esteemed clients.   Pump Features : No electrical motor - non sparking. No mechanical seals or gland packing. The Pumps can run dry without damage. Safe for use in hazardous/explosive environments. Variable flow - simply regulate the inlet air supply to adjust the flow from zero to max. By opening discharge, the flow starts automatically. Self-priming from a dry start-up to 6 meters without a foot value. Pressure up to 100 PSI (7 bar) Operates submerged or with flooded suction No close fitting, sliding or rotating parts so can handle a wide range of fluids with high solid content. Gentle Non-shearing action. Quick assembly and disassembly.

The Axial flow pump generates flow by the thrust or lifts action of rotating axial vanes of the impeller. The pump has an elbow that directs the flow through the suction and out the discharge end of the pump. It can be used in the top or end suction configuration depending upon the need and flange dimensions, bolt circles and holes comply with ANSI B16.5, 150#. The back pull-out design (up to 14"size) allows for easy maintenance and repair as the rotating element may be removed without disturbing the pipework. The pump has wear rings as standard and lift¬ing eye on the bearing bracket.   Applications : Axial Flow Pump is unmatched in the industry for high volume / Low head pumping requirments, especially when corrosive and/or abrasive solutions are involved.   Mainly used in the following application : Evaporator and Crystallizer Circulation Phosphate, Soda Ash, Potash and Sodium Chloride Processing Black Liquor Evaporator, Chlorine Dioxide Generators Sewage Digesters Raw Water Pumping, Flood Control, Marine Ballast transfer   Horizontal nonself priming pump with back pull-out design (up to 14"size & bigger size available on request). The "back pull out " design allows for the maintenance of the pump without disturbing the pipework connected to the casing, or the pump alignment.

Country of Origin : India

Our Axial flow Pumps is Unmatched in the industry for high volume/ low head pumping requirements, Especially when Corrosive and Abrasive requirements, Especially used in the following application : 1. Evaporator and Crytilizer Circulation 2. Phosphate Soda ash, potash and sodium chloride processing 3.black liquor Evporator , chlorine dioxide generators Operation Data : Pump Size : 5" to 36"(DN125 to 900) flow upto : 20,000 cu.mtr Head : 9 Mtrs max temperature : 300 Degree Max Pressure : 10 Bar  

Country of Origin : India