Detective Device Dealers in Gayatri Nagar, Hyderabad

The GasCheck G gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables improved sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels. Designed for the search and location of gas leaks, the GasCheck G leak detector provides you with effective detection of almost any gas or gas mixture. Robust and reliable, the GasCheck G leak detector gives stable, repeatable readings of the detected gas. The instrument’s LCD display, LED indicator and audible sounder clearly indicate the leak present. The GasCheck G leak detector automatically zeros to the ambient air around it when switched on and is ready to detect immediately. The instrument’s easy to use graphical interface and intuitive keypad allows for simple function, selection and adjustment. Upgradeable throughout the range, the GasCheck G gas leak detector is available in three distinct versions; G1, G2 and G3 with varied capabilities. Features can be easily added to upgrade the instrument without it having to be returned to the factory.   Micro Thermal Conductivity Sensor for enhanced sensitivity Three variants available; G1, G2, G3 Choice of reading in cc/sec, mg/m³ or ppm Graphical icon display menu for international markets Rapidly detects almost any known gas or gas mixture – particularly sensitive to ammonia, argon, butane, helium, hydrogen, SF6 Reliable, stable and repeatable readings Conveniently calibrated against helium LCD back lit display Hand held and robust

Intelligent key management with compulsory alcohol testing – this system will not allow vehicle keys, or keys to access hazardous equipment, to be released until the user has passed an alcohol breath test. Can be integrated with series of Traka Key Management Systems. Provides extra access protection from non-alcoholics access the Keys. The alcohol fail level can be set to pre-determined levels such as Zero Tolerance.

We are offering okm future i-160 metal detector. He future i-160 is a professional measuring instrument with a very high resolution antenna of 50 cm width. Compared to the future 2005 with its 100 cm antenna the future i-160 has a four times higher density of measured data. Compared to the earth imager with its 16x lower resolution the device is most suitable for the professional archeological and industrial use. This fact is reflected also in the graphical representation inside the 3d-software. detailed graphics are the basis for an exact determination of the size and depth of objects. Because of the compact form of the antenna the device is not only usable for the measurement in even ground conditions. Besides the usual graphical representation the device provides two more particularities. On the one hand it makes buried object immediately visible with the horizontal live picture and on the other hand a typified ultrasound scan can be created with the vertical antenna. the device includes the following functionality: acoustical magnetometer high resolution ground scans in 3d live picture with horizontal ground scan antenna live picture with vertical pin pointing antenna graphical analysis on a computer

This project is aimed to build a prototype of human detection robot, which uses a PIR sensor to detect if any human being is present in its vicinity and wireless communications GSM and GPS A GSM modem provides the communication interface. It transports device protocols transparently over the network through a serial interface. A GSM modem is a wireless modem that works with a GSM wireless network. This GSM Modem can accept any GSM network operator SIM card and act just like a mobile phone with its own unique phone number. Advantage of using this modem will be that you can use its RS232 port to communicate and develop embedded applications. Applications like SMS Control, data transfer, remote control and logging can be developed easily. The modem can either be connected to PC serial port directly or to any microcontroller. Global Positioning System (GPS) satellites broadcast signals from space that GPS receivers, use to provide three-dimensional location (latitude, longitude, and altitude) plus precise time. GPS receivers provides reliable positioning, navigation, and timing services to worldwide users on a continuous basis in all weather, day and night, anywhere on or near the Earth. This ultra-sensitive GPS receiver can acquire GPS signals from 65 channels of satellites and output position data with high accuracy in extremely challenging environments and under poor signal conditions due to its active antenna and high sensitivity. The GPS receiver’s -160dBm tracking sensitivity allows continuous position coverage in nearly all application environments. The output is serial data of 9600 baud rate which is standard NMEA 0183 v3.0 protocol offering industry standard data messages and a command set for easy interface to mapping software and embedded devices. This project is built around 8051 micro controller, which employs a PIR sensor to sense presence of any moving objects, which we refer here to be a human. The sensor information is fed to the controller. Inside the controller we embedded a code which checks the status of the sensor. When a signal corresponding to the human presence is detected, it takes the coordinates from the GPS modem and sends the information about the location and the live human status to a mobile phone number, through GSM modem. Our project finds its application in rescue operations at the times of natural calamities like earth quakes and tsunamis, to search for the live human beings from the carcases and debris spread irregularly, where there may not be a possibility for rescue team to creep in. This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.   Micro Controller : AT89S52 Crystal : 11.0592 MHz Lcd : HD44780 Pir Sensor Gsm Modem Gps Modem Software Requirements Keil Proteus Uc Flash Embedded C Prog Isp

Applications The GasCheck G gas leak detector detects gases across a wide range of industries and applications, including: Industrial Refrigeration Manufacturing Quality Assurance Laboratory Medical Research Aircraft / wing tank entry Automotive Manufacture Fugitive Emissions Gas Line Leakage GIS Leakage Sileage silos Solvents in Clean Rooms Description GasCheck G - Gas Leak Detector for Rapid, Accurate Gas Leak Measurement:   The GasCheck G gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables improved sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels.   Designed for the search and location of gas leaks, the GasCheck G leak detector provides you with effective detection of almost any gas or gas mixture. Robust and reliable, the GasCheck G leak detector gives stable, repeatable readings of the detected gas. The instrument’s LCD display, LED indicator and audible sounder clearly indicate the leak present.   The GasCheck G leak detector automatically zeros to the ambient air around it when switched on and is ready to detect immediately. The instrument’s easy to use graphical interface and intuitive keypad allows for simple function, selection and adjustment.   Upgradeable throughout the range, the GasCheck G gas leak detector is available in three distinct versions; G1, G2 and G3 with varied capabilities. Features can be easily added to upgrade the instrument without it having to be returned to the factory.   Features Micro Thermal Conductivity Sensor for enhanced sensitivity Three variants available; G1, G2, G3 Choice of reading in cc/sec, mg/m³ or ppm Graphical icon display menu for international markets Rapidly detects almost any known gas or gas mixture – particularly sensitive to ammonia, argon, butane, helium,         hydrogen, SF6 Reliable, stable and repeatable readings Conveniently calibrated against helium LCD back lit display Hand held and robust

Metal Detectors, Attendance System, bio metric system, CCTV Cameras

Heat Detector, wireless phones, Biometric Reader, fire smoke detector

access control, sensor, Gps Modem, Fire Extinguisher

Access Control Systems, Alarm Systems, Cameras, cctv, Security Systems

Biometric System, CCTV Camera, Security Equipment

Smoke Detectors, Access Control System, Burglar Alarms, CCTV Camera

Jaundice Detector, Reusable Pulse Oximeter Sensor

Smoke Detectors, Ups, Fire Alarms

gas leak detectors, Combustion Analyzer

Smoke Detectors, Fire Extinguishers, Fire Fighting Equipments