Cartridge Heaters Dealers in Hyderabad

• Voltage: 220-240V
• Packaging Type: Box
• Length: 6 inch
• Heater Material: Stainless Steel
• Usage/Application: Industrial
• Temperature: 500 Degree C
• Tolerance: +/- 1mm
• Diameter: 50 mm

Cartridge heaters can be considered "component heaters" that are used to generate heat in many different applications. These process heaters are primarily used in mold and fit snug inside a cavity and helps heat solids by reaching high temperatures. Cartridge heaters have the versatility of being Cartridge heaters can withstand tough industrial usage; they can transmit up to 50 watts/in² heating capacity and are able to attain up to 300oc sheath temperature. In order to facilitate installation and heat transmission, cartridge heaters are made 1/4 inches less than the nominal size of the receptacle hole, with a tolerance of +/- 0.002 in. Standard cartridge heaters are supplied with electrical leads that are connected internally within a 3/8 inch cold section. In excessively hot applications, the length of this cold section could be increased.

Cartridge heaters are designed for moderate watt density with shock and vibration resistance. Close and even spacing between wire and inside of sheath is maintained for good heat transfer. Applications: Heating of Manifolds. Heating of Dies. Heating of Planets. Heating of Hot stamping. Packaging Machines. injection Mounding Machine Extrusion Machines.

MATRUSREE’S cartridge heaters are most frequently used for heating metal parts by insertion into drilled holes. For easy installation, the heaters are made slightly undersize relative to their nominal diameters i.e., the inner diameter of the hole can be between 0.15mm and 0.30mm larger than the cartridge diameter. The lesser the clearance between the heater and the bore diameter, the longer will be its life . Construction:   Construction Heater tip rolled to hold in place. Mica. Sheath Material: Stainless steel 3XX / Brass. Element wire situated in close proximity to outside surface for maximum heat transfer and minimum internal temperature while preserving good dielectric qualities. Magnesium oxide grain packing. Ceramic Porcelain support. Ceramic cap. Teflon insulated leads / Fiberglass leads / Post terminals Features: Wide variety of special requirements , sizes & Terminations Cartridge Heaters can be dual-voltage, three phase, and/or be supplied with a ground terminal & different termination styles, Low voltage (12 or 24 Volt) possible Braided Wire, straight or right angle exit available. Max temperature for SS tube 400 °C, for Brass tubes 200 °C. Diameters: Min 8mm to Max 45mm Length - Available in any desired length Choice of lead lengths       Application: Plastic molding Packaging equipment Heating tanks Plastic extruders Labeling machinery Gas and liquid heating

• Features: Available in extensive ranges and specifications , Equipped with the latest technology to maximize heat transfer , Unique winding design .

Our precisely engineered Cartridge Heater is extensively in demand amongst buyers around the country. Nichrome wire heating coils are inserted in the holes present in the ceramic tubes. Moreover, pure magnesium oxide filler is vibrated into the holes housing that allows maximum heat transfer to the stainless steel sheath. Our Cartridge Heater has a heliarc welded end cap inserted on the bottom of the heater. It is also installed with insulated leads. We offer Cartridge Heater at market leading price.

Band Heater, silica tube heaters, Temperature Controllers