Drill Rods Dealers in Hyderabad

Drill Collars (Slick and Spiral) are processed from AISI 4145 H Chromium Molybdenum Alloy Steel and are fully heat treated to a Brinell Hardness range of 285-341 BHN and have a minimum Charpy V-notch Impact strength of 40 ft-lbs. at 70° F and a minimum elongation of 13%. The mechanical properties meet or exceed API 7-1 requirements. The physical properties are guaranteed one inch below the surface at ambient room temperature. Mechanical Properties (4145 H Chromium Molybdenum Alloy Steel) Drill Collar OD (in.)Minimum Yield Strength (psi)Minimum Tensile Strength (psi)Minimum Hardness(BHN) 3 1/8 to 6 7/8 110,000 140,000 285 7 to 11 100,000 135,000 285 Drill Collars are precision trepanned to close bore tolerance and all bores are drifted to API 7-1. The connections are cut on CNC Machines. All API connections comply with dimensional requirements specified in API 7-1 and guidelines presented in API RP 7G. Spiral Drill Collars:To avoid differential pressure sticking in the hole, the surface of drill collars can be provided with three spiral grooves reducing the contact area with the wall of the hole. The spiral grooves let mud circulate freely around the Drill Collar to equalize pressure and prevent a seal from forming. Loss of weight is approximately 4%, compared to Slick Drill Collars. API Stress Relief Features and API Bore Back Box decrease the frequency of fatigue failures by improving the bending strength of pin and box connections, thereby, reducing high stress concentrations. Stress relief features are machined in compliance with API 7-1. Connections NC23, NC 26 (2 3/8 IF) and NC 31 (2 7/8 IF) do not have sufficient metal to accommodate stress relief features. Slip and Elevator recesses improve handling efficiency and safety. The upper radius of the elevator recess is cold-rolled. Slip and Elevator recesses can be used together or separately. Slip and Elevator Recesses are machined in compliance with API RP 7G guidelines. On enquiries and orders, please specify:Outside Diameter, Bore, Length, Connection Size and Type, API Stress Relief Features on Pin and Box ends, Slick or Spiral, Hard banding (band location and width), Slip or Elevator Recesses, Pressed or Cast Steel Thread Protectors, and any special features. Quality Control:Drill Collars are inspected to comply with API standards. The inspections include visual dimensional checks as well as Ultrasonic Inspection on each bar over its full length and section. Thread Profile, Lead, Taper, Pitch and Gage Standoff are 100% inspected on each Drill Collar to all applicable API Specifications and recorded.

• Material: Metal
• Length: 20’ & 30’
• Finishing: Polished
• Feature: Excellent Quality, High Strength
• Material: Stainless Steel
• Brand Name: PRL
• Length: 4572mm
• Color: All
• Usage/Application: water well
• Model Name/Number: Drill Rods
• Drilling Rig Type: Land Based Drilling Rigs
• Capacity: 15 FT
• Control Type: Pneumatic type
• Size: 10 inch
• Hole Diameter: 18"

• Material: PVC
• Working Pressure: 4 Kg/sqcm
• Color: Gray
• Thickness: 2mm
• Pipe Joint type: Sol fit
• Size/Diameter: 1.5 inch
• Usage/Application: Agricultural
• Pipe Class: Schedule 40
• SDR: 13.5
• Type: Hard Tube

• Material: Solid Carbide
• Length: >300 mm
• Type: Straight Shank
• Drilling Rig Type: Land Based Drilling Rigs
• Brand: Getech
• Usage/Application: Mining

• Feature: Crack proof, Easy to fit, Excellent quality

• Brand Name: KLR
• Finishing: Polished
• Shape: Round
• Certification: ISI Certified
• Feature: Corrosion Proof, Excellent Quality
• Type: Drill Rods
• Country of Origin: India
• Available Sizes: 3”, 3 1/2”, 4 1/2”, 5 1/2”
• Available Length: 5′, 10′, 15′, 20′, 30′

Advatages Increase the Life of the drill rods by 100% than normal drill rods Reduce one side rubbing, Hole deviation and leakage at joints No Weld layer will be visible and there fore less tolerance in the rod guide Traction force and strength will be increased by 40%

• Brand Name: MMR Mining Equipments
• Features: Reliable performance, Sturdy construction, Longer service life
• Usage/Application: Drilling purpose

• Type: Drill Rods
• Material: Alloy Steel, Aluminium, Austenitic Steel, Carbon Steel, Iron, Mild Steel, Stainless Steel, Steel
• Shape: Round
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm
• Application: Construction, Manufacturing Unit, Marine Applications, Water Treatment Plant
• Color: Black, Brown, Grey, Silver
• Finishing: Non Poilshed, Polished
• Dimension: 10-100mm, 100-200mm
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, High Strength, Perfect Shape

We are the main supplier of this product.

• Type: Drill Pipe
• Material: Alloy Steel, Aluminium, Brass, Carbon Steel, Copper, Nickel Steel, Stainless Steel
• Shape: Rectangular, Round, Square
• Thickness: 10-20mm, 20-30mm, 30-40mm
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm
• Application: Construction, Manufacturing Unit, Water Treatment Plant
• Color: Black, Brown, Grey, Silver
• Feature: Corrosion Proof, Eco Friendly, Fine Finishing, High Strength, Highly Durable
• Warranty: 1Year

The most sustainable Drill Rods which gives very long life and KLR Drill Rods comes with ISO 9001: 2015 certification. Advantages:Increase in the Life of the Drill Rods by up to 100% more than any Normal Drill Rods. Reduces one side Rubbing, Hole Deviation and Leakage at Joints. No Welded Layers will be visible and hence there will be less tolerance in the Rod Guide Traction force and Strength will be increased by 40%.

• Application: well Drilling pipes for bits
• Certification: ISO
• Processing Type: Forging
• Machine Type: Drilling Equipment
• Supply Ability: 10 Piece/Pieces per Week
• Material: Carbide
• Packaging Details: Export Quality Sea Worthy Packing
• Place of Origin: Telangana, India
• Lead Time: 8-10 weeks from the date of receipt of confirmed order

• Material: Solid Carbide
• Length: 3-5 Feet
• Type: Straight Shank
• Nominal Size: 1 inch
• Size: 25-30 mm( Diameter)

Drill collars Drill Pipes Heavy Weight Drill Pipes Drill Collars, Casing Pipes (API & Premium Connections),Coupling, Pup-Joints & Cross Overs,Repair Reconditioning of Drill Pipes Premium Connections.

. We are a well-established as dth drill rods manufacturer, exporter and supplier in andhra pradesh, india. The dth drill rods that we bring forth are acclaimed for sturdy configuration resulting in durability. Dth drill rods can be obtained from us in varied sizes, as per requirement. highlights drill pipes heavy weight drill pipes drill collars production tubing (api & premium connections) casing pipes (api & premium connections) coupling, pup-joints & cross overs oil field accessories & services repair reconditioning of drill pipes premium connections field inspection services

• sizes: 3"/31/2"/41/2"/51/2"/8"

Increase in the life of Drill Rods by 90% than the normal Drill Rods,One side rubbing, hole deviation and leakage at joints will not occur,No weld layer will be visible and therefore less tolerance in the rod guide.

Drill pipe, Remembering the exact requests of customers, our Drill Pipes Manufacturers offer an extensive variety of Drill Pipes. These solely outlined gadgets are respected for their ideal quality, great and dimensional correctness. Drill Pipes Manufacturers additionally offer these gadgets in different specialized details and measurements according to the careful necessities of customers. Drill Pipes Manufacturers items are offered at extremely plausible costs.

To maintain optimum product environment, we use superior grade packaging material that is nontoxic. The labels on packs provide products details clearly and are smudge-proof. Our strong association with the renowned vendors in the market helps us in fetching the outstanding array of raw materials and that too after complete inspection. We keep our standards high to maintain quality throughout. These Drill Pipes have a smooth and polished surface which is available in different thicknesses.  

• Material: Mild Steel
• Length: 78m
• Type: Straight Shank
• Country of Origin: Made in India
• Usage/Application: Borewell
• Brand: BWD
• Diameter: 80mm

• Features: Anti-corrosive, High tensile strength, Dimensionally accuracy

• Warrenty: 1year
• Brand Name: Ind Tech
• Hole Diameter: 4 Inch
• Usage/Application: Water Drilling
• Material: MS
• Length: 15 ft

DTH Drilling Rods offered come in sturdy construction finish and find extensive use in areas like mining, quarrying and other processes. Made available at competitive prices, these DTH drill rods are developed using superior grade metal supports so as to ensure in them high working reliability. Further, the checks conducted at every level of operations also facilitate smooth and error free production. Some of it features include available in different size and thickness operations; allow for smooth boring support; durable construction finish for lasting service usage.

• Type: Straight Shank
• Length (mm): 30-60 mm
• Size: 8-10 mm

• Certification: ISO9001 2008
• Power(W): .
• Condition: New
• Voltage: .
• Dimension(L*W*H): .
• Weight: .
• Usage: Water Well
• Warranty: .
• Place of Origin: Andhra Pradesh, India
• Model Number: .

We are best offering External upset drill rods

To meet the challenge of productivity, KEM gives you high performance drill rods. Our modern plant, fully equipped with state-of-the-art technology, assures consistent quality product, meeting strigent specifications of customers.Uncompromising quality control, involvinf constant testing and validation right from raw material check to finish inspection, make our drill rods the right choice for Mining, Quarrying, Construction and Drilling activities. Our drill rods are manufactured from high quality imported alloy steel therby ensuring longest possible drilling life nder most arduous conditions.Our carbide inserts are endowed with three distinctive properties viz; Hardness, Toughness, Wear resistance. In addition, our inserts are meticulously brazed for strong joints. To ensure effective rust protection on the outside surface and the inside surface hole, our rods are given a special chemical treatment.

With sincerity and hard work, we have been to carve a niche for ourselves as one of the foremost organizations offering Drill Collars. We manufacture these drill collars gauges with the support of our experienced technology experts, by using ultrasonically tested bars of chrome molybdenum alloy steel. For the satisfaction of patrons, we provide these drill collars in all sizes and connections as per API std.

Increase in the life of Drill Rods by 90% than the normal Drill Rods One side rubbing, hole deviation and leakage at joints will not occur No weld layer will be visible and therefore less tolerance in the rod guide. Traction force and Strength will be increased by 40% Available sizes - 3"/31/2"/41/2"/51/2"/8"

• Type: Drill Rods
• Material: Alloy Steel, Aluminium, Austenitic Steel, Carbon Steel, Iron, Mild Steel, Stainless Steel
• Shape: Round
• Length: 1-1000mm, 1000-2000mm
• Application: Construction, Manufacturing Unit, Marine Applications, Water Treatment Plant
• Color: Black, Brown, Grey, Silver
• Finishing: Non Poilshed, Polished
• Dimension: 10-100mm, 100-200mm
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing, High Strength

DRILL RODS OF ALL API STANDARDS, Pneumatic Drilling Machine

integral drill steels, Tapered Drill Rod, Drill Rods, Drilling Equipment

Drill Pipes, bits, crawler mounted dth drilling rig