Dwyer Pressure Transmitters Dealers in Hyderabad

• Process-pressure: -1 - 420 bar
• Threaded-connection: ¼ - 18 NPT
• Flange-connection: ≥ 1⅜
• Ambient-temperature: -40 - 80 °C
• Smallest adjustable span: 0.25 mbar/25 Pa (0.036 psig)

This transmitter features in-field replaceable electronics module that thanks to the auto-configuration functionality dramatically improves plant productivity. Its intuitive plug-and-play display with easy setup procedure really helps users by saving time and lowering maintenance and inventory costs. Moreover, the innovative TTG (Through The Glass) technology allow users to configure the instruments in the field without removing the windowed front cover and consequently to save a lot of time setting all parameters by using the finger tips in few minutes.  In addition, 266DSH features Plugged Impulse Line Detection as standard helping customer in detecting when the impulse line are going to be plugged. This is real predictive maintenance. SIL2/SIL3 certification issued by TÜV Nord according to IEC 61508 represents another key-feature within 266 pressure transmitter portfolio. This certification is a real guarantee of protection and makes of 266DSH the smartest fit in Safety-critical loops. 266DSH features WirelessHART communication protocol allowing the addition of pressure measurement points throughout your operation. You can now monitor hard-to-reach locations and keep your employees out of dangerous and hazardous areas. The 266 WirelessHART Pressure Transmitters have a battery life of about 10 years at 32 sec update rates, delivering a very cost-effective and reliable solution to monitor your process assets. Shorten installation times by eliminating complex wired infrastructures, and lower overall implementation costs of process measurement, with ABB wireless devices featuring WirelessHART communications – Measurement made easy.   Data 266DSH: smartness beyond performances. - Base accuracy : from ±0.06%  - Span limits: 0.05 to 16000kPa; 0.2 ... 2320 psi - Multiple protocol availability – provides integration with HART®, PROFIBUS PA and FOUNDATION Fieldbus platforms offering interchangeability and transmitter upgrade capabilities  - Full compliance with PED Category III   

We supply quality range of Differential Pressure Transmitter which employs the latest technology to be at par with the latest requirement of the clients. The Differential Pressure Transmitter offered by us provides virtually the high level of performance and precision in the market. These are equipped with the turn system with wall-mount plate for quick and easy mounting. Specifications : Measuring ranges from 0/ 10000 Pa to -1000/ 2000 mbar (according to model, see Configuration Configurable intermediary and central zero ranges 0-10 V or 4-20 mA output, active sensor, power supply 24 Vac/Vdc (3-4 wires) or 4-20 mA output, passive loop, power supply 18 to 30 Vdc (2 wires) ABS IP 65 housing, with or without display

• Condition: New
• Base accuracy: From ±0.06%
• Packaging Type: Packed in corrugated boxes

Affordable price and high quality are the major attributes owing to which our Differential Pressure Transmitter is highly in demand amongst buyers. In order to produce quality products, we make use of superior grade raw materials. Our quality auditors strictly check the raw materials against varied quality parameters before procurement.Details : 266DSH smartness beyond performances. Base accuracy  from ±0.06% Span limits 0.05 to 16000kPa; 0.2 ... 2320 psi Multiple protocol availability – provides integration with HART®, PROFIBUS PA and Foundation Fieldbus platforms offering interchangeability and transmitter upgrade capabilities Full compliance with PED Category III

compact design 0.25% accuracy compact design led power indication 2 – wire design 4 – 20 ma output applications filter status duct static pressure clean room pressure building pressure fan blower pressure paint booths dust collectors glove box pressure bubbler systems laminar flow hoods cabinet purging.

he styrax “differential pressure transmitter” is specially designed to indicate the pressure difference between two different areas and transmits analog output for building automation and hvac industry. The large 4 digit, 0.56” 7 segment led display is easy to read, even from a distance. Alarm maximum, high and low, set limit can be configured, which can help the user to monitor the dp and to take necessary actions to maintain the room conditions as per the requirement or application. Differential pressure transmitter displays and data transfers to any master device on modbus rtu rs-485 communication. It has proximity keypad to program instrument by user. It has stainless steel modular face plate, which is designed as a mounting accessory for monitor suited for modular wall clean room applications where you need flush mounting mechanism.   specifications : input type: inbuilt piezo-resistive dp sensor. 4 digit, 0.56” bright led display for displaying differential pressure. output type: 4-20ma or 0-10vdc. measuring range: -105.4 to 105.4 mmwc, -1034 to 1034 pascal's and 8 types of units with equivalent values. accuracy: 1.5% of fsd. operating voltage: 24vdc. enclosure: ss304 faceplate with abs enclosure. features : advanced microcontroller based dp measurement and transmitter. software programmable channel ranges, units & resolution. process parameter status indication with leds. process value violations display indication. software programmable measurement range settings. high input impedance. software calibration – no trim pots. pc programmable. user selectable set limits for process value violation. inbuilt buzzer to audible process value violation. password protection for programming mode. software calibration

We are offering differential pressure transmitter type cp 100 measuring ranges from 0+100 pa to -1000+2000 mbar (according to model, see “configuration”) configurable intermediary and central zero ranges 0-10 v or 4-20 ma output, active sensor, power supply 24 vacvdc (3-4 wires) or 4-20 ma output, passive loop, power supply 18 to 30 vdc (2 wires) abs ip 65 housing, with or without display quick and easy mounting with the “¼ turn” system with wall-mount plate.

• Model: BT-DPT-II
• Output signal: 4 . .20 mA, 0 .. 5/10 Vdc
• Power supplier: 10 ... 28Vdc (Current Output), 15 .. 30 Vdc (Voltage Output)
• Material in contact: AISI3l6L
• Case: AISI304
• Process connection: G1l4”
• Overpressure: 100 bar,
• Protection: IP65
• Permitted temperature fluid: -20..+80°C
• Sensor class (included linearity and hysteresis): 0,25%fsd
• Sensor: Piezoresistive
• Range: minimum 40 mbar to maximum 20 bar