AMT Powertransmission Sai Baba Nagar, Hyderabad, Telangana

JA, SH, SDS, SD, SK SF E, F, J, M, N, P, W, S. Material Used: Steel, Cast Iron, S.G. Iron

Type : Weld Hubs

Material : Steel, Cast Iron, S.G. Iron

Type : Variable Speed Pulley

Material : GC - 20

Brand Name : AMT

When the drive shaft is subjected to torsion strain. Torsion shafts are used to take the twist load. High mechanical flexibility - Curved tooth profile.Open Die Forging with no blow holes. Case Steel is also made on special request.

Type : Torsion Shaft

Material : Steel IS 1020/Forged

We offer a quality range of Timing pulleys that are fabricated as per the international quality standards and are extremely easy to install .owing to their precision design these timing pulleys are widely in demand in the market. Technical specification of Timing Pulleys,S Type, AXL, XL, H, XH, XXH. Metric Standards include T12.5 /T15 /AT10SIZES : 03M PITCH 10 TO 72 TEETH05M PITCH 12 TO 72 TEETH08M PITCH 22 TO 192 TEETH14M PITCH 28 TO 264 TEETH20M PITCH 34 TO 264 TEETH

Type : Timing Pulley

Material : Cast Iron, Gr 20 / 22

Brand Name : AMT

Supplied in Taper lock version for easy changeability. The torsion load is taken by the tyres which allow maximum flexibility.  

Type : Taper Lock Grip Version

Material : GC - 20 / Forged Steel for Special Application

Brand Name : AMT

Easy changeability of Pulleys with minimum maintenance costPulley "A" Section [From 1 Groove to 5 Groove] Pulley "B" Section [From 1 Groove to 6 Groove]Pulley "C" Section [From 2 Grooves to 8 Grooves]

Type : Taper Lock Grip Pulley

Material : GC-20, GC - 22 on Request

Brand Name : AMT

These are pulleys with steps and are basically with 2step,3step& 4step style. Pulleys shall be supplied with or without Key way & with ( 5/8”- 3/4” Bore -- 3/16” x 3/32” Keyway) & 9” Bore -- 1/4” x 1/8” Keyway.

Type : Stepped Cone Pulley

Material : Cast Iron Gr 20

Brand Name : AMT

These are non standard pulleys that are to be made as per the order requirement, or as per drawings or as samples given by the customer.

Type : Split Pulley

Brand Name : AMT

Material : Cast Iron Gr 20

JA, SH, SDS, SD, SK SF E, F, J, M, N, P, W, S. Material Used: Steel, Cast Iron, S.G. Iron

Type : QD Bushes

Material : Steel, Cast Iron, S.G. Iron

Brand Name : AMT

Multi-Pull Ribbed belts offer high power capacity in a single flexible low stretch belt. The continuous high tensile synthetic cord makes maximum utilization of the face width and ensures a uniform tension throughout the belt.There are 5 ranges offered.  

Type : Poly V Pulley

Material : Cast Steel, Cast Iron, Teflon

Brand Name : AMT

It is a supply condition to facilitate shaft fitment.

Type : Pilot Bore Type

Material : GC - 20 / Forged Steel for Special Application

Brand Name : AMT

It will supply by Pilot Bore.These couplings basically compresses of hardened grid springs which connects two hubs through axial cut grooves around the peripherals of the two hubs. The Hubs are made from Graded cast iron.  

Type : Pilot Bore

Material : Graded Cast Iron

Brand Name : AMT

These Pulleys are supplied with Pilot bore & are mostly used for commercial application The bores are enlarged at the user end.  

Type : Pilot Bore Pulley

Material : GC-20

Brand Name : AMT

Supplied in pilot bore condition to enable customer to enlarge the bore to the required size.  

Type : Pilot Bore

Material : GC - 20

Brand Name : AMT

Non Standard Pulleys are custom built to specification. We are pioneers in manufacturing and supply of non standard pulleys up to 1 to 1.5,T in weight & diameters including 2meters & up to 24 grooves. We have Retired engineers from Ex Fanner to design the required Ribs & torsion velocity to meet the requirements & the needs of Cement Industry, Sugar Industry ,Textile Industry, Power Sector & so on.We use graded cast Iron & cast steel on special request. Our delivery is Time bound & committed. We under take Static and Dynamic balancing at a special price.

Type : Non Standard Pulley

Material : Cast Iron Gr 20

Brand Name : AMT

A Motor Base Plate is a Sole Plate grouted into a concrete foundation in order to provide vibration support and leveling support for a machine, such as a pump or a compressor. Depending upon the design engineering, there are usually bolt holes or pre-installed anchor bolts required to secure the feet of the machine to the machined plate. Often times, leveling pads or steel footings or shims are required in order to adjust to a flat, level surface during installation.

Type : Motor Base Plates

Material : Fabricated Steel, Sheet Metal

JA, SH, SDS, SD, SK SF E, F, J, M, N, P, W, S. Material Used: Steel, Cast Iron, S.G. Iron

Type : Locking Assemblies

Material : Steel, Cast Iron, S.G. Iron

Brand Name : AMT

Type : Gears as per Customer requirement

Material : Steel

These are supplied as per the requirement of the customer for easy fixing of the flanges.  

Type : Front Side Locking (AF - Type)

Material : GC - 20 / Forged Steel for Special Application

Brand Name : AMT

These are industrial Pulleys .These flat belts stayed tracked on pulleys without any guides or flanges. The key to keeping a flat belt tracking on its own is the use of "crowned pulleys". A crowned pulley is a pulley that has a slight hump in the middle, tapering off ever so slightly towards either edge. That is how a crowned pulley keeps the belt from slipping.  

Type : Flat Belt Pulley

Material : Cast Iron, S.G. Iron

Brand Name : AMT

The supply condition of these pulleys are in finished bore and key way and are ready to fit and use condition. These pulleys are made as per the individual order received.  

Type : Finished Bore with Keyway Pulley

Material : Cast Iron Gr 20/22

Brand Name : AMT

Made as per customer requirement. It will comes in both TLB Version and Non TLB Version.Range of 17 sizes, with power rating from 0.22 Kw to 132 Kw at 100 rpm  

Type : Finished Bore with Keyway Type

Material : GC - 20 / Forged Steel for Special Application

Brand Name : AMT

RAPID DRIVES Roller chain Flexible Couplings are compact, all steel, long lasting flexible couplings, capable of transmitting relatively high torques with minimum of space consumption. Consequently, they provide a most economical means of positive transmission of power from one shaft to another.

Type : Chain Sprocket

Material : Steel

Brand Name : AMT

JA, SH, SDS, SD, SK SF E, F, J, M, N, P, W, S. Material Used: Steel, Cast Iron, S.G. Iron

Type : Bolton Flanges

Material : Steel, Cast Iron, S.G. Iron

Brand Name : AMT