Gate & Sluice Valves Dealers in Hubli

The Gate Valve offered by us is used to control and regulate the flow of liquid or gas when installed to a pipe circuit. It is easily automated and available with positioners, limit switches and other accessories. The gate valve is known for precise throttling and control. Minimum and maximum temperatures are also very broad ranging from -425° F to 1100° F, depending again on the materials of construction. Sizes available : 15mm FB to 300mm FB Range : The valves pressure rating ranges from 150# to 2500# with Screwed end, Flanged end or Butt weld end. They are also available with Handwheel operation, Gear operator, electrical actuator and Pneumatic actuator. Material used : Cast Iron, Carbon Steel, Stainless Steel, Duplex, Super Duplex, Monel, Hast alloy, etc.

Api Gate Valve Flanged Ends, Butt Weld Ends : 15 (12") to 900 (36"), Pressure Rating : Class 150, Design Std.: API 600, API 6D, ASME B16.34, Face to Face (For Flanged End, Butt Weld End): ASME B16.10, B16.25, Testing Std. API 598API6D, B16.34 Body & Bonnet WCB, WC6, LCB, CF8, CF8M, CF3M, CN7M wedge 410, 304, 316, 316L, CA15, CF8, CF8M, CN7M Stem 410, 304, 316, AL20 Seat 410, 304, 316, CF8, CF8M, CF3M, CN7M End Connection Flanged, Butt Weld End.

Fluidflow Tech Controls (india) Private Limited introduces cutting-edge Extended Bonnet Ball Valve. These Extended Bonnet Ball Valves are typically designed for such industries where efficient & safe handling of chemicals and gases is of paramount importance. Our Extended Bonnet Ball Valve has witnessed high demand, owing to its remarkable performance and longer service life. Highlights : Leak proof structure Fire safe Sturdy construction Easy to maintain Made of carbon steel, stainless steel and alloys Smooth finish Designed for efficient transmission of chemicals, liquid and gas

• Brand Name: Fluidflow Tech-Controls

We are offering ball valve with extended bonnet instead. Features benefits regular bore, full bore improved seat for long life and bubble tight shut off. Live loaded stem design. Single piece blow out proof stem. Fire-safe test requirements of api 607 and api 6fa designed to handle most severe cryogenic services.

We offer Low Pressure Loss Changeover Valves. Features Benefits •Starvalve RS Type is used to couple pressure Safety Relief Valves. Two designs are available : the "single way" and the "dual way". The unique design of this changeover valve allows a pressure loss below three percents; this is the requirement from the ASME and API to avoid pressure safety valve chattering. Design •ASME B16.34 •ASME B16.5 or EN1759-1 or EN1092-1 Flange Drillings •Sizes : inlet 2" to 12" - outlet 1" to 8" •Set Pressure range : up to 100 barg •Temperature range : -196°C to +427°C •Materials : Carbon, Alloy or Stainless Steels Approvals •CE marking PED 9723EC •CE marking ATEX 944EC •ISO 9001 •ISO 14001 •SELO •Rostechnadzor

• Size: 50mm to 800mm
• Type: Uni – directional / Bi- directional
• Material: CI, DI, WCB, CF8, CF8M, CG3M, CF3M
• Ends: Wafer, Lugged
• Operation: Hand-wheel, Chain- wheel, Gear, Lever, Pneumatic or Electric Actuator
• Specials: Extended Stem, Closed Bonnet, Deflector cone, Soft seated, Purge connection
• Testing: As per MSS – SP 81

We Manufacture Gate Valve of Different Types. 'gate Valve' also Known as 'knife Valve' or 'slide Valve' are Linear Motion Valves in Which a Flat Closure Element Slides Into the Flow Stream to Provide Shut-off. Gate Valves and Knife Valves are Designed to Minimize Pressure Drop Across the Valve in the Fully Opened Position and Stop the Flow of Fluid Completely.

We are manufacturing from 15 mm to 600 mm Gate Valves in Class 150,300,600,900 & 1500. For all applicationService Medias.

Carbon Steel Gate Valves, Ball Valves, Cast Iron Butterfly Valve

We are offers a wide range of Forged Steel Gate Valve.forged steel gate valves are available in various ranges.

We are offering Knife Edge Gate Valves with Rugged design,Wafer type, round port single piece construction,Soft or metal seat and many more.

We offer hopkinsons full bore & venturi gate valves. Pipeline isolation valves for a wide range of process applications. Valves can be fitted with customer choice of actuation. The parallel slide gate valves are produced in a wide range of sizes and designs (including venturi and full bore) for fluid isolation duties on steam raising plant and process systems throughout industry. The outstanding feature of the parallel slide design is that of maintained fluid-tightness without the aid of wedging action. No mechanical stress is exerted between the discs, and the valve is not subjected to dangerous strains on opening or closing.

Offering Gate Valves, Globe Valves, Swing Lift Check Valves. 1)Gate Valves- Size Range 15mm to 400mm Class 150# & 300# 2)Globe Valves- Size Range 15mm to 300mm Class 150# & 300# 3)Swing Check Valves- Size Range 40mm to 350mm Class 150# & 300# 4)Lift Check Valves- Size Range 15mm to 50mm Class 150# & 300# Materials of Construction: (Cast Steel & SS) in WCB, LCB, CF8, CF8M, CF3, CF3M & Higher Grades of Stainless Steel.

Ball Valves, valve actuator, Safety Relief Valves, Knife Edge Valve

Cast Steel Gate Valves, Ball Valves, Brass Ball Valves

GTV WEDGE suiting and seal welding, Bar Stock single Pc 15mm to 50mm

gauge safety valves, Surgical Instruments, Diagnostic Instruments

Forged Steel Gate Valves, forged steel lift check valve, Forged Check Valve

Gate Valves, Ball Valves, Needle Valves, Check Valves, Bronze Gate Valves

gas compressor relief valves, Compressor Spares, gas compressor valves

Ball Valve, Butterfly Valve, Plug Valve

Gate Valves, Ball Valves, Needle Valves, Check Valves, Industrial Valves

Gate Valves, Check Valves, Ball Valves, Butterfly Valves, Diaphragm Valve

Globe Valve Stem, Worm Shaft, Ball Valve

Needle Valve, Ball Valve, bellows sealed globe valves, Check Valves

Fittings, Sand, Cement, Pipe, Steel Rod, Stainless Steel Sheet

Industrial Valve, Ball Valve, Butterfly Valves