Batteries & Chargers Dealers in Hyderabad

Automatic SMPS Battery Charger that rolls off our manufacturing unit is designed innovatively and developed in compliance with the standards. Its performance is high, which we test at our end in an impeccable manner. We are often called the best Manufacturer and Supplier of Automatic SMPS Battery Charger in Telangana. We offer the charger in custom specifications, as per the client’s requirements.

• Country of Origin: India
• Application: Charging
• Color: Black
• Condition: New
• Driven: Electric

This  is a dual-channel 6S LiPo charger for industrial application drones. It is reliable, safe and easy to operate while with comprehensive functionality, like battery voltage meter, internal resistance meter, LiHV charging mode, also the time-saving synchronization mode. This charger is capable of balance charging 2 packs of 6 cell batteries simultaneously. It is specifically designed for the big battery pack.  The charger is equipped with master-slave control mode, which allows you to synchronize more than one charger when charging the same batteries. It uses advanced 32bits high-speed CPU from STMicroelectronics which improves its processing capability by 20 times.   Advantage High-Frequency Capacitor Active PFC Switched-mode Power Supply. Conformal Coating. Automatically Charging 12 Packs of Batteries in Sequence,Dual Ball Bearing High-Speed Cooling Fans. High-Density Fin-type Aluminum Heatsink. Maximized Safety Protection,Battery Internal Resistance Meter.   Key characteristic SkyRC PC1080 Charger High-Frequency Capacitor : Using high spec large capacitor ensures the charger can work properly for a longer period of time. Active PFC : Active PFC uses circuitry to correct the amount of power drawn to obtain the best ratio of power factor, achieving high efficiency, 93%. Which makes the product more stable and reduces the interference to the power grid. Switched-mode Power Supply : Accepts power from mains supplies throughout the world. Conformal Coating : Conformal coating helps electronics withstanding harsh environments, and protects them against moisture, dust, chemicals, corrosive attack and temperature extremes etc. It also ensures PC1080 has stable performance in the field. Automatically Charging 12 Packs of Batteries in Sequence : PC1080 pairing with G630 charging hubs, an automatic charging management system, can charge 12 packs of LiPo batteries in sequence, according to its remaining capacity (percentage), the one with the highest capacity will be charged first. Dual Ball Bearing High-Speed Cooling Fans : Dual ball bearing high-speed cooling fans with wing type blades design, provides good ventilation and a cool working condition. High-Density Fin-type Aluminum Heatsink : Fin-type design, large surface, greatly improved heat dissipation, ensures long-time stable working performance. Maximized Safety Protection : It has short circuit protection, reverse polarity protection and over-temperature protection. And it complies with required regulations of CE, RoHS, FCC, proving to be safe and reliable for the designed usage. Battery Internal Resistance Meter: With this function, the internal resistance of each cell will be displayed on the screen. Internal resistance is a key feature which reflects the health status of the battery, the lower internal resistance indicates the higher battery quality. Also, this value can help you pair your batteries.

• Application: Charging, Power Converting
• Warranty: 1year
• Driven: Electric
• RIPPLE-RMS: <100mV
• CURRENT LIMIT: 120% of the rated current
• EFFICIENCY: Better than 80%

Our name figures in the list of the topmost manufacturers and wholesale suppliers of SMPS Battery Charger from Telangana, India. We pride in having an advanced manufacturing unit, and a team of well-qualified workers, who work hard and meet the requirements of our esteemed clients. We don't compromise on quality, and process the SMPS Battery Charger using optimum quality materials. While the SMPS Battery Charger is essentially a switched-mode power supply that incorporates a switching regulator in order to be highly efficient in the conversion of electrical power. The SMPS Battery Chargers are in high demand as they guarantee long functional life, uninterrupted services, and high performance.   Features : Output Voltage: 24V/5A SMPS   Output, Programmable) Servo Stabilizers, SMPS, Battery Chargers As Per Customer Requirement : OUTPUT VOTLAGE - O/P Voltage (Will depends on your requirement) LOAD CURRENT - O/P Current (Will depends on your requirement) INPUT VOLTAGE - 230V AC, +/-10%, Single Phase, 50Hz LINE REGULATION - 1% LOAD REGULATION - 5% PROTECTIONS - Unit is protected against input surges Output is protected against over loads andcontinuous short circuits INDICATIONS - AC ON LED One DC ON LED One 3 ½ Digit digital volt meter for output voltage. One 3 ½ Digit digital current meter for output current. CONTROLS - One ON/OFF switch to ON/OFF the unit. One potentiometer with lock nut to set the output voltage at required level TERMINATION - Output is terminated on binding terminals provided on Front Panel

• Features: Time tested analog designs for more than three decades.,DSP controlled model that meets the requirements for new generation systems.

Thyristor based battery charger uses Thyristor switching principle for achieving the desired DC output. It basically consists of a transformer, a semi-conductor bridge rectifier, a filter circuit and a control circuit. The AC mains voltage is transformed to a suitable level and fed to the rectifier bridge. After being smoothened by the filter circuit, it rectifies the AC input and feeds controlled DC output to the battery and load. The power output requirement is adjusted by using phase control technique which is provided by the control circuit. The feedback signals from the output to the control circuit are used for maintaining voltage regulation and current limit.

• Brand Name: B3
• Output Voltage: 3.7V / 7.4V / 11.1V
• Number of Batteries Charged: 3
• Battery Type Charged: LIPO

• Brand Name: RESQ
• Power: 10 to 30 kVA
• Charge Current: 4 A, 8 A, 12 A
• Phase: Single, Three
• Voltage Rating: 230 V, 440 V
• Efficiency: 92 %
• Frequency: 47 to 64 Hz
• Protection: IP20

To maintain the high-quality standards, we follow strict quality standards throughout. Premium grade, cost-effective prices and unsurpassed standard distinguishes our smps battery chargers from others in the marketplace.

We make available in the markets a huge gamut of battery chargers. battery chargers that we manufacture and supply are extensively used in lead acid batteries. The facility of customization is also possible to meet the exact requirements of the customers. Consequently, we are identified as one of the trustworthy battery chargers manufacturers and suppliers based in india. voltage range : 12v24v features : compact designhigh efficiencyconsistent performancedurablelight in weightuser –friendly operation minimal maintenance

We are engaged in manufacturing of high grade Batter Charger with 1% to 2% ripple and alarm function. Our Battery Charger is made up of hi-tech components that influence long functional life and consistent performance. Range SCR Controlled Automatic ChargersDOT Power PlantsRedundant ChargersTransductor Controlled ChargersFloat-Cum-Auto Chargers & Boost ChargersManual Operated Chargers for railway application Alarm Functions High VoltageLow VoltageGround (-) FaultGround (+) FaultRectifier Failure ( each Diode or SCR )Hi-TempSingle PhasingLine FailureFan Failure ( in Forced Cooling System ) Components SCR controlManual tap SwitchSwitch controlDimmerstat controlTransductor control Salient Features Rugged ConstructionEnsure uninterrupted power supplyUseful for any volts and desired currentsResistant against moisture with IP-41 enclosureEconomical Our Strength We have developed 650 kW ( 7500 Amp. 0-70 Volts ) Transductor Control d.c.source for BARC for vacuum ARC Furnace that demands the short circuit conditions to create d.c. ARC.

• Feature: Fine finish, Compact design, High performance.

• Charge Channels:: 2
• Supported Chemistries:: Li-Ion, LiFePO4
• Compatible Battery Sizes:: 10440, 14500, 16340, 17670, 18350, 18500, 18650, 22650, 26650, 3V RCR123A
• Charge Current:: 1000mA
• Brand:: XTAR
• UPC:: 6952918326649

2-Bay Li-Ion/Li-Po Charger The VP2 from XTAR is a 2-bay battery charger that can charge Lithium Ion and Lithium Polymer batteries. With two independent charging channels, you can switch between three voltage options and three different charging current options, making the VP2 a true versatile battery charger. The switchable LCD display gives you real time information for the charging voltage and battery status. Also, you don't have to worry about shorting out the batteries or the charger because there is reverse polarity protection and a short circuit protection board. Reviving overly discharged batteries is also possible with the VP2. If you are looking for a Li-Ion/Li-Po battery charger with lots of safety features and options, the the VP2 is the way to take charge.Features: Two independent charging channels Compatible with Li-Ion 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 22650, 25500, and 26650 batteries Switchable LCD indicator to display the real-time charging voltage and battery status Reverse polarity and short circuit protection board Activation function for over discharging battery Algorithm (TC/CC/CV) charging system Three charging current options (250mA, 500mA, and 1A) Three charging voltage options (3.2V, 3.6V, and 3.8V) Revive overly discharged batteries Included accessories: US/EU/JP AC adaptor and DC car adapter Specifications:   USB output: 5.0V/1.0A Cut-off Voltage: 4.2V±0.05V Detection precision:±0.03V Input AC: 12V DC 1000mA 0.25A CC :250mAh±30mAh 0.5A CC :500mAh±50mAh 1.0A CC :1000mAh±80mAh Output: DC 3.0/4.35v 3.0v/3.2v LiFePO4 Battery Charger (Charges to 3.2v) 3.6v/3.7v Li-ion Battery Charger (Charges to 4.2v) 3.8v Li-ion Battery Charger (Charges to 4.35v) Dimensions: 4.6" (118mm) x 2.4" (62mm) x 1.3" (34mm) Weight: 3.35 oz (95g) 

• Type: Battery Chargers
• Application: Charging, Power Converting
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg
• Color: Black, Brown, Grey
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years, 6months
• Driven: Electric

Features Modular construction Input isolation transformer 2-Pulse (1-Phase) / 6-Pulse (3-Phase) thyristor rectifier bridge Fully digital microcontroller based control Soft start Automatic boost mode selection according to boost / float current set value Adjustable DC voltage & current settings Smoothing chokes & capacitor bank to reduce ripple Isolated current input to controller from hall effect current module Electronic battery current limit Battery reverse polarity protection Parallel redundant operation In-built DC distribution board Good dynamic response Options 12-Pulse thyristor rectifier bridge Additional reduction of output ripple below 2% RMS AC surge protection Fuse failure protection Annunciator based annunciation systems Silicon dropper diodes for load output regulation Deep discharge battery isolation contactor Digital meters RS-485 Modbus interface Remote control software DC Earth fault and additional alarms, meters and potential-free contacts Special colour and higher protection degree Temperature compensation for battery Top cable entry Applications Power plants Sub stations Industries Railways Offshore projects Petro-chemical Oil and gas pipeline systems

There is always a battery trickle on bikes so this helps charge the battery for your weekend ride. The Battery Tender Charger offers much more than a trickle charger could offer. It has a brain. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are! This unit replaces both the 021-0152 (BT Plus 8, 1.25A) in all markets.

• Type: Electric
• Brand Name: Sanjay Technical
• Input Voltage: 230 / 415v
• Output Voltage: up to 220V DC
• Usage/Application: Industrial
• Battery Type: VRLA / Ni-Cd / LA

Our Power Saver is an integrated system that is equipped with microcontroller based regulator to monitor voltage, current, power factor and, current threshold. It introduces low-loss impedance path between the source and the load that causes maximum power transfer in the path results in substantial power saving of power consumption up to 30%.

• Type: Battery Chargers
• Application: Charging
• Color: Black, Brown, Grey
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Warranty: 1year, 2years, 6months
• Driven: Electric

• Weight: 10 kg
• Application: Commercial Use
• Condition: New

The company is an eminent Manufacturer and Supplier of ARD Battery Charger (82V/1.2A) from Telangana. UPS Battery Chargers we make available are manufactured using quality-tested components and advanced technology. Once the batteries are full charged, our UPS Battery Charger enters auto cut off mode. Buyers are free to place bulk orders of the BATTERY Chargers with us and we ensure their timely execution. Technical Specifications Input 220V AC Output 82V/1.2A DC Short circuit Protection Boost up charging Auto cut off once batteries are full charged Rate of Charging is 10%. Scope of the Customers for 82V Charger Elevator industry Inverter manufacturers

Thyristor based battery charger uses Thyristor switching principle for achieving the desired DC output. It basically consists of a transformer, a semi-conductor bridge rectifier, a filter circuit and a control circuit.

Digital Battery Charger

Camera Batteries, camera chargers, Electronic Items, torch lights

Solar Battery Charger, Solar Photovoltaic System, Solar PV cells

Product Description The UMBER intelligent solar priority MPPT charge controller increases solar charging efficiency, reduces power costs and does not impact battery life negatively. Features : Maximum power point tracking (MPPT) is a technique that devices such as solar battery chargers use to get the maximum possible power from solar panels. Solar cells have a complex relationship between solar irradiation, temperature and total resistance that produces a non-linear output efficiency which can be analysed based on the I-V curve. It is the purpose of the MPPT system to sample the output of the cells and apply the proper resistance (load) to obtain maximum power for any given environmental conditions. MPPT maximizes the power harvested from the solar panels – efficiency improvement of 15-20% compared to PWM based conventional chargers Applications : The UMBER intelligent solar priority MPPT charge controller can be retrofitted with existing systems or can be used as part of a new system

Camera Charger, Camera Batteries, camera caps, camera filter, camera straps

Solar Battery Charger, Solar Photovoltaic Panels, Solar light fixtures

We are offering battery chargers. 24v, 10a battery charger

smps battery chargers, Home UPS, Inverters, servo stabilisers, Solar PCU

portable emergency charger, charger accessories, dynamo charger

Automatic SMPS Battery charger, AMF Panels, Diesel Generating Sets