Computer Monitors Dealers in Kukatpally, Hyderabad

Flameproof Oxygen Monitor AI-02-FLP is manufactured by Ace Instruments is a high exactness microcontroller based gas transmitters housed in flameproof aluminum LM-6 Body guaranteed by CIMFR, Dhanbad for use in Gas Group Areas I, II, IIA and IIB. The LED 4 digit display shows digital reading of oxygen gas focus in the scope of 0 to 25% Volume. Features:*  Based on Industrial Standard, 4-20 mA O/P with respect to gas concentration.*  Loop test is there and assures proper operation of the transmitter without calibration.*  Power on startup through an intelligent electronic and self-driven menu.*  Microcontroller Based Software Calibration.*  Calibration Possible in atmospheric air.*  Easy Programming with secured password protection*  Easy to read display and fast response.*  Built-in reverse polarity protection is present.*  Suitable in hazardous areas.*  ATEX, CCOE, CMRI, and IP-65 Approved.

• Country of Origin: India
• Type: Dust Monitoring System

Back Scattered Dust Monitor for Ideal monitoring opacity and smoke levels in the exhaust gas of industrial combustion or air filtration processes. It is a self-developed online dust monitoring device, which uses the mainstream technology of laser backscatter measurement with imported core components. Tribo Electric Dust Monitor is a real-time continuous indicative dust monitor with logging & alarm capability. It consists of a single probe for installation in silo or duct & a control Unit/logger.

• Country of Origin: India
• Measuring Principle: Tribe - Electric charge transfer
• Measuring Range: Dust content
• Remark: Other measuring range on request
• Process temperature: -25 to 400 Deg.C,maximum temp depends on Type
• Process gas humidity: Non-condensing
• Duct Diameter: >0.25m
• Ambient temperature: -15 to 50 Deg.C
• Ambient Humidity: 0...95% relative
• Enclosure rating: IP-67
• Analogue output: 4-20mA, 750 ohms load impedance
• Power Supply: 24VDC
• Optional Interfaces: RS-232 or RS-485
• humidity: non condensing.

Omron Blood Pressure Monitor JPN-1 From Dr Sayani's       OVERVIEW Measurement:Oscillometric method Measurement Range:Pressure 0 to 299mmHgPulse 40 to 180 beats/min Accuracy:Pressure +- 3mmHgPulse +- 5% Display Reading Inflation:Fuzzy-logic controlled by electric pump Deflation:Automatic pressure release valve Pressure Detection:Capacitive pressure sensor Battery Life:Approx.1500 measurements, with new alkaline batteries    Blood Pressure Level Indicator  Detects irregular heartbeat  Body Movement Indicator  Memory for 60 sets of readings with date and time  Average of Last 3 Reading  Intellisense Technology  Made in Japan

• Battery: Lithium
• Dimension: 167*32*32mm
• Reading Distance: 3cm-5cm
• Weight: 300g
• Language: Support English & Spanish Software

Patient monitor that shall draw cardiograms, measures blood pressure (invasive or not-invasive type), respiration values, temperatures at two spots, oxygen saturation in arterial blood ( spo2 ), and pulse rate ( hr ) . May be used to monitor patients on the transportation by using batteries, and the measured information on patient's condition shall be displayed in wave forms along with numerical values. Displayscreen display : colour tft display , screen diagonal curves and measured values : not less than 25.00cm . Up to 6 curves as well as numerical fields brightness: can be manually adjusted sweep speed : shall adjuste to 6.25, 12.5, 25 and 50 mms display pixels: at least 1024x768 monitor interfaces r-sync: for defibrillator , each r-wave shall be clearly identified , staff call: remote alarm via alarm adapter rs-232: as computer interface mainsbattery operation mains operation: shall be via built-in power supply battery operation: via integrated battery or charging console . Battery operating time: approx. Up to 4 hrs at least power supply : 220 v ac ±10%, automatic change-over power failure buffer : for trend values, system expansion software updates via interfaces monitoring parameters shall include : ecg, resp, ibp, nibp, spo2, pulse rate , dual-temp s-t segment synchronized detection and analysis graphic and tabular trends of all parameters for at least 96 hours 20-mn minimum ecg real time waveform and parameters storage and review shall be able to be connected with a central monitor station

Indoor Air Quality Monitor

monitors, electric goods, Washing Machines, LCD, fridge

Battery Health Monitors, Electro Mechanical Locks, Blast Cleaning Machine

bp monitors, Face Mask, sanitizer dispenser, Shoe Covers, Surgeon Cap

Blood Pressure Monitor, Medical Equipment, Skin Care Products

cabinet monitor, Computer, USB, Speaker, Mobile phone, Keyboard

Second Monitor

monitor, Computer Hardware Parts, Computer Keyboard, Computer Mouse

monitor, Laptop, USB Flash Drives, Desktop, modem, RAM, Mother Boards

monitor, Computer Peripherals, Keyboard, Ups