Control Equipment Dealers in Hyderabad

We are reckoned as the prime Pollution Control Equipment Manufacturer, Exporter, and Supplier in India. Our Pollution Control Equipment is available in a wide range, which is high in demand in the global markets. The Pollution Control Equipment is designed as per the industrial standards, for ensuring higher level of pollution controlling. Our Pollution Control Equipment is available at the most competitive prices. We Offer : Dust Suppression SystemsDust Extraction SystemsMulti Cyclone SystemsBag Filter SystemsVentilation SystemsHumidification Systems

• Type: Control Modules
• Material: Stainless Steel
• Color: Grey
• Design: Customised
• Current: 100-200W
• Phase: Single Phase
• Corrosion Resistance: Yes
• Operating Temperature Range: -30 to +70 Celsius Degree
• Display Type: Digital

Eot crane control equipments for various Positioning requirements with Servo Motors, Gear box, VVVF Drives, HMI, PLC and with intrinsically safe controls.1.5Ton LINAC Head Positioning system with Servo Motors, Gear box, VVVF Drives, HMI, PLC and with intrinsically safe controls. This assembly was attached on 5T FLP EOT Crane.

The Station Master uses several Telephones for different communications for the purpose of smooth Train Traffic Movement in a Station. Practically, it becomes tedious to attend to the Telephones spread over the Station Master’s Table.The Station Master Control Console using Micro Controller, designed and developed by EPSILON enables easy and convenient operations by the Station Master / Assistant Station Master.This Unit enables communication in : A. 4 WIRE MODE (IRS:TC-60/2007)I Section ControllerII Traction Power ControllerIII Traction Loco ControllerIV Other Controllerby pressing the designated Push Button Switch out of the 4 Controllers. B. 2 WIRE MODE (IRS:TC-80/2000) OR (IRS:TC-79/2000)For Point to Point Communication between:(i) Station Master & Assistant Station Master(ii) Station Master / Assistant Station Master and LC Gate(iii) Station Master / Assistant Station Master and Yard/ Maintenance etc.A 4 x 3 matrix keypad is provided for selecting the required Slave. C. AUTO MODEKeep the Push Button Switch provided on the Front Panel for selecting the BSNL or RLY. The Station Master also can talk to Auto Telephone Railway and DOT by pressing the Push Button marked RLY/DOT and provided on the Front Panel and by dialing the desired number.When a Call is received from any Auto Telephone, the respective LED shall glow. The Station Master can press the respective Push Button Switch and attend the Call.The Unit shall consists of the following :1. One Handset with Press to Talk (PTT) Switch to be used only in 4 Wire Mode, kept on the left hand side of the unit. Another Handset for use with 2 Wire Intercom or Auto Telephones kept on the right hand side of the unit.2. Cradle Switches.3. 4 Nos. of Push Button Keys for Communication between Station Master and Controllers marked CONTROL I to CONTROL IV with LED indication provided beside.4. 5 Nos. of DC Buzzers and 2 Nos. of AC Ringers.5. Keypad (3 x 4 matrix) for the Selective Calling Telephone and Auto Telephone.6. A Push Button Switch to select 2 Wire Intercom or Auto Telephone.7. Two Push Button Switches for connecting to Auto Telephone. Two LEDs by the side of this Switch indicates connection to Auto Telephone.8. A Push Button Switch to select up or down.9. A Ringer Circuit with Ringer for ringing in case the Station Master is called on the Auto Telephone. OPERATION :4 WIRE MODE :The Station Master can call any of the 4 Controllers by pressing the assigned Push Button (Enabling) and by pressing the Press to Talk Switch in the handset, the Station Master can converse with the called Controller. After conversation, he can press the same Push Button Switch again to disconnect (Disabling). Similarly when a Controller calls the Station Master, the designated LED shall flash and the Buzzer shall hoot. The Station Master has to press the called Push Button Switch to receive the Call, the Buzzer shall stop, LED shall change from flash to steady. Press the Press to Talk Switch and the conversation shall be through.At a time only one Controller can talk to the Station Master.When another Controller calls the Station Master, when the Station Master is already in conversation with the first Controller, the Caller’s LED shall flash and the buzzer shall hoot. The Calling Controller shall get the ring back tone. In case the Station Master feels that the call of the Second Controller is important, he should press the Push Button of the first Caller to disable and then press the Calling Controller’s Push Button Switch for communication. After the conversation the same Push Button shall be pressed again for disabling. Similarly the Station Master can have communication with any of the 4 Controllers, using only one Telephone Handset.The 6 Wires coming from the 4 Nos. of 4 Wire Decoders are terminated inside the Unit as per the Standard Wiring for Cradle Switch /+12, -12V / MIC / REC / BUZ / PTT / LED.Thus this Unit replaces 4 Control Telephones as per IRS:TC-38/97.2 WIRE MODE : Press the Push Button Switch to 2 WIREThe functions are same as Desk Type 2 Wire / 12 Way Selective Calling Telephone as per IRS:TC-80/2000 or Electronic Magneto Telephone as per IRS:TC-79/2000. In this case the Press to Talk Switch need not be pressed for talking. However after conversation the Handset should be kept on the ‘Cradle to disconnect or press the Cradle Switch manually to disconnect’. The LED provided and a Buzzer shall be activated when any of the Slave Telephone calls the Station Master. Press * for Selective Calling or Press # for Magneto. AUTO MODE :Whether the Push Button Switch is in AUTO Mode and when the Push Button Switch marked RLY or DOT is pressed, the Station Master gets connected to the respective Auto Telephone. AC Ringer and an LED provided in the Unit shall ring and the LED shall glow whenever there is a Call from the Auto Telephone. To attend the Call, the Station Master has to press the Push Button Switch marked ‘AUTO’. After the conversation, the Station Master has to press the Push Button Switch again to normal position. In case the Station Master wants to call any Auto Telephones, he has to press the Push Button Switch marked RLY or DOT and dial the desired number using the Keypad Switch. He can set the Push Button Switch to 2 Wire or Auto Mode as per the requirement.FOR BETTER CONVENIENCE OF OPERATION, OUR FINAL DESIGN IS IN 2 PARTS FOR 4 WIRE AND 2 WIRE AND AUTO MODES.D. DIGITAL CLOCK - 6 Digit LED Type RTC/GPS Based.This shall indicate the time based on Real Time or GPS.The Station Master Control Console works on 12VDC and the maximum current consumption shall be 600m Amps.As per latest version, the 2 WIRE MODE is kept as a separate unit with UP and DOWN Calling Indication.

• Type: Electrical Alternator
• Material: Copper
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Rated Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 1year, 2years

We are the main supplier of this product.

Shanti Air Handling (AH) Division was established in 2006 to serve the needs of industries requiring Air Pollution Control System. We manufacture  Pollution Control Equipment’s ,  right from Single cyclone dust collection systems, Multi Cone Cyclone Dust Collectors , Pulse Jet Bag filter, Reverse Air Bag House, Wet Settling Chambers, Wet Scrubber .We intend to be ” One Stop Shop ” our client’s requirements right from Boilers to balance of plants including pollution control equipment, which in today’s scenario is become utmost importance. Types of Pollution Control Equipment: • Pulse Jet bag Filters • Multi Cone Dust Collectors • Wet Scrubbers Pulse Jet Bag Filter Shanti pulse jet bag filters are one of the most efficient and cost effective solution for pollution control emmiting of Boilers . Its a online pulse jet bag filter, where the dust /ash from the industrial boilers gets trapped in specially installed high temperature bags through which flue gas is allowed to pass. Such dust and ash is cleaned row by row and this sequence is controlled through a controller. The dust particulars are deposited at the outer surface of the bag and are removed in a pre-timed cycle by a pulse jet of high pressure air sourced from an air compressor. This highly advanced process streamlines the dust particulars into the RAV with the help of hopper and ensures that only clean air moves out from the center of the bag & escapes out of flue gas outlet. Our bag filters are designed with optimal air to cloth ratio ensuring efficient performance. Shanti uses superior raw materials like high temperature fiber glass bags for reliability and durability. Single Cyclone Dust Collectors Shanti Single Cyclone Dust Collectors are designed on Vertex separation science . The dust collectors are designed so to provide cyclonic and rotation effect to separate dense particulate matter in the flue gases . A high circulating air flow is allowed to travel in a helical pattern from the top of the dust collector . This creates higher inertia and follow tight curve this ideal rotation effect will force the dense particulate mater to settle at the bottom of the cone , which in turn is removed manually or mechanically. Single Cone dust collectors are more suitable for biomass fuels like Wood , Briquettes only.  

• Features: Ergonomically optimized layout and TFT LCD display

Medha supplies driver consoles in ready to install condition with tft lcd displays, master controller, brake controller, electrical switches, gauges, lamp indications and other required components and sub-assemblies. Modular panels are used for easy change smodifications including provisions for future additions.

We offer an extensive range of MCC Panel (Motor Control Center) that is a device used to control and actualize the performance of an electric motor. These MCC Panels are offered in a wide variety such as compartmentalized with ACB/ MCCB SFU, DOL, ATS or Star Delta Starters. This range of MCC Panels can be fully drawn out with incoming and outgoing feeders or non draw out type. The MCC Panels are extensively used for reducing start voltage, reversing control or varying the speed as per requirement and for protection against overloads and faults. We offer a broad scope of MCC Panel (Motor Control Center) that is a gadget used to control and realize the execution of an electric engine. These MCC Panels are offered in a wide assortment, for example, compartmentalized with ACB/MCCB SFU, DOL, ATS or Star Delta Starters. This scope of MCC Panels can be completely drawn out with approaching and active feeders or non draw out sort. The MCC Panels are broadly utilized for decreasing begin voltage, switching control or shifting the speed according to prerequisite and for insurance against over-burdens and blames. Salient Features: Control center can be single or double front operated Floor mounted design Automatic/ manual means of starting and stopping the motor Fully drawn out with incoming and outgoing feeders or non draw out type Applications Chemical Industry, Heavy Metal, Food Processing Industry, Petrochemical Industry, Iron & Steel, Pump Houses, Pharmaceuticals Industry, Water Treatment, Refineries, Oil Mills, Textile Industry, Sewage Plants

Medha supplies driver consoles in ready to install condition with TFT LCD displays, master controller, brake controller, electrical switches, gauges, lamp indications and other required components and sub-assemblies. Modular panels are used for easy changes/modifications including provisions for future additions.Depending on requirement, consoles are made from MS (mild steel), FRP (fibre reinforced plastic) or using polyester/phenolic resins to comply with fire standards for flammability, smoke and toxicity. Features Ergonomically optimized layout Improved functional segregation TFT LCD display Harmonized Driver Machine interface Standardized displays, independent of application Attractive exterior designs Standardized solutions Cost competitive Optimum utilization of cabin space Human safety and comfort considerations Scalable for installation of additional sub-systems in future for ‘New Driver Cabs’ or ‘Modernization of Old Vehicles’, driver consoles are designed to suit the vehicle design and to improve the driver's safety, comfort and effectiveness.  

environmental equipment

power cum motor control center, Automatic Power Factor Control Panels

high access control equipment, Door Type Metal Detector, fixed bollards

environmental testing equipments, electro dynamic vibration simulation systems

Control modules, CCTV Camera, Computers, Power Amplifiers, CCTV System

pest control equipments

power control console, horse shoe, Resternotomy Saw Electrical, Eye Pad

lab quality control equipments, Lab Chemicals, Pharmaceutical Chemicals

air pollution control equipments, Incinerators, Medical Waste Incinerators

process control equipments, Electronic Instruments, Transmitter