Conveyor Feeder Dealers in Hyderabad

Material is extracted in batches from a silo and then fed into a weigh hopper. Feed rates of smaller screws are more accurate than those achieved with larger diameters. Consistently, larger Screw Feeders require micro-feed aids in order to improve their poor feeding accuracy.

Powerful chain conveyor & drive. Robust drum type crusher roll design for efficient breaking. Overload protection, with soft starter. Centralised lube system or auto lube system. CustomizedOptional equipment for Rock breakers and other configurations of hopper capacity & discharge variations.

Loss in Weigh Feeders are designed for accurately blending of fine powder solids. The system consists of a high precision bin weighing with a variable speed screw feeder attached to it. The in-fill is controlled through a pneumatically electrically operated gate. The rate of change in weight is measured and the screw speed is controlled to match the process requirement by using an advanced PID algorithm. Cumulative value of material discharged is provided along with flow rate retransmission. Optionally, digital communication feature is available for third party interface. Features: System accuracy of +0.5% or better of Full Scale. Multiload cell weighing mechanism for higher consistency and accuracy. Controller with Isolated Modules for added safety. Modular construction for future expandability of features. Monitoring of I/O signals and sensor. status through Controller in electrical engineering values. OIML approved and IP-68 Protected Load cells with Stainless Steel construction. Highly precise non-contact type optical encoder with IP 68 protection. VWF Drive with sensorless vector control and IP-20 Protection.

• Width: 400mm
• Length: 45 Meter
• Material: Carbon Steel
• Phase: 3Phase
• Automation Grade: Semi-Automatic

• Features: Rust proof, Rugged design, Excellent durability

We are regarded as one of the illustrious Belt Feeder Exporters and Suppliers from India. We offer world renewed technology based Belt Weigh Feeder (BWF) mechanism with open and closed console based on the accuracy and material feed control requirement to measure the flow as well as control the material flow, requested by the process control team of production house. We know the importance of the raw material controlling and it�s feeding to the process house, so develop Belt Weigh Feeder to full fill customer choice. Our Industrial Weigh Belt Feeders are used in industries such as Thermal power plants, Fertilizers, Cement, Pulp & Paper, Steel, Sponge Iron, Food processing, Solvent Extraction, Pharmaceuticals, Mining, Animal feeding, Poultry feeding etc. We Know the Best, So Design � You Know the Better, So Select We develop the tailor made design to suite entire customer range from vast production areas. Should not effect to the bulk dead loads (tare weight). Should be able to work with minimal capacity sensors, so that we can take up the system with good resolution. e.g.: 100 t/h capacity sensor will be 50kg. Should not be any moving object with in the system mechanism. Avoided the feed back taken from the return belt (like general belt feeders), which may give falls feed back, due to spicks in the return movement path of the belt. Avoided intermediate signal conditioners and amplifiers between mechanism and computation & control device. Easy to install and commission the system (approximate time take to install the system will be 6 hours). Digital computation and control device will feed the sensor excitation voltages, with out any ripple or deviations so; life of the sensors will be well protected as well optimum result can be taken from the sensors. Entire programming through membrane keypad, no potentio metes or dip switches selection or any other manual operation. We develop the computation and control device with 24 bit �System on Chip� technology with resolution of 16,000,000 counts. Say good bye to multi card system, all operations performs with single and compact design with 24 bit �System on Chip� technology computation and control device. We proudly announcing the accuracy level start from, better than + /- 0.1% for design capacities. System having self maintainable features means system operating with self supervisory software. Our computation and control device can communicate any of external device like PLC, DCS or Host Computer by mean of 4 / 20 mA, STATUS RELAY OUT PUTS, RS485, RS232, PROFIBUS AND DEVICE NET Available Capacities: 100 Kg/Hr to 500 T/H, belt width 150 mm to 1500 Application Area : Thermal power plants, Fertilizers, Cement, Pulp & Paper, Steel, Sponge Iron, Food processing, Solvent Extraction, Pharmaceuticals, Mining, Animal feeding, Poultry feeding etc.

Material is extracted in batches from a silo and then fed into a weigh hopper. Feed rates of smaller screws are more accurate than those achieved with larger diameters.   Consistently, larger Screw Feeders require micro-feed aids in order to improve their poor feeding accuracy.

TTFM-XLC extra low capacity Weighfeeders for Food, Pharma and Petrochemical applications. Feeders of Sanitary grade are also available with US FDA approved belts. Capacities 25 Kgs to 100 Kgs/Hour.

belt weigh feeder, Paddle Wheel Aerator, Bag Filling Machine

belt weigh feeders, auto bag filling system, check weighing system

volumetric feeders, Bin Activators, Auto Back Wash Type Filter

Bucket Elevators, screw coolers, Rotary Table Feeders, Rotary Feeders

Coal Feeder

Twin Screw Feeders, Process Equipment