O Rings Dealers in Bauria, Howrah

• Size: 2inch, 4inch
• Material: Rubber
• Shape: Round
• Color: Black
• Feature: Accurate Dimension, Unbreakable
• Usage: Oxygen Cylinder

• Material: Silicone Rubber
• Shape: Round
• Thickness: 20-30mm
• Application: Connecting Joints
• Color: Multicolor
• Feature: Accurate Dimension, Fine Finish, Heat Resistant, Robust Construction

An O-Ring is a circular elastomer with a disc shaped cross section, measured by measuring the inside diameter of the O-Ring and cross-sectional thickness. O-Rings, offered by us, are designed to be put inside a groove and then compressed during assembly by two or more parts, creating a seal. Our O-Rings can be used for static and dynamic applications. We specially provide moulded O-Rings in standard or non-standard inside diameters, cross sectional thickness and shore hardness. We can also manufacture O-Rings in other materials such as: polyurethane and PTFE. We also offer machining specifications of cross-sectional thicknesses for different O-Rings. Note : Please consult fluid compatibility guide table link on our Charts and Calculators Menu. Available In Elastomers Such As : Silicone Rubber : (Abbreviations used- MVQ, FMQ, PMQ) It can withstand extreme temperatures i.e. from -60oC to 200oC and above, with PMQ down to -90oC. Silicon O-Rings usually have a shore hardness of 60. Ethylene Propylene Rubber : (Abbreviation used- EPDM) It is water resistant rubber and is capable of withstanding high temperatures (up to 180oC in steam for peroxide cures). EPDM rubber is also ideal material for brake fluid. It usually comes in a shore hardness of 70. Note : We also supply backup rings for O-Rings and Quad rings. Nitrile : (Abbreviation-NBR) At temperatures up to 100oC, or with special compounding up to 120oC, nitrile rubber provides an economic material having a high resistance to aliphatic hydrocarbon oils and fuels. Nitrile O-Rings are available in 70, 80 and 90 shore hardness. Viton® : 9Abbreviation-FKM) This is a family of rubbers designed for very high temperature operation. They can operate continuously somewhat in excess of 200oC depending on the grade, and intermittently to temperatures as high as 300oC. They have outstanding resistance to chemical attack by oxidation, by acids and fuels. They have good oil resistance. Viton O-Rings usually have a shore hardness of 80. Cross Sectional Sizes Available : O-Rings are usually supplied in the following Metric and Imperial cross sections : Metric : 1mm, 1.25mm, 1.3mm, 1.5mm, 1.6mm, 2mm, 2.4mm, 2.5mm, 3mm, 4mm, 5mm, 5.7mm, 6mm ,8 and 8.4mm. Imperial : 1.78mm, 2.62mm, 3.53mm, 5.33mm and 7mm. O-rings are available in various elastomers.

• Features: 50 % advance
• Brand Name: EURASIA
• Brand Name: EURASIA
• Material: Neoprene Rubber, Nitrile Rubber, Silicone Rubber, VITON,EPDM.POLURITHIN,PTFE
• Shape: Round, SQURE
• Color: Black, Blue, Green, Red, White, Orange,any
• Condition: New
• Application: Connecting Joints, Pipes, Tubes
• Size: 10inch, 2inch, 4inch, 6inch, 8inch, Any,any
• Feature: Accurate Dimension, Fine Finish, Good Quality, Heat Resistant
• Packaging Type: best
• Type: Rubber O Rings
• Diameter: any
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm, Any
• Country of Origin: India
• Warranty: 12 month

• Material: Plastic
• Shape: Round
• Color: Black
• Application: Industrial
• Feature: Accurate Dimension, Good Quality, Unbreakable
• Type: O Rings
• Country of Origin: India
• Brand Name: BRP

• Color: Brown, Grey, Red, White
• Automatic Grade: Manual
• Warranty: 1yrs
• Application: Commercial

Our company shares glorious credentials with the successful Manufacturers, Suppliers and Exporters of Back Up Rings. The Back Up Rings we make available are manufactured using hard, extrusion resistant material such as high-durometer Nitrile, Nylon, or PTFE. The Ring is designed to fit between an O-ring and an extrusion gap, to prevent the extrusion of the O-ring leading to O-ring failure. More about Back Up Rings Extrusion failure is one of the most common types of O-ring failure. When the internal pressure of an application becomes too great, the O-ring will actually extrude into the clearance gap. This extruded product will quickly be nibbled away causing a loss of material, and once sufficient material is lost, seal failure will quickly follow There are three options to prevent this : Reduce the clearances to lower the extrusion gap -This is the most expensive option. A cheaper solution is to raise the durometer of the O-ring. Although, a higher-durometer O-ring offers superior extrusion resistance, it is often not a feasible solution due to either material availability, or to the fact that harder durometer materials have limited low-pressure sealability. The last and best option is the addition of a Back Up Ring. While Back Up Rings are used in conjunction with O-rings in both static and dynamic sealing applications, the gland they fit in must be specially designed to fit both the O-ring and the Back Up.