India Engineering Concern Ichapur, Howrah, West Bengal

Contact us for immaculate quality Zero Velocity Valves at competitive rates.  We are a reliable Manufacturer and Supplier of Zero Velocity Valves in West Bengal. The Zero Velocity Valves offered by us is designed to arrest the forward moving water column at zero movement i.e. when its velocity is zero and before any return velocity is established. Bulk orders of the Valves are processed by us as per the specific requirements of buyers. The main advantages of Zero velocity valves are : Controlled Closing Characteristics. Low head loss due to streamlined design.   Purpose of Zero Velocity Valve :Zero velocity valves are developed to eliminate water hammer problems. In common practices swing check valves are installed on the pump discharge end. Theoretically, swing check valves close quickly when the pump is shut off by actually not quick enough to prevent reversal velocity of flow. The flap of the swing check valves will slam against its body seat and will cause noise, vibration, pipe stressing and seat damaging. All these hindrance can be controlled by use of spring return zero velocity valve. Application & Location of Zero Velocity Valve :Zero velocity valve has function to problem for limiting water surge after power failure. Locations of the valves have therefore to be based on the results of the analysis of water column separation.Zero velocity valves are so placed that the entire length of water column is suitably divided in spite of differing gradients and undulations. More than one valve may be required in such cases.Zero velocity valve can be mounted in any position i.e. Horizontal, vertical or inclined pumping main as well as gravity main, due to to the center guided spring assisted designed. This eliminates the problems arising from from installing a valve in "Wrong" orientation or the necessity of changing existing lines to accommodate the valve design. Inventory requirements are reduced because one valve design can be used in a wide variety of application, regardless of the valve's orientation in the line (When the valve is used in vertical downward flow position, a heavier spring is simply substituted to compensate for the weight of the disc and stem).

Type : Zero Velocity Valves

Material : Carbon Steel

Certification : ISO 9001:2008 Certified, SSI

Application : Industrial

Weight : 100-15kg

Color : Black, Sky Blue

Condition : New

cast iron, cast steel, stainless steel, ductile iron body ss ball, g.m ring.

Size : 1/2inch, 1inch, 2inch, 3/4inch, 4/5inch, 5/6inch, 6/7inch), 40 Mm To 200mm

Type : Tamper Proof Air Valve

Material : Carbon Steel, Metal, Stainless Steel

Certification : ISO 9001:2008 Certified, SSI

Color : Blue

Pattern : Plain

Pressure : 50-100Deg C

Automation Grade : Automatic

Swing Check Type Reflux Valve is a device which restricts the flow in one direction only. Our company is an established Manufacturer and Supplier of Swing Check Type Reflux Valves in West Bengal. Rigorous quality-tests ensure that only defect-free Swing Check Type Reflux Valves reach the buyers. Owing to our reliable logistics network, we are capable of delivering bulk orders of the Reflux Valves within the stipulated time.Characteristic Features : Leak Proof Sealing Robust Construction Low pressure drop Non Throttling Effect Trouble free service Inter changeable parts Easy installation Long Life Service Low Maintenance Gentle Closure   Additional Arrangement : Hydraulic Dashpot By pass Drain Plug / Scour Cleaning Door Air Release plug Lifting lugs Reiveted metal seat Resilient seat

Size : 1/2inch, 2inch, 40 mm to 600mm

Material : CAST IRON

Certification : ISO 9001:2008 Certified, SSI

Application : Water Fitting

Color : Black, Blue

Automatic Grade : Automatic, Manual

Brand Name : IEC

Sluice Valves are used to isolate the flow of liquid in both the directions. Our company has cemented its presence among the trusted Manufacturers and Suppliers of Sluice Valves in West Bengal. The Sluice Valves offered by us have robust construction and high durability. In full open position the Valve facilitates clear interrupted full bore flow path resulting in minor / low head loss. Characteristic Features : Leak Proof Sealing Robust Construction Trouble Free Service Inter Changable Parts Easy Installation Long Life service Low maintanance Easy Oeperation   Optional Arrangement : Enclosed Gear Open Gear Electric Actuator Pneumatic Actuator Hydraulic Actuator Back Seat Bush By Pass Position Indicator Drain Pluc / Scour Cleaning Door Shoe & Channel Lifting lugs Thrust Ball Bearing Handwheel locking Air Release plug Chainwheel Drive Extension shaft Floor Stand / Headstock Muff Coupling Handlever Operation Shaft Seal Tee Key operation Square Cap operation Riveted Seat Screwed in seat Position Limit Switch Universal Coupling

Size : 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 400-450mm, 450-500mm, 50-100mm

Type : Cast Iron Sluice Valves

Material : Cast Iron

Certification : ISO 9001:2008 Certified, SSI

Application : Gas Fitting, Oil Fitting, Water Fitting

Weight : 10-15kg, 15-20kg, 5-10kg

Color : Black, Blue

Condition : New

Pressure : Low, Medium

Brand Name : IEC

The company stands tall among the reputed Manufacturers and Suppliers of Single Faced Sluice Gates in West Bengal. The Single Faced Sluice Gates are extensively used in water supply, waste water applications, water treatment, intake wells, pumping stations, drainage works, irrigation cannels, effluent treatment, sewage treatment system, flood control, etc. We are capable of delivering bulk orders of the Single Faced Sluice Gates within the allocated time.

Type : Sluice Gate

Material : Iron, Mild Steel

Shape : Rectangular, Square

Color : Black

Width : 2-4ft, 4-6ft, 6-8ft

Height : 5ft, 6ft, 7ft, 8ft, 9ft

Brand Name : IEC

Parent basic material cast iron, s.g. Iron, cast steel type of valve construction single small orifice, single large orifice, double large & small orifice, double large & small orifice with inbuilt isolating stop valve, kinetic double large & small orifice with separate isolating mitre bevel geared isolating sluice valve, tamper proof double orifice air valve. Manufacturing standard is : 14845, awwa c 512 fluid application clear water, sewage & effluent, raw water end flange standard is : 1538, is : 6392, bs : 10, ansi b 16.1, ansi gb 16.5, bs : 4504, awwa c 207 or any other std. Screwed end standard is : 554, bs : 4504, awwa c 207 or any other std. Screwed end standard is : 554, bspt, npt etc. Type of wedge solid & taper, flexible, double disc manufacturing range of size 25 mm to 200 mm, rating pn ã�â¢ã¯â¿â½ã¯â¿â½ 10, pn ã�â¢ã¯â¿â½ã¯â¿â½ 16 & pn - 25

Size : 100-150mm, 150-200mm, 200-250mm, 50-100mm

Type : Cast Iron Air Valve

Material : Cast Iron, Casi Iron

Certification : ISO 9001:2008 Certified, SSI

Application : Water Fitting

Weight : 10-15kg, 15-20kg, 20-25kg, 5-10kg

Color : Black, Blue, Orange

Condition : New

Pressure : High, Low, Medium

Brand Name : IEC

Ms, ss, nut bolt washer.

Size : 0-10mm, 10-20mm, 20-30mm, 30-40mm, 40-50mm

Type : Nut Bolts

Shape : Round

Application : Table Fittings

Price : INR 500 - 50000 -per- Piece(s)

Material : Cast Iron, Stainless Steel, CAST STEEL

Certification : ISO 9001:2008 Certified, SSI

Color : Blue, Red, Black

Brand Name : IEC

cast iron, cast steel, stainless steel , ductile iron body , gate ss 304, stem ss 410 etc..

Size : 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 400-450mm, 450-500mm, 50-100mm, Other

Type : Knife Gate Valves

Brand Name : Other

Material : Carbon Steel, Stainless Steel

Certification : ISO 9001:2008 Certified

Application : Water Fitting, Other

Weight : 10-15kg, 15-20kg, 20-25kg

Color : Black, Sky Blue

Condition : New

Pressure : Low, Medium

Feature : Good Quality

product description :- in order to keep pace with never ending demands of the customers, our company is instrumental in supplying and trading an excellent quality assortment of high tension pin insulator in cuttack, odisha, india. Our high tension pin insulator find its best usage in electrical industry & other related places. These are offered at market leading prices to our esteemed customers.product details:voltage : 33kwmaterial : ceramic insulatorlow frequency flashover voltage(dry) : 110 kvlow frequency flashover voltage(wet) : 85 kvcolor : brown company details :- established in 2014 , radhamadhav engineers & traders has made a name for itself in the list of top suppliers of horn gap fuse, electrical transmission line goods in india. The supplier company is located in cuttack, odisha and is one of the leading sellers of listed products.radhamadhav engineers & traders is listed in trade india's list of verified sellers offering supreme quality of 11 kv horn gap fuse, 33 kv horn gap fuse etc. Buy horn gap fuse, electrical transmission line goods in bulk from us for the best quality products and service.                          

Type : High Tension Transformer

Certification : ISO 9001:2008 Certified, SSI

Application : Industrial Use

Color : White

Condition : New

Frequency : 0-50Hz, 100-200Hz, 200-400Hz, 50-100Hz

Tensile Strength : 0-25Mpa, 125-150Mpa

Feature : Easy To Install

Foot Check Valves</strong> are designed to allow flow of liquid only in one direction. We are an eminent Manufacturer and Supplier of Foot Check Valves in West Bengal.&nbsp; The Foot Check Valves we make available are generally placed at the lower end of the suction pipe of a pump. We are capable of delivering bulk orders of the Foot Check Valves within the stipulated time.

Size : 1.1/2inch, 1/2inch, 2inch, 3/4inch, 4/5inch, 5/6inch, 6/7inch)

Material : DUCTILE IRON BODY

Certification : ISO 9001:2008 Certified, SSI

Application : Water Fitting

Color : Black, Blue

Automatic Grade : Automatic

Pressure : Low Pressure, Medium Pressure

price list for ductile iron resilient seated gate valve d.i (ggg-50) resilient seated (soft seated, gate valves as pe is 14846/2000 pd. p.n 1.6 non-rising spindle of ss- aisi- 410 with g.m nut e.p.d.m moulded wedge 100% leak proof flanged drilled as per is: 15538 table iv & vi with fba coated with epoxy prints colour blue with hand wheel operted.

Size : 100-150mm, 150-200mm, 200-250mm, 250-300mm, 300-350mm, 350-400mm, 400-450mm, 450-500mm, 50-100mm

Type : Industrial Valves

Material : DUCTILE IRON

Certification : ISO 9001:2008 Certified

Application : Gas Fitting, Oil Fitting, Water Fitting

Weight : 20kg

Color : Sky Blue

Condition : New

Pressure : Low, Medium

Brand Name : IEC

Temperature Pressure : High Temperature Pressure

Valve Size : 2inch, 3/4inch,Other

Packaging Size : 10 Pieces

Media : Air

Actuation Type : Double Acting

Diameter (mm) : Other

Usage : Water Fitting

Country of Origin : India

ductile iron pipe is pipe made of ductile cast iron commonly used for potable water transmission and distribution. This type of pipe is a direct development of earlier cast iron pipe, which it has superseded.

Type : Ductile Iron Pipe

Diameter : 75-100mm, 80mm to 1000mm

Shape : Round

Thickness : 4.5-5mm, 5.5-6mm, 6.5-7mm

Certification : ISO 9001:2008 Certified, SSI

Application : Gas, Sewage, Supplying Water

Color : Black

Condition : New

Brand Name : Jai Balaji, Kejriwal

ductile iron pipe is pipe made of ductile cast iron commonly used for potable water transmission and distribution. This type of pipe is a direct development of earlier cast iron pipe, which it has superseded. .. Typically, the pipe is manufactured using centrifugal casting in metal or resin lined moulds.

Type : Ductile Iron Pipe Fittings

Shape : Round Shape

Thickness : 500mm to 5000mm

Certification : ISI Certified, SSI

Application : Pipe Fittings

Color : Black

Condition : New

Material : Iron, Cast Iron, Ductile iron

Brand Name : Jai Balaji, Kejriwal

Material : Ductile iron and Cast Iron

Dual Plate Check Valve is known for its high performance and durability. Our company is a nonpareil Manufacturer and Supplier of Dual Plate Check Valves in West Bengal. The Dual Plate Check Valves we make available are stronger, lighter and smaller than conventional swing check valve.  Our Dual Plate Check Valve uses a special unique design spring for significant improvement in valve response. Buyers can obtain the Valves at reasonable rates. Characteristic Features : Leak Proof Sealing Robust construction Low Pressure Drop Non Throttling Efect Trouble Free Service Inter Changeable Parts Easy Installation Long Life Service Low maintenance Gentle Closure Metal To rubber Seat   Additional Arrangement : Metal to Metal Seat Lifting Lugs Riveted Metal seat Resilient Seat

Material : Stainless Steel, CAST IRAN

Certification : ISO 9001:2008 Certified, SSI

Application : Water Fitting

Color : Blue, Red, Sky Blue

Brand Name : IEC

parent basic material cast iron, s.g. Iron, cast steel type of valve construction single small orifice, single large orifice, double large & small orifice, double large & small orifice with inbuilt isolating stop valve, kinetic double large & small orifice with separate isolating mitre bevel geared isolating sluice valve, tamper proof double orifice air valve. Manufacturing standard is : 14845, awwa c 512 fluid application clear water, sewage & effluent, raw water end flange standard is : 1538, is : 6392, bs : 10, ansi b 16.1, ansi gb 16.5, bs : 4504, awwa c 207 or any other std. Screwed end standard is : 554, bs : 4504, awwa c 207 or any other std. Screwed end standard is : 554, bspt, npt etc. Type of wedge solid & taper, flexible, double disc manufacturing range of size 25 mm to 200 mm, rating pn � 10, pn � 16 & pn - 25.

Size : 100-150mm, 150-200mm, 50-100mm

Type : Cast Iron Air Valve

Material : Cast Iron, CAST STEEL

Certification : ISI Certified, ISO 9001:2008 Certified

Application : Water Fitting

Weight : 10-15kg, 15-20kg

Color : Black, Blue

Condition : New

Pressure : Low, Medium

Brand Name : IEC

diaphragm valves are used on shut-off and throttling service for liquids, slurries and vacuum/gas. the seal is achieved by a flexible membrane, usually elastomer, and possibly reinforced with a metal part. The membrane is tensed by the effect of a stem/compressor with lineal movement until contact is made against the seal of the body. the operating parts of the diaphragm valve are isolated from the flow. This makes this valve suitable for viscous flows and also hazardous, abrasive and corrosive flows as its sealing system avoids any contamination towards or from the environment. diaphragm valves are available in a wide variety of metals, solid plastics, plastic, rubber and glass linings. They are well suited to the handling of multiple chemical applications both clear fluids as well as slurries. the diaphragm valve has an extended use for applications at low pressures and slurry fluid where most other kinds of valves corrode or become obstructed. it is a quick opening valve.   there are two types of diaphragm valves: • weir: the weir diaphragm valve can be used for either off/on and throttling services   • straightway: named also straight-thru is only used for on/off services. 

Size : 100-150mm, 150-200mm, 200-250mm, 250-300mm, 50-100mm

Type : Diaphragm Valve

Brand Name : IEC

Material : CAST IRON

Certification : ISO 9001:2008 Certified, SSI

Weight : 10-20kg

Color : Black

Butterfly Valves are designed to isolate / control the flow medium in both directions. We are an eminent Manufacturer and Supplier of Butterfly Valves in West Bengal. The Butterfly Valves offered by us feature robust construction and one stainless steel seat ring is fitted in the flow path. In order to meet the bulk and urgent requirements of buyers, we maintain a large stock of Butterfly Valves at our spacious warehouse.   Details : A robust circular disc is positioned in the center of the body. The disc is mounted on two hub stub shaft which swings through both the end body housing. A resilient / stainless steel seat ring moves inside the disc and one disc seat retainer is placed to retain it.   A gear / Hand lever operated driver shaft. In full open position it facilitate low interrupted bore flow path resulting in minor / low head loss.

Size : 1/2inch, 2inch, 40 mm to 700mm

Type : Wafer Butterfly Valve

Material : Cast Iron, Stainless Steel

Certification : ISO 9001:2008 Certified, SSI

Application : Water Fitting

Color : Blue, Red

Technics : Gear Operated

Port Size : 2cm-50cm

Brand Name : IEC

air cushion valve is a device to prevent collapse of pipe as well as bursting during sudden stoppage of pump or valve etc. It eliminates the chances of water hammer. Air cushion valve is provided with separate inlet and outlets for air. When a pumping machine stops suddenly, the water column travels forward due to its momentum. When the momentum is lost, it returns backwards and exerts a pressure at pump/valve. when the water column returns, it creates excessive pressure, which is the cause of water hammer. During this process, water column separates at various places creating vacuum. Air is required to fill the vacuum to prevent the pipe from collapsing in case of excess vacuum. Air cushion valves inhales the sufficient air at the time when water column separation takes place. Once the air is taken in and the water column starts returning, the air inlet is closed. Air is then compressed in between separated water columns. when air compression creates sufficient pressure, outlet valve opens, allowing air to escape under pressure. The outlet is further controlled by orifice controlled needle valve to limit the quantity of outgoing air. Thus the energy of water column is lost in expelling the air and an air cushion is formed in between the separated water columns. Due to this process the rejoining of water columns is very slow and increase in pressure at this moment is moderate. Our company is one of the trusted manufacturers and suppliers of air cushion valve in the market. We offer highly quality air cushion valves at the most competitive price range. highlights made by using optimum quality raw material high performance durable low maintenance details internal working parts ss 304 main body m.s. (as per is 2062) pressure pn 1.0/pn 1.6 sealing ring neoprene rubber size 80mm to 300mm

Size : 2inch, 40 mm to 300mm

Type : Air Cushion Valves

Material : M.S

Certification : ISO 9001:2008 Certified, SSI

Application : Water Supply

Color : Silver

Pattern : Plain

Condition : New

Automation Grade : Automatic

Brand Name : IEC