Anti Collision Device Dealers

Infra System offers Anti Crane Collision Switch that is designed to avoid the collision of two adjacent cranes in the same bay running on the same rails. This system when installed on the two adjacent cranes will avoid the collision of two cranes. The system works on the principle of retro -reflective infrared waves. It consists of an emitter and sensor module and a special reflector.

• Finishing: Polished
• Application: Industring Use, Fitting Use

Orange Machinetech offers crane safety load indicators and modern anti-collision devices that ensure your construction project is absolutely safe and functionally efficient. Our products are designed to meet the exact demands for which people desire quality and perfection in a site where accidents need to be minimized. These are available in both sales and rental.

• SUPPLY: 20 TO 23OVAC,5OHz
• OUTPUT :: WARNING + STOP CONTACT

SUPPLY : 20 TO 23OVAC,5OHz OUTPUT : WARNING + STOP CONTACT SENSING RANGE ADJUSTABLE FROM 1 TO 15 METER SUITABLE FOR OVERHEAD CRANE, ZIB CRANE, TROLLEY ETC.

• Material: MS
• Operating Temperature: 20- 75 Degree
• Voltage: 220 V - 380 V
• Frequency: 50 Hz
• Sensing Distance: 1.5 mtrs. to 15 mtrs.

• Output: Potential free contact rated at 5 Amp @ 230V AC
• Supply: 110 V AC & 220V AC, 50 Hz
• Range: 3 / 10 / 15 / 20 /30 Meters Available
• Indication: LED

The Anti–Collision Device (ACD) is a self-acting microprocessor-based data communication device designed and developed by Embicon Tech hub for Application of Crane Anti collision system. For Laser base EOT Crane Collision avoidance system and make crane safety. Embicon is leading manufacture of Crane spare and safety Device. The Anti-collision system is a safety device to avoid to collision of two electric overhead traveling cranes working on the same rails. For one pair of cranes two sets of anti-collision systems are required. Each set consists of an Emitter/sensor module and a Reflector.The System works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm signal and stops/reduces the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 3 to 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty. Laser Alignment Tool for alignment of reflector and control unit.Terminal Strip Connections:1. P – Phase 220V AC CAUTION : Connect 110V / 220V AC2. P – Phase 110V AC at appropriate terminals.3. N – Neutral Never connect 220V AC supply4. E – Earth to 110V AC terminal No. 25. NC -OUTPUT – Normally closed contact6. C -OUTPUT – Common7. NO -OUTPUT – Normally open contact

• Brand Name: Powermech
• Application: EOT Cranes
• Country of Origin: Made in India
• Supply Voltage: 110 V AC or 220 V AC (User Selectable).
• Output: Potential Free Relay Contacts
• Model Name/Number: Model: ACC 03, ACC 10, ACC 102, ACC 122.
• Distance: 0-3 to 0-10 and 12 Meters
• Laser Alignment Tool: Provided for Alignment of Sensor and Reflector.
• Contacts Rating: 5 Amps ( max. ) at 220 V AC
• Output Connections: Through Terminal Strip
• Range Adjustment: Provided ( Up to 50 % Approx. )
• Dimensions: 180 mm X 145 mm X 55 mm
• Housing: Metal Housing

• Brand Name: Top Crane
• Material: IP-55
• Application: Eot Crane
• Country of Origin: Made in India
• Model Number: ACC03 and ACC10
• Voltage: 440v
• Alarm Signal: 10 Meters
• Measuring Range: 1 to 10 mtrs
• Sensors At Distance: 3 Meter

anti collision device for eot crane

We are also manufacture Anti Collision Device for EOT cranes

We are one of the reputed organization engaged in providing superior quality Anti Coilision Device. These Coilision Devices are good demand in the market due to high quality and durability. These products are available in market at competitive rates

• Brand Name: Electro power

We are offering anti collision device. The system works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm signal and stopsreduces the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 3 to 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty.

The Anti-collision Device is a safety device to avoid to collision of two electric overhead traveling cranes working on the same rails. The System works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm signal and stops/reduces the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 3 to 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty. Each set consists of an Emitter/sensor module and a Reflector. For one pair of cranes two sets of anti-collision systems are required

We are offering anti crane collision switch the anti crane collision switch is designed to avoid the collision of two adjacent cranes in the same bay running on the same rails. This system when installed on the two adjacent cranes will avoid the collision of two cranes. The system works on the principle of retro -reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activates an alarm signal and stops reduces the speed of the crane . Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The distance between the reflector and the sensor to detect the presence of infrared waves can be adjusted with the help of the potentiometer provided on the system. The maximum distances between the two cranes to generate the alarm signal can be maximum 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty. specifications: measuring range: 1 to 10 mtrs sensors at distance: 3 meter alarm signal: 10 meters

The ANTI COLLISION DEVICE system works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector which reflects these infrared waves back and activates an alarm signal and stops reduces the speed of the crane. Thus if the two cranes are away from each other the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is specially designed for the crane application and is suitable for the continuous duty.

The Anti-collision Device is a safety device to avoid to collision of two electric overhead traveling cranes working on the same rails. The System works on the principle of retro-reflective infrared waves. It consists of an emitter and sensor module and a special reflector. The emitter emits the infrared waves in the direction of the reflector. The reflector reflects these infrared waves back to the sensor. The sensor senses the presence of these reflected infrared waves and activities an alarm signal and stops/reduces the speed of the cranes. Thus if the two cranes are away from each other then the reflected waves will not reach the sensor and the cranes operate normally. The sensing distance is adjustable between 3 to 10 meters. The anti collision system is specially designed for the crane application and is suitable for the continuous duty. Each set consists of an Emitter/sensor module and a Reflector. For one pair of cranes two sets of anti-collision systems are required

• Material: Metal
• Application: In automobiles,cranes
• Power Supply: 110V AC to 230V AC

Its patented Anti Collision Devices (ACDs) by September this year. The tests and evaluation will be carried out by an independent agency, the Electronics Test and Development Centre, at Chennai. The ACD devices that can be mounted on rail locomotives and can also be deployed along the tracks, use UHF (Ultra High Frequency) radio signals and GPS to automatically activate braking systems on trains that come within 3km of each other on the same track. Codenamed ‘Raksha Kavach’, ACDs are meant to provide an extra level of protection, in addition to the Railways’ existing system of signals and interlocking systems.

Anti Collision Device System is designed to avoid the collision of two adjacent cranes in the same bay running on the same rails. The anti collision system is specially designed for the crane application and is suitable for the continuous duty. Avoiding collisions results in reduced maintenance costs and increased operator safety. Each system consists of an Emitter or a sensor module and a reflector. The emitter or a sensor module is installed on one crane and the corresponding reflector is installed on the other adjacent crane. This system is ideal for use with all types of cranes with adjustable frequency drives, soft starters, or contactor controls.   Features: Avoids crane accidents and protects property, production and people Fail Safe operation due to improved function Cuts crane repairs, downtime and costs Easy and straight forward to install Maintenance free

• Material: ALLUMINIUM
• Crane Type: EOT CRANE
• RED: BLACK