Gate Valves Dealers in Tarihal, Hubli (18 products available)

• Sizes in mm(inch): Pressure Rating
• Flanged Ends, Butt Weld Ends:  
• 15 (1/2") to 900 (36"): Class 150
• 15 (1/2") to 600 (24"): Class 300
• 50 (2") to 300 (12"): Class 600
• 50 (2") to 300 (12"): Class 900, 1500 & 2500

We are offering cast gate valve.

The Gate Valve offered by us is used to control and regulate the flow of liquid or gas when installed to a pipe circuit. It is easily automated and available with positioners, limit switches and other accessories. The gate valve is known for precise throttling and control. Minimum and maximum temperatures are also very broad ranging from -425° F to 1100° F, depending again on the materials of construction. Sizes available : 15mm FB to 300mm FB Range : The valves pressure rating ranges from 150# to 2500# with Screwed end, Flanged end or Butt weld end. They are also available with Handwheel operation, Gear operator, electrical actuator and Pneumatic actuator. Material used : Cast Iron, Carbon Steel, Stainless Steel, Duplex, Super Duplex, Monel, Hast alloy, etc.

• Size: 50mm to 800mm
• Type: Uni – directional / Bi- directional
• Material: CI, DI, WCB, CF8, CF8M, CG3M, CF3M
• Ends: Wafer, Lugged
• Operation: Hand-wheel, Chain- wheel, Gear, Lever, Pneumatic or Electric Actuator
• Specials: Extended Stem, Closed Bonnet, Deflector cone, Soft seated, Purge connection
• Testing: As per MSS – SP 81

Our valued clients can avail from us the sturdy Extended Bonnet Gate Valves at reasonable prices. We have designed Extended Bonnet Gate Valve while keeping in mind the defined quality parameters. Extended Bonnet Gate Valve that we offer is able to work under extreme temperature & pressure. Highlights : Leak proof structure Designed for efficient transmission of chemicals, liquid and gas Fire safe Sturdy construction Easy to maintain Made of carbon steel, stainless steel and alloys Smooth finish

We Manufacture Gate Valve of Different Types. 'gate Valve' also Known as 'knife Valve' or 'slide Valve' are Linear Motion Valves in Which a Flat Closure Element Slides Into the Flow Stream to Provide Shut-off. Gate Valves and Knife Valves are Designed to Minimize Pressure Drop Across the Valve in the Fully Opened Position and Stop the Flow of Fluid Completely.

We are manufacturing from 40 mm to 600 mm Knife Edge Gate Valves for all applicationService Media as per MSS - SP 81 manufacturing Standard.

We are offers a wide range of Forged Steel Gate Valve.forged steel gate valves are available in various ranges.

We offer hopkinsons full bore & venturi gate valves. Pipeline isolation valves for a wide range of process applications. Valves can be fitted with customer choice of actuation. The parallel slide gate valves are produced in a wide range of sizes and designs (including venturi and full bore) for fluid isolation duties on steam raising plant and process systems throughout industry. The outstanding feature of the parallel slide design is that of maintained fluid-tightness without the aid of wedging action. No mechanical stress is exerted between the discs, and the valve is not subjected to dangerous strains on opening or closing.

We are offering Knife Edge Gate Valves with Rugged design,Wafer type, round port single piece construction,Soft or metal seat and many more.

Offering Gate Valves, Globe Valves, Swing Lift Check Valves. 1)Gate Valves- Size Range 15mm to 400mm Class 150# & 300# 2)Globe Valves- Size Range 15mm to 300mm Class 150# & 300# 3)Swing Check Valves- Size Range 40mm to 350mm Class 150# & 300# 4)Lift Check Valves- Size Range 15mm to 50mm Class 150# & 300# Materials of Construction: (Cast Steel & SS) in WCB, LCB, CF8, CF8M, CF3, CF3M & Higher Grades of Stainless Steel.

Bar Stock single Pc 15mm to 50mm, Bar Stock single Pc 15mm to 50mm

Cast Steel Gate Valves, Horizontal Check Valve, vertical check valves

Gate Valves, Needle Valves, Globe Valves, Check Valves

Forged Steel Gate Valves, forged steel lift check valve, Forged Check Valve

Globe Valve Stem, Worm Shaft, Valve

Plug Valve, Valve