Environmental Sensors Dealers in Hyderabad

• Features: High Photo Sensitivity, Fast Response Time, Sensitivity can adjustable, Easy to use.
• Voltage: 3.3 V-5 V
• detection distance: 20 cm (4.8V)
• Model/Type: flame senor
• Weight G: 0.28g
• Dimensions: 1.18 in x 0.59 in x 0.20 in (3.0 cm x 1.5 cm x 0.5 cm)

We are suppliers of burners & boilers spares, monarch nozzle, danfoss nozzles,sequence controllers, suntec pumps, gear pumps, photocells, ignition transformers, flame sensor, duplex filters, ignition electrodes, temperature controllers, sensors, blower fans, burner motores, pressure switch thermic fluid pumps & its spares, blast tubes, boilers coils, solenoidcoils, heaters, level switch,& more.

JUMO ecoLine O-DO - Optical Sensor for Dissolved Oxygen (DO) serves in as an expansion to existing JUMO frameworks by giving the DO concent. It depends on the visual estimation system (radiance technique). The device is solid, made out of hardened steel, is vigorous, with no requirement for support. It can store the alignment information, making it perfect for dynamic estimating situations, for example, sewage treatment, drinking water control, angle ranches and comparable. It works over an measuring range from 0 to 20 mg/l and temperatures up to 60 °C

• Material: ABS housing
• Measuring ranges: Ambient model: from 0 to 500 ppm. Duct mount model: from 0 to 500 ppm.
• Item Code: CO110
• Display Type: With or without 10-digits LCD display
• Output Range: 0-10 V or 4-20 mA
• IP Rating: IP 65 (duct mount model) and IP 20 (ambient model)

We are offering 30-8-0006 (k 30 module - oem purpose) esense™ ip50 is used to measure indoor air carbon dioxide concentration. This product is an ultra-compact transmitter intended for factory mounting for both wall and duct applications with the protection class ip50. A 300 mm long cable connected to the pcb makes it possible to place the sensor where mounting is difficult. model - esense™ slim ( 030-8-006) (ultra-compact transmitter intended for factory mounting for both wall and duct applications with the protection class ip50, no display) measurement range 0 to 2000 ppm power supply - 24 v acdc out1 linear output - 0 to 10 v dc (co2) out2 linear output - none operation temperature - 0 to 50°c dimensions (h x w x d) - 106 x 67 x 26 mm accuracy - ± 30 ppm ± 3 % of reading

tem Code: BP-935-series Keeping in sync with the ever-changing demands of the customers, we are engaged in catering to the variegated demands of the customers by bringing forth a highly advanced range of ORP pH Electrodes. Our range is manufactured in strict accordance with the global quality standards by employing genuine tools and advanced machinery. Further, the entire range is thoroughly tested on varied parameters to assure flawlessness & zero-defect. Features: Type: Platinum Ring Body: Glass PG mounting: 13.5 Diameter: 12 mm S7 connector for detachable cable Available lengths: 120 mm, 170 mm, 225 mm and 325 mm Steam Sterilization Needs NO Pressurization Rugged Low Maintenance Compatible with all pH Instrumentation

• Operating Temperature: -10 Degree C - +55 Degree C
• Humidity Operating Range: 0 - 95%
• Model Name/Number: HSE-THS-001

The sensor measures the dielectric constant of the soil in order to find its volumetric water content (VWC). It obtains volumetric water content by measuring the dielectric constant of the media through the utilization of capacitancefrequency domain technology. Since the dielectric constant of water is much higher than that of air or soil minerals, the dielectric constant of the soil is a sensitive measure of volumetric water content. The sensor has a low power requirement and very high resolution. This gives the ability to make many measurements (i.e. hourly) over a long period of time with minimal battery usage. In addition, the sensors incorporate a high frequency oscillation, which allows the sensor to accurately measure soil moisture in any soil with minimal salinity and textural effects. An on-board voltage regulator allows factory calibrations to be used with any excitation voltage above 3V. Applications: Irrigation scheduling Vadose zone monitoring Plant-soil-water interaction studies

• Accuracy: ± 0.1°C or better
• Response Time: 60 seconds
• Output: DC analogue, RS 232
• Accuracy: ± 3% or better
• Response Time: 60 seconds
• Range: -5° C to +60° C
• Resolution: 0.1°C
• Sensor type: Resistance Type
• Connecting cable: Cable length: as required
• Accessories: All accessories (fixing units, etc.) as required
• Tools: Complete tool kit for installation and routine maintenance are given with full detail (number of pieces and type)
• Range: 0% to 100% RH
• Resolution: 0.50%
• Sensor type: Capacitive / solid state
• Connecting cable: Cable length: as required
• Accessories: All accessories (fixing units, etc.) as required
• Tools: Complete tool kit for installation and routine maintenance giving full detail (number of pieces and type)

We are offering bt radio frequency moisture sensor. The rfm – 1000 is an rf moisture sensor made up of an electrode, an oscillator and digital circuitry. The electrode can be of different lengths up to 48″. The rf – 1000 is not affected by product color changes. up to 48″ in length fully digital electronics no moving parts no maintenance required

• Material: Stainless Steel
• Usage/Application: Industrial
• Brand: Honeywell
• Model Name/Number: C7027A
• Surface Finishing: Polished

• Type: UV SENSOR
• Material: Stainless Steel
• Usage/Application: Industrial
• Brand: Honeywell
• Model Name/Number: C7027A
• Surface Finishing: Polished

alcohol sensor, Solar Water Pump Controller, electro mechanical actuators

moisture sensor, Temperature Sensor, Mini Surface Thermometer

Humidity Sensors, Barometer, Clamp Meter, Dew Point Meter

Oxygen Sensor, Damper Actuator, Dissolved Oxygen Analyzer, chlorine analyzer

Metallic ORP Electrodes, reference electrodes

Humidity Sensor, plastic float valve

CO Sensor, AHU Valve, Damper Actuator, FCU Valve

Smart Energy Monitor Sensors, touch screen controller, Shock Sensor