Leader Valves Dealers in Hubli

Butterfly Valve is used to control and regulate the flow of Liquid or gas when installed in a pipe circuit. Butterfly valves are typically utilized in large line sizes in chemical services, waste and water treatment applications and fire protection systems. Due to the valve design, incorporating a small face-to-face dimension and lower weight than most valve types, the butterfly valve is an economical choice for larger line sizes (i.e. 8" and above). Additional advantages of the butterfly valve are standard face to face dimensions, relatively high coefficient of flow (CV) and their availability in chemically resistant materials. The butterfly valve complies with ASME face-to-face dimensions and pressure ratings. This enables the valve to be easily retrofitted in line regardless of the manufacturer. In addition, the small face-to-face dimension facilitates piping design. The ASME pressure classes adhered to 150, 300 and 600# allowing a maximum pressure of 1500 PSI. The butterfly valve is considered a high recovery valve, since only the disc obstructs the valve flow path. The CV is relatively high; the pressure drop across the valve is relatively low. Hence the pump size is minimized and system wear reduced compared to that of low recovery valves (i.e. globe valves). Sizes available : 50mm to 1000mm Range : The valves pressure rating ranges from 150# to 300# with Screwed end, Flanged end or Butt weld end. They are also available with Lever operation, Gear operator, electrical actuator and Pneumatic actuator. Material used : Cast Iron, Carbon Steel, Stainless Steel, Duplex, Super Duplex, Monel, Hast alloy, etc

• Size: 15mm to 250mm
• Type: 2 way / 3 way (Full port/ Reduced Port)
• Operation: Lever, Gear, Pneumatic & Electric Actuator
• Material:: A105, WCB, CF8, CF8M
• Seat: PTFE, RPTFE (CFT), PEEK, Metal
• Rating: Class 150, 300, 800
• Ends: Screwed, Socket weld, Butt weld, Flanged
• Testing: As per API 598/ BS EN 12266

Trunnion Ball Valve Design Std.: BS EN ISO 17292 (BS 5351), API 6D., Face to Face (For Flanged End Only): ASME B16.10, EN 558-2., Testing Std.: API 598, BS:6755-1, EN 12266-1, Body & Insert Material: WCB, CF8, CF8M, CN7M, CS, 304, 316 etc., Ball Material : 410, 304, 316, CA15, CF8, CF8M, CN7M etc., Stem Material: 410, 304, 316, 17-4PH etc., End Connection: Flanged, Screwed, Socket.

Ball Valve Provide Tight Shut-off and Character Control. They have High Range Ability Due to the Design of the Regulating Element, Without the Complications of Side Loads Typical of Butterfly or Globe Valve. We Manufacture and Export a Wide Range of Ball Valve.

We are manufacturing from 15 mm to 600 mm Swing Check Valves in Class 150,300,600,900 & 1500. For all applicationService Media

We have gained expertise in retailing and wholesaling a wide range of ball valves.

We are well known exporters of rubber seated butterfly valve from India.

Microfinish Valves Pvt. Ltd. is one of the pioneer manufacturing & supplying company of ball valves, which are fully welded.

Ball Valves

Plug Valves, Ball Valves, valve actuator, Safety Relief Valves

Ball Valves, Check Valves, Bronze Gate Valves, Gate Valves, Forged Valves

Butterfly Valve, Ball Valve

Ball Valves, Carbon Steel Gate Valves, Cast Iron Butterfly Valve

Swing Check Valve

Ball Valves, ball valve spindles, precision cnc turned components

Ball Valves, Gate Valves, Check Valves, Butterfly Valves, Diaphragm Valve

Ball Valves, Cast Steel Gate Valves, Brass Ball Valves

Ball Valves, Check Valves

Ball Valves, Ball Valve - One Piece, Extended Bonnet Ball Valve

Plug Valves, Ball Valves, Choke Valves, Severe Service Control Valves

Ball Valves, Pneumatic Products, Compressed Air Filters, regulators

Ball Valves, Gate Valves, Check Valves, Industrial Valves