Flameproof Limit Switch Dealers

• Usage: Industrial use
• Type: Flameproof Limit Switch
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Phase: Single Phase
• Switch Type: Rotary Limit Switch

• Color: Blue
• Packaging Type: Plastic Packet
• Country of Origin: India
• Rust Proof: Yes
• Usage: General
• Specialities: High Tensile

Description: Suni Make FLP/WP Pull cord switch also known as Rope Operated Emergency switch is used as a safety switch to stop the conveyor belt in case of an emergency. It is also known as pull switch cord. Universal (common) Cast IRON enclosure. Same overall and general mounting dimensions and hence reduction in variety of mounting brackets.Rationalized design and construction allows inter changeability of parts. Special rubber seal (0 ring) on shaft for better protection against ingress of dust, dirt etc. Special Ring & Overlap Fitting to prevent ingress of dust & water.   Standard Specifications: Enclosure: Weatherproof, field mounding type, IP66 Cast Iron, epoxy painted, colour Smoke gray,flameproof (FLP/WP ) enclosure for use in hazardous area, Group lla, llb, llc,Output Contacts: 1NO 1NC/ 2NO 2 NC,Contact Rating for standard models: 40Amp resistive at 440VAC,Standard Operating Position : 1-0 , Reset: Pull Cord Switch: Manual Reset Type   We stand as the most preeminent Limit Switch Manufacturer and one of the supreme Suppliers of the same. Pull Cord type Suni makes FLP/WP Pull Cord Limit Switches are used on Control / Power circuit of reversing drives so as to limit their rotation / movement within a predetermined position. Suni Make FLP/WP Pull Cord Limit switch is Flameproof Testing as per IS/IEC 60079-1:2007 & Dust Ignition protection as per IS/IEC 60079-31:2008 & Weatherproof Testing as per IS/IEC 60529:2001 for IP 66 Enclosue in die cast Aluminium alloy LM6 for used in Zone 21, 22 and 1 & 2 for Gas Group: IIA ,IIB & IIC atmospheres   The function of the Suni make FLP/WP Pull Cord Limit Switch is to stop the mechanism of drive at the extreme The contacts of our FLP/W Pull Cord Limit Switch are rated for 40 amps at 500 Volts A.C. , 50 C/S Continuous,The Crane FLP/WP Pull Cord Limit Switch can be provided with 2 NC contact s or (1No + 1NC) contacts as per The cam shaft on which the cams are fitted is mounted in the housing on moulded bushes of synthetic material which are fixed to the front and rear walls by means of screws.The Cams which are fitted on the cam shaft are moulded from the highest quality synthetic material and are accurately cut to correspond to the switching sequence desired.   The contacts have a maximum continuous Current capacity of 40 amps AC.The contact tips are made of high grade Silver Cadmium Oxide alloy.When used for Series operation [up to 40 Amps maximum], the Contacts are suitable for 720 operations per hour and in case of Shunt operation [for Control Circuit], the Contacts are suitable for 1000 operation per hour. the requirement.This limit switch is some what similar in construction to a Lever Limit Switch except for the Lever. disconnect the motor The Limit Switch contacts are reset when the lever returns to zero position due to Gravitational force.1 or 2 cams are used depending upon whether the Pull Cord Limit Switch is of 1 contact or 2 contacts operation.

• Cable Entry: 03 No. for ¾” ET
• EX-Protection: - Ex-“d” Type
• Gas Gr.: - I ,IIA &IIB
• MOC: - Pressure Die Cast Aluminum Alloy LM6 Zone Classification-Zone 1 & Zone 2
• IP Protection Class: -IP65
• Finish: - Light gray Epoxy Polyester Powder Coating Shade No 631
• Earthling: -Internal -01 No. External -02 Nos. Cable Entry - 03 No. for ¾” ET
• “O” Ring: -Endless molded neoprene
• Hardware: -In Stainless Steel

IP 67 degree of protection, Choice of 16 operating heads, Interchangeable heads ensure complete modularity and flexibility, Zinc die cast body for heavy duty applications, Easily replaceable contact blocks, Precabled version with 2m cable length

The drive consists of flame proof motor, brakes, switches and push buttons. All electrical fittings are flame proof suitable for group I, IIA and IIB gases. Flame proof limit switches for extreme ends in horizontal and vertical movement. Flame proof local control panel and main incoming isolator with contactor, thermal over-load relays & MCBs.

• Size: 130mmx130mm, 62.5mm max dia
• Gas Group: IIA, IIB and IIC
• Zone Protection Class: Zone 1 and Zone 2
• IP Protection: IP65/66
• MOC: SS304,SS316,SS316L, Brass Nickel Plated, Aluminium Alloy (LM6)

 Applications :   1) FLAMEPROOF-WEATHERPROOF for limit switch with contact     element.   •  Features :   1) High Tensile strength   2) Protect  IP65/66   3) Available for Zone1 & Zone 2   4) Gas Group IIA , IIB and IIC   5) Ex d , Explosion Proof, FlameProof, Weatherproof

• Cat No: KJB-A-08
• Gas Group: I, IIA & IIB
• Protection: IP 66
• Elect.Rating: 10 A, 415 VAC

• Type: Crane Limit Switches
• Certification: CIMFR
• Voltage: 230VAC
• Frequency: 50HZ
• Power: 10-15Amp
• Country of Origin: India
• Hole Diameter: 0-20mm
• Max. Lifting Height: 500-700GM

• RATINGS: TOP PUSH ROLLER 1NO+1NC

the products to meet more stringent benchmarks for Safety, Reliability & Performance. Explosion protected equipments are meant for installation and use in these hazardous locations to ensure safety of plant, equipment and personnel and to ensure safety and reliability of operation.

• Current Rating: 40 AMPS at 500 V.A.C.
• CONTACT SEQUENCE: 2 NC.

Limit Switch is a switch operated by the motion of a machine part or presence of an object. These are used for control of a machine as, a safety interlock or to count an object passing a point. Limit Switch may be directly mechanically operated by the motion of the operating lever.

We are counted amongst as the foremost manufacturers and suppliers of an extensive range of Flameproof Limit Switch. The provided switch is precisely manufactured in adherence to industrial standards using quality approved raw material with the aid of sophisticated technology. This switch is highly demanded in the market owing to its resistant to catching fire and strength by our precious patrons. Available in diverse technical specifications, this switch is duly inspected by our quality controllers to ensure its quality.Features:  Corrosion proof Quality assured Longevity

• Type: Flameproof Limit Switch
• Material: Die Cast Aluminum Alloy LM6
• Certification: ISO 9001:2008 Certified
• Current Rating: IP66
• Switch Type: Lever Limit Switch
• Surface Treatment: Epoxy Polyester, Powder Coating
• Gas Group: IIA,IIB
• Zone Classification: Zone 1 & Zone 2

We offer flameproof limit switch. Available in all type of roller arrangement Solid State Non-Contact limit switch such as photo-optic, magnetic, proximity & namur are available

• Switch Range: AC 250V 3A,125V 5A,DC 250V 0.2A,125V 0.4A,30V 4A
• Terminal: 8 Points

We Manufacture Quality Valves of almost all types for a wide spectrum of users in the Process & Chemical,Refineries & Petrochemicals,Fertilizers,Drugs & Pharmaceuticals,Thermal Power Stations, Nuclear & Atomic Power Stations,Textiles,Dyes & Intermediates, Paints & Varnishes, Sugar,Breweries & Distilleries,Soaps & Detergents, Steel Plants,Food & Oil Industry, Solvent Extraction Plants, Sewage, Effluent & Water Treatment, Cooling Water,Ship Yards and Marine Management,Water Works,Pulp & Paper,LPG Bottling Plants, Onshore & Offshore platforms, Slurry & Ash handling.

We are leading manufacturer & exporter of flameproof lever limit switches. The flame-proof type of lever limit switch are designed for operation in hazardous environment where explosive gases/vapors are present. The robustly designed flameproof enclosure is a closed grain aluminum casting and is vacuum impregnated. The enclosure is certified by cimfr for groups i, ia and iib. Each casting is subjected to hydrostatic pressure test as specified in the standard. Lever limit switch is used for heavy duty e.o.t. Cranes, wagon shunting devices etc., to prevent over traveling or over traversing on power and control circuit up to 500 volts a.c. 50 hz and 10amps and 40 amps current rating. specifications: material:box and cover a1. Lm-6 enclosure: totally enclosed protection: ip - 44 rated voltages: 24 v to 550 v

• Rated Voltage: 240 VAC
• Country of Origin: Made in India
• Brand Name: shivasai
• Usage: Assembly Machines
• Switch Type: Lever Limit Switch
• Pole Throw: SPDT
• Features: Optimum performance, Longer service life, Quality-tested
• Item Code: flpl