Analytical Instruments Dealers in Hyderabad

• Type: High Pressure Liquid Chromatography System
• Certification: ISO 9001:2008
• Condition: New
• Warranty: 1year
• Country of Origin: India
• Usage: HPLC Washing Pump

Single piston pump with flow rate of 0.02‑10.00 ml/min and limit of maximal working pressure at 40 MPa is suited for columns washing and columns regeneration process in liquid chromatography. It is designed with piston diameter of 1/8”. This pump may be used in classical analytical applications where pulsation does not matter. Pulsation can be eliminated by pulse dampers. Completely new concept of electronic control and drive of pump allows using it as standalone unit, as well as in PC controlled systems. OLED display allows to watch (also from a distance) actual pressure or flow rate settings. When working with buffered solvents, it is possible to use piston back washing. Intuitive operating using simple keypad allows easy selection of functions for both pump version: •flow rate •maximal flow rate - PURGE (for priming and washing) •display brightness • pressure unit change (MPa, PSI, bar)  

• Features: High Efficiency, Wide Application, Easy Operation, Minimum Analysis Cost
• Method: US/EPA 7473, ASTM D6722
• Principle: Sample Thermal Decomposition, Atomic Absorption
• Instrument control: External PC computer system
• Sample types: Liquid or solid
• Max. Sample Volume (Liquid)*: 1000 µl (ceramic boat), 1500 µl (nickel boat)
• Max. Sample Weight (Solid)*: 1000 mg (ceramic boat), 1500 mg (nickel boat)
• Light Source: Low pressure mercury lamp
• Hg wavelength: 253.65 nm
• Detectors: UV enhanced photodiodes (2)
• Number of samples: 70 with small or large boats
• Detection limit: 0.001 ng Hg
• Working Range: Automatic scale change / Dynamic range 0 ng – 1500 ng Hg
• Repeatability: <1.5 % @ 10 ng Hg
• Typical Analysis Time: 5 minutes
• Sample treatment: Drying time Decomposition time Waiting time Adjustable from 1– 999 s 1– 999 s 1– 999 s
• Calibration: Standard solution or CRM
• Number of standards: Minimum 2 (blank & high), maximum 33
• Carrier gas: Oxygen
• Input pressure: 15 Psi (100 kpa)
• Peak flow: 300 ml/min
• Peak (W) -Energy consumption: 3000W
• Standby (W)-Energy consumption: <100W
• Power Supply: 110/220 VAC, 50/60 Hz

Vasthi Instruments are global leaders in manufacturing of Gas Analyzer, Water Analyzer, Voc Monitor,Gas Detectors, Dew Point Meter,Flue gas analyzer,Dust Monitor,Stack Gas Analyzers,gas detector,Mercury Gas Analyser,Hydrogen Gas,wireless gas transmitter,Hydrogen gas analyzer,AAQMS, CAAQMS and have been supplying instruments to customers worldwide.  

Vasthi Online Multi Gas Analyzers 8000 is one of the most powerful gas analyzers you can buy. The combination of multi gas emission analysis, differential pressure and temperature measurement reduces service costs and ensure the safe operation of appliances.The analyzer is rugged, reliable and flexible. By choosing up to six out of a choice of nine gas sensors, it can be configured to meet specific monitoring requirement. Data logging can be enable for remote analysis of emissions, with user configurable time periods.we are supplying gas analyzers in india wise.  

To keep a strict check on the quality of the products, we have hired professional quality analysts having rich domain experience. We are among the major players in the market offering top-notch UV Meter and that too at marginal prices.

• Application: Electrical Use,Measuring UV Lamp radiation
• Feature: Durable
• Display Type: Digital
• Power Source: Electric
• Warranty: 1Years

• Type: Ph Meter
• Certification: CE Certified
• Weight: 100-200gm, 200-300gm
• Color: Available in Many Colors
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic

We offer supreme quality Lab PH Meter that gives an accurate reading under various circumstances. The equipment is manufactured with the best in class materials available in the market and so clients can use these meters without any concern. This product has been tried and tested and their authenticity has been.

• Features: System is useful in measuring RaC in metal samples,Highly recommended for medium / large scale recycle steel industry having smelting furnaces.,1K/4K/8K channel resolution. Etc.

Radioactive contamination Analyzer (RaC) RA1006 is a laboratory instrument. It is highly recommended for Radio analytical labs. Additionally, it is also highly recommended for steel & foundry industry for their QA departments to measure RaC in their components products. System measure RaC in Bqg. Most of the portable hand held meters cannot measure contamination in Bqg. Also hand held meters may fail to detect very low levels of contamination less than 0.1 Bqg, unless carefully measured & interpreted. Whereas RaC measurement by this system is a fool proof method. This is a most sensitive equipment designed to record Gamma Spectra of the sample under study. This consists of a 3” X 3” NaI scintillation detector with Pre-Amplifier, High Voltage, Linear Amplifier Multi-Channel Analyzer System. Detector is covered by 5060 mm lead shielding to reduce background. This system can detect nuclide specific contamination in any steel alloy casting sample & quantify it also, in BqKg or Bqgm etc. Sample of Approximately 2kg in the form of small pellets in a cup of 3” dia. X 3” height can be placed on the detector for the measurement. System gives nuclide peak & area under the peak will quantify the contents in Bqgm..

• Application: Industrial Use, Laboratory Use
• Brand: VASTHI ENGINEERS PVT LTD
• Capacity: 15 KGS

Vasthi Instruments is the leading manufacturer of Hydrogen purity and Tri Gas analyzers in India. We utilize TCD sensors for accurate measurement of H2 gas levels in containers and the purging process.   Hydrogen Purity Analyzer uses sensors based on a reliable and stable thermal conductivity concept that provides high sensitivity and accurate analysis of two-phase gases. The Tri-Gas Analyzer Is Specifically Designed For Monitoring H2 Purity In The H2 Feed To A Power Generator And To Monitor The Purging Procedure During Shutdown. Portable Hydrogen Purity Analyzers (VHP-200) are intelligent gas analyzers for measuring gas based on the measurement of the thermal conductivity of the ambient gas. To compensate for the influence of temperature and humidity, these are measured separately, and a correction is made for them in the microcontroller.

• Type: Blood Gas Analyzer
• Certification: CE Certified, ISO 9001:2008
• Application: Blood Gas
• Weight: 0-5kg
• Color: White
• Feature: Accuracy, Digital Display, Easy To Carry, Highly Competitive
• Condition: New
• Automation: Automatic
• Brand Name: Radiometer
• Product Name: ABL
• Usage: Blood gas, electrolytes, metabolites
• Product: Blood Gas Anlyser

• Application: Laboratory Use
• Principle: Hydrophobic interaction
• Analytes: Organic molecules, biomolecules, ions and polymers

• Weight: 400-500g
• Display Type: Digital
• Automatic Grade: Semi Automatic
• Power Source: Battery
• Warranty: 1 Year
• Feature: Completely Tested, Perfect Result, Perfect Quality

• Brand Name: vasthi
• Model Number: VWA-3000 UV
• Place of Origin: india

Vasthi Instruments are global leaders in manufacturing of Portable Water Analyzer and have been supplying instruments to customers worldwide, Our multidisciplinary team of scientists, physicians, engineers, and regulatory consultants with decades of global experience brings you the quintessential mechanism that provides complete safety accuracy and durability.

• Brand Name: GE,GE
• Display Type: Digital
• Model Name/Number: Kelman Transport X2

primesil and targetsil ,flowrosil series hplc column is designed for most lc method development, including a wide range of different phases (c18, c8, phenyl, c4, c1, and cn as reverse phases, and cn, silica, nh2, and diol as normal phases). all the phases are made from monomeric organic silane to ensure exceptional batch-to-batch reproducibility and fast mass transfer. the different selectivity of primesil series phases allows customers to select the best column to achieve optimal separation.

Located in Hyderabad, Telangana, we are a leading manufacturer and supplier of PH Transmitters. Applauded for its long-working life and reliability, these PH transmitters are used in all types of Chemical-related industries. In order to meet the diverse requirements of our clients we offer special customization facilities. Our PH transmitters come with added advantages of stability and continuous duty cycle. As a reputed name in this industry, we undertake bulk exports also.

• Country of Origin: India
• Automatic Grade: Automatic
• Driven Type: Electric
• Brand Name: Fluke

At Risha Power Solution & Constructions, our TEGG-certified technicians know how and where to measure in order to gain precise insight into a plant’s power distribution. In a power quality analysis, technicians use diagnostic equipment to measure multiple parameters in real-time. These analyzers can measure harmonic values in voltage and amperage, voltage values, power factors, voltage and current unbalance, voltage variations and more.   Once the analysis is performed, the technicians study the data taken from the analysis to determine whether your facility’s power system is working as it should or if parts of the system need repair. To find out more about our process for power quality testing services, simply reach out to our team today to discuss testing options for your facility.

• Voltage Ranges: 6V or 12V selectable.
• Battery Types: GEL & Flooded (WET).
• Battery Sizes: 6V (1.2Ah - 10Ah) and 12V (1.2Ah to 100Ah).
• Display Type: Back lighted Bright LCD matrix
• Input Voltage: 4.8V.
• Voltage Resolution: 10mV.
• Dimens ions: 86 (W) x 250 (H) x 50 (D)

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.   Advanced design and precision manufacturing              – robust, long-life probe for process temperatures up to 800 °C (1472 °F)              – proven cell design from over 50 years experience              – fast response to process variations              – stable and accurate oxygen measurement   Unique integrated auto-calibration system              – easy compliance for emission monitoring regulation              – reduced installation costs; eliminates requirement for expensive external calibration panel              – reduced maintenance costs   Probe lengths up to 4.0 m (13.1 ft) and industry-standard flange configuration.              – suitable for a wide range of applications              – extensive installation options   Easy cell release              – fully site-serviceable probe              – easy access to internal components   Advanced transmitters              – easy configuration, monitoring and intuitive HMI              – HART communications              – cell performance logging and diagnostics

We are one of the leading manufactures & suppliers of digital ph meters, digital conductivity meters, digital potential meters...

Benchtop Model:ROTRONIC provides a high-end laboratory device – the HygroLab C1 – for water activity measurements with up to four probes. Connect station probes and insertion probes for measuring water activity in cheese, meat, tobacco, building materials, animal feed, pharmaceuticals products and much more. Validated softwareEasy-to-use and intuitive, the laboratory grade indicator can be used by anyone. HW4 running on a PC provides remote monitoring with charting and data recording functions. Portable Model: In many situations it can be very useful to measure water activity in production or storage rooms, e.g. inspection of bulk materials to ensure they meet specifications.

We are offering moisture analyser, moisture balance. Capacity : 50 g readability : 0.001 g moisture % : 0.01 % pan size : 90 mm data storage ir heaters temp. Range : 50 - 160 deg c

An Embedded micro controller – based precision instrument to help ensuring optimum operation of draying equipment. Ideal for precise Monitoring of moisture or Dew point in air or gas output from dryers systems or in process.

• Resolution: 0.01 pH
• Accuracy: ±0.02 pH
• pH Input: Impedance > 1012Ω
• Operating Temp: 0 to 60°C (32 to 122°F)
• Relative Humidity: 95% @ 40 °C, non-condensing
• Analog Output: Non-isolated - fixed range 0-14 pH = 4-20mA

a ph meter is an instrument used to measure acidity or alkalinity of a solution - also know as ph. Ph is the unit of measure that describes the degree of acidity or alkalinity. It is measured on a scale of 0 to 14. the quantitative information provided by the ph value expresses the degree of the activity of an acid or base in terms of hydrogen ion activity. The ph value of a substance is directly related to the ratio of the hydrogen ion [h+] and the hydroxyl ion [oh-] concentrations. If the h+ concentration is greater than oh-, the material is acidic; i.e., the ph value is less than 7. If the oh- concentration is greater than h+, the material is basic, with a ph value greater than 7. If equal amounts of h+ and oh- ions are present, the material is neutral, with a ph of 7. Acids and bases have free hydrogen and hydroxyl ions, respectively. The relationship between hydrogen ions and hydroxyl ions in a given solution is constant for a given set of conditions, either one can be determined by knowing the other. styrax manufactures micro processor based ph meter is an economical, user-friendly panel meter for ph measurement. Its small size allows for easy installation and will accommodate any ph electrode with bnc connector. Temperature compensation is either manual or automatic with use of any 1000ω platinum rtd.   emp. Compensation manual fixed resistors; automatic 1000 ω rtd display 4 digit, red led, 14.2 mm h (0.56") display range 0 to 14 ph connections bnc power requirements voltage: 115 vac ±15% standard (230 vac or 10 to 32 vdc optional)  frequency:50 or 60 hz  power consumption 2.5 watts max.

• Country of Origin: India

Vasthi’s handheld Flue gas analyser, Model-VE5400 offers the efficiency of complete combustion optimisation all the way to comprehensive measurement and customer data management. Our flue gas analysers cover the entire measurement and documentation requirement in process and flue gas testing with instant reading. Vasthi’s 5400 series is an ideal analyser that measures 5 gases with 4 sensors. User-friendly gases selection is implemented in this analyser. This handy analyser consists unique features. It has in-built crystal-clear touch display which enables user to view concentration values of flue gases and Bluetooth & Wi-Fi connectivity facilities. Using these facilities, Users can download the stored data as well as print it with any printer using Bluetooth/Wi-Fi. User can compare daily data with charts & graphs to optimize and increase the combustion efficiency.

• Model Number: Y-903
• Brand Name: Yamto
• Accuracy: 0.01 pH
• Type : Portable
• Features : High Stability and accuracy, Verious available designs, Property tested
• pH Range: 0 to 14
• Power: 1 X 9 V Battery
• Slope Correction: 80 to 120 %
• Compensation: Manual 0 to 100 degree
• Dimensions: 165 X 85 X 28 mm

• Resolution: 1
• Temperature: Range
• pH: Range
• 0 to 14: Readability
• 0.01: Accuracy
• ± 0.01*: Repeatability
• ± 0.01: Stability
• ± 0.05 in 8 hrs: EMF in mV
• Range: ± 1999
• Accuracy: ± 0.1% of Range or ±1 counts
• Repeatability: ± 1
• 0 to 100°C: Resolution
• 0.1 °C: Accuracy
• ± 0.5°C: Repeatability
• ± 0.1 °C: Compensation

Applications •  Stack testing according to USEPA methods 320 and 321 or European standards•  Process monitoring•  Formaldehyde emissions monitoring from biogas plants: VDI 3862 Blatt 8:2014-01•  Stack testing according to British Technical Guidance note M22: Measuring stack gas emissions using FTIR instruments, Environment Agency, Version 3, March 2012•  Reduction of greenhouse gas emissions by cattle -research   Description Gasmet™ DX4000 is a portable FTIR gas analyzer which is typically used in stack emissions monitoring, comparison measurements, catalytic process control and other applications where multiple gas compounds need to be accurately monitored in hot & humid sample gas. The corrosion resistant sample cell is heated to 180 °C, which ensures that the sample stays in gaseous phase even with high concentrations of H2O or corrosive gases.Gasmet™ DX4000 comes equipped with easy-to-use Calcmet™ software, which can display the concentration results in ppm, mg/Nm3 or Vol-%. All measurement data can be stored for further analysis.Gasmet™ DX4000 is typically set-up to measure H2O, CO2, CO, NO, NO2, N2O, SO2, NH3, CH4, HCl, HF and different VOC´s. Additional gases can be added without any hardware changes. Measurement ranges can be selected from sub-ppm until vol-% level.Gasmet™ DX4000 can be supplied with the Gasmet™ portable sampling system. This system utilizes hot-and-wet measurement principle (no drying or dilution), which ensures that the analysis is done with a representative sample. There are two stage particulate filtration: first one in sampling probe (2 µm) and second one in sampling system (0.1 µm).The portable sampling unit can be optionally equipped with a ZrO2 sensor for accurate oxygen measurement.Gasmet™ DX4000 has received the coveted MCERTS certification for stack emissions monitoring. There is also VDI 3862 standard for measuring formaldehyde emissions from biogas plants in Germany.Key Advantages:  Easily configurable application for new gas components Post-measurement data processing tools are unique to Gasmet Wide range of applications