Cylinder Pipe Dealers in Hyderabad

The Pipe It is essentially a thin steel pipe cylinder; welded with thicker steel joint rings at the ends, hydraulically tested and centrifugally lined with cement mortar. The M.S bar / wire is helically wrapped on the cylinder with controlled tension ensuring intimate contact with cylinder and is then coated with cement mortar by high impaction process. This results in several performance advantages over conventional mortar gunited steel pipes and other metal pipes. Choice of Joints The joint rings are made of thicker steel plates. The field joint can be over lapping /sliding, butt welded or with confined rubber rings to suit requirement of the client. A joint is so designed that it will be water tight under all service conditions. Optimum Design The pipe is designed to resist internal hydrostatic pressure by steel cylinder and pre-tensioned helically wound rod. Hence, pipe can be custom designed by selecting steel-cylinder thickness, bar diameter and spacing .This flexibility in design can result in substantial saving. Structural Integrity Since rods are helically wrapped under tension , the structural integrity of these pipes is greatly enhanced because of the interlocking of steel elements of the pipe. This composite construction greatly increases rigidly of the pipe, beam strength and resistance to impact. Corrosion Resistance The cement mortar encasement maintains the steel elements in a highly alkaline environment (pH of 12.5 or greater) in which galvanic corrosion is permanently inhibited. Although, rarely required, supplemented protection can be provided for any unusual surrounding conditions. Stiffness Stiffness of pipe is the result of the keying action of the pre-tensioned rod wrap over steel cylinder and the coating. From the graph of pipe stiffness Vs. Diameter Vs. types of pipes, it is observed that these pipes are many times stiffer than steel pipes lined and coated with cement mortar, PVC & Ductile Iron Pipes. hence, less expensive bedding and side support during installation. This will result in added economy. Coefficient of Roughness The smooth surface of cement mortar lining provides value of Hazan Williams constant 'C' around 140 in the formula. Because cement mortar prevents corrosion of steel pipe, the water carrying capacity is not decreased with age of pipe. Diameter, Pressure & Length These pipes can be made from 250 mm to 1600 mm diameters for working pressure up to 25 Kg/cm2 . Length of each pipe shall be between 5 - 6 meter. Longer length pipes are also possible for large requirements.  

bwsc pipes, psc pipes