DERAZ ENGINEERS Nacharam, Hyderabad, Telangana

Our pioneering solutions achieve water management through water recycle and source reduction, and waste management though product recovery and waste minimization. There integrated systems use innovative energy-efficient, cost effective technologies for optimum water recovery. They include advance effluent treatment processes, micro filtration, ultra filtration, nano filtration and reverse osmosis systems, membrane bio-reactors and advanced photo-chemical oxidation. They conserve water through recycle of waste water and recover valuable products for resue, thus giving our customers a good return on investment while protecting the environment. They are designed for the recovery and reuse of water and products, such as: » Waste water from power plants, fertilizer, electronics, electroplating, textile, chemical and automobile industries.» Cooling tower blowdown» Metal working oils» Electrodeposition paint» Fibre and water in the pulp and paper industry

Intervalve check valve models IVC and IVCT are primarily single plate swing check valve with a short pattern wafer body conforming to the API 6D and ANSI B16.10 face to face dimensions. The valve has a simple but robust construction with reliability. The low inertia disc design enables the valve to open or close with a very low differential pressure which make them ideal for services operating under low differential pressures. The pressure drop across the valve in fully open condition is relatively low and makes them ideal for pump discharge duties. The eccentric disc shaft in combination with the disc seat guarantees a positive shut off of the returning media. The short face to face dimensions and low weight allows a simple space saving installation between the mating companion flanges. The valves are suitable for mounting between weld neck or slip on type companion flanges of different standards. The need for flange gaskets during installation is totally eliminated in the case of IVC model due to the in-built face sealing 'O' rings provided on the sealing face. Gaskets are recommended while installing IVCT model valves.

Submersible pump in multi-stage construction with radial or mixed flow impellers coupled with oil or water filled, single/three phase submersible motors. Pumps with SS jacket are also available up to 100 mm diameter. Suitable for horticulture, irrigation, housing, building services and farm houses, ornamental fountains etc.

A real workhorse from the IV stables, IVGK model Butterfly valve incorporates the optimum design features to provide long trouble free service in the field. This general purpose soft seated Butterfly valve has a fully rubber lined single piece body with centric disc construction and is available in wafer type body pattern.

Power Source : Electric DC

Metering accuracy is almost independent of back pressure Flow rate is linear to stroke length variations Multiple head plunger pumps with common drive for mixing two or more liquids in a desired ratio. The ratio can be easily set Jacketed Liquid heads can be heated by hot water/steam. Ability to transfer & dose products which are highly viscous at room temperature. External arrangement for flushing the gland packing to increase its life is also possible MODEL: PL 1011, PL 2017, PL3530, PL 6040 CAPACITY : Minimum - 0-0.7 LPH, Maximum - 0-10,000 LPH Pressure MAXIMUM : upto 400 kg/cm2 MATERIAL OF CONSTRUCTION : AISI 304, AISI 316, Hastalloy B, Alloy 20, HASTALLOYC ETC DUTIES : Water treatment chemicals, boiler chem., molten sulphlur etc.

Type : Oil Free Compressors

Material : Aluminium, Carbon Steel, Cast Iron, Matel, Steel

Application : Cooling Elements

Weight : 0-25Kg, 100-125Kg, 125-150Kg, 25-50Kg, 50-75Kg, 75-100Kg

Color : Black, Blue, Dark Grey, Grey, Metallic, Silver

Voltage : 110V, 220V, 380V, 440V, 525V

Condition : New, Old

Frequency : 50Hz, 60Hz

Automatic Grade : Manual, Semi Automatic

Power Source : Electric

Pressure : High Pressure, Medium Pressure

Motor Power : 0-3Hp, 12-16Hp, 3-6Hp, 6-9Hp, 9-12Hp

Feature : Auto Controller, Durable, High Performance, Low Maintenance, Sensor Controlled, Stable Performance

Warranty : 1Year, 2Years

Configuration : Air Compressor

Flow Rating : 0-100Cfm, 100-500Cfm, 1000-1500Cfm, 1500-2000Cfm, 500-1000Cfm

SALIENT FEATURES OF THE SIEMENS MOTORS High Pressure Aluminium Die-cast Rotors all the way up to 400 Frame: • Enhanced Starting Performance • Enhanced reliability due to robust construction as compared to the brazed copper rotors. SALIENT FEATURES OF THE SIEMENS MOTORS Original design of Side mounted Terminal Box: • Conversion from Left to Right & Right to Left possible at site • Conversion without rotor removal means quicker and safer interchange

Parallel shaft geared motors are the modern version of coaxial geared motors. As a result of their compact and short design, they take up less space than helical geared motors. Parallel shaft geared motors can either have a solid shaft - or alternatively a hollow shaft as so-called plug-on gear unit.

Helical worm geared motors are the favorably-priced solution for drives with angular geared motors. The efficiency is significantly better than that of pure worm geared motors due to the implementation as helical-worm geared motors.

Helical geared motors are the conventional solution for your drive application. Helical gear units are coaxial units where the gear unit output shaft is in-line with the motor shaft. A solid shaft is always used as output shaft.

Helical bevel geared motors are angular geared motors where the gear unit output shaft is rotated through 90° to the motor shaft. Helical bevel geared units can either have a solid or a hollow shaft.

Advanced membrane separation processes include systems based on micro filtration, ultra filtration, nano filtration and reverse osmosis for sea water and brackish water desalination, industrial process water treatment and waste water recycle. Using a combination of membrane process and / or electrodeionisation, we offer ultrapure water systems to produce 10-18 Meg.ohm cm specific resistance water, catering to the needs of the pharmaceutical, electronics and semi-conductor industries.

Lined butterfly valve are designed to meet the demanding requirements of the general utility valve market with the HVAC segment in particular. IVGKL is a truly fit & forget valve, which requires minimal maintenance. The body liner which also functions as the soft seat, comes in an integrally molded (bonded) version and offers 100% bi-directional sealing against vacuum to rated pressures of PN10.The wafer style body has universal design to fit between pipe flanges of almost all popular flange standards.

Water Pressure Boosting Systems Fully automatic pressure boosting units available in three variants - K, V & VP with 2 to 6 vertical high-pressure pumps and fully electronic control of the required supply pressure with two standard volt-free contacts for fault indication. Suitable for residential Buildings, hospitals, office buildings, hotels, departmental stores and other applications.

Forged globe valve to BS 5352/ISO 15761 (#800/1500), ASME B 16.34 (#2500), bolted bonnet for #800, welded bonnet for #1500/2500, socket weld ends for # 800-2500, socket / thread ends for #800, integral back seat, outside screw and yoke and rotating stem.

Forged gate valve to API 602 (#800/1500), bolted bonnet for #800, welded bonnet for #1500, socket weld ends for #800 - 1500, socket / thread ends for #800, solid wedge, integral back seat and nonrotating stem.

CG has the largest manufacturing range of low voltage motors suitable for hazardous area. These motors are designed to suit the ignitable atmospheres present in hazardous locations such as Zone1, Zone 2 or Class1 Div 1 and 2. Motors are suitable for various temperature classes & gas groups. CG manufactures Ex'e' , Ex'nA' & Ex'd' enclosure motors. The motors are licensed by BASEEFA for ATEX, CSA for IEC and Ex Div 2 and DGMS / CCO for complete range of low voltage hazardous motors.

CG is an established name synonymous with rotating machines. Today, we are in a position to offer an ENTIRE RANGE of world Class DC Motors. We offer laminated Yoke DC Motors in IEC frame up to 710, for various applications for constant and variable speed requirements. Applications: Plastic extruders, Printing machines, Steel Rolling Mills, Wire Rod Mills, Apron Feeder, etc.

A real workhorse from the IV stables, IVGK model Butterfly valve incorporates the optimum design features to provide long trouble free service in the field. This general purpose soft seated Butterfly valve has a fully rubber lined single piece body with centric disc construction and is available in wafer type body pattern.

Forged check valve to BS 5352/ISO 15761(#800/1500), ASME B 16.34 (#2500), bolted cover for #800, welded cover for #1500/2500, socket weld ends for #800- 2500, socket / thread ends for #800, spring loaded disc.

Horizontal, end suction, centrifugal, radially split volute casing pump in backpull-out design fitted with single stage radial impeller. Suitable for handling clear liquids in applications for water supply, irrigation, air-conditioning, fire fighting, auxiliary process in paper, cellulose, sugar, food and textile industries.

Type : Centrifugal Pumps

Usage : Water

Weight : 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg

Color : Brown, Grey, Light White, White

Voltage : 110V, 220V, 380V, 440V

Condition : New, Used

Operating Type : Manual, Semi Automatic

Power : 1-3kw, 3-6kw, 6-9kw, 9-12kw

Driven Type : Electric

Warranty : 1year, 2years

Intervalve's GKL series valves are designed to meet the demanding requirements of the general utility valve market with the HVAC segment in particular. IVGKL is a truly fit & forget valve, which requires minimal maintenance. The body liner which also functions as the soft seat, comes in an integrally molded (bonded) version and offers 100% bi-directional sealing against vacuum to rated pressures of PN10.The wafer style body has universal design to fit between pipe flanges of almost all popular flange standards.