Flow Meter Dealers in Balanagar, Hyderabad

• Features: Leak proof, Pressure controlling capacity, Fine finish

• Display: Digital
• Brand Name: KEHKASHAN
• Flow range: 5 kg/Hr to 500 t/hr

We are the leading manufacturers, exporters and supplier of this products.

Ultrasonic Flowmeters operating on the Time-of-Flight or Transit Time principle, use sound waves to accurately measure flow, particularly for non-conducting liquids like hydrocarbons and difficult applications like molten sulphur, bitumen, pitch and tar. They are especially suited to large bore pipelines and their accuracy is unaffected by changes in conductivity, density or viscosity. For process applications there is the Fullbore type model with sizes from 25mm to 3000mm. A clamp-on type in portable and fixed versions is available for pipe diameters upto 5000 mm. A CE product Compliance with E N61324Ultrasonic Transit time Measurement 40 Pico second sampling rate 8 mm to 10000 mm, +/- 20 m/sBuilt in data logger Up to 47000 recordsBuilt in printer interfaceBuilt in pressure (Head) measurement *Suitability with Partially filled pipe lines*Accuracy better than +/- 1 % of reading.Low power consumption less than 2.5 W PC connectivity through RS 485 / RS 232 port A new generation flowmeter. Best option against traditional full bore Magnetic & Woltman Bulk flow meters, flowmeter. 100% tamperproof, ideal for billing, available with retrofitting models for traditional Bulk water meters. Multiple options with GSM / GPRS connectivity, available with pre-paid water card up to sizes 200mm. OPEN CHANNEL FLOW MEASUREMENT : Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Ideal for Utilities, storm water, combined effluent, raw sewage, irrigation water and streams. The model II uses a submerged ultrasonic sensor to continuously measure both Velocity and Level in the channel. The sensor is a completely sealed ultrasonic unit with no orifices or ports. It mounts inside a pipe or at the bottom of a rectangular, trapezoid or egg-shaped channel. Calibration is simple: enter the pipe diameter or channel width and the meter computes the flow volume and displays the flow rate. Standard features include: sensor – measures flow Velocity and Level sensor cable – 25 ft / 7.6 m submersible, shielded 3-coaxial enclosure - watertight,IP66 (NEMA4X) polycarbonate displays - Flow Rate - large 4-digit LCD Totalizer/Menu/Status - 16-digit alphanumeric calibration - built-in 3-key programmer output – three isolated 4-20mA (1000 ohm), Flow, Level and Velocity 2 control relays - 5 amp, SPDT - programmable for flow proportional pulse output, flow and/or level alarm power input - 100-160VAC 50/60Hz electrical surge protection and RFI filters - AC, sensor, 4-20mA logger optional

• Material: Stainless Steel
• Application: Industrial
• Feature: Digital Water Meter Display, Lorawan Compatible, Multi Jet
• Voltage: 220V
• Automatic Grade: Automatic
• Driven Type: Electric

Flexible Monitoring, Simplified Automation Masibus 1006 is a panel-mount rate totalizer with separate rate and total display in 1/4 DIN size. It accepts linear current/voltage and pulse input for flow monitoring. This Indicator shows process variable on 4-digit and integrated total value on 6-digit display. Measured parameters are displayed with high accuracy and floating decimal point position.  Model-1006 has two optional relays and one digital input to configure simple flow batching operations at High/Low, Pre warn or End of process set points. It can be interfaced with SCADA/PLC using RS485 communication and analog retransmission output for process automation. A selectable square root extractor function enables output from a differential flow transmitter to be displayed in linear units. It has power supply option of 230/110VAC or 24VDC. It is also equipped with transmitter power supply to excite field sensor/transmitter. This model is available in metallic enclosure as well as weather proof (IP55) or flame proof housing with wall mounting facility. Features 4-Digit Flow Rate display 6-Digit Total Value display  Programmable conversion factor Two Flow and Batch Control Relays Floating decimal point and Roll-over record Selectable square root extractor High/Low, Pre warn and end of process set points Transmitter power supply  Retransmission output  RS485 serial communication

• Display: Digital
• Weight: 514 g
• Country of Origin: Made in India
• Size: 100 H x 66 W x 20 D mm
• Power Source: 3 x AAA Batteries

Based in Hyderabad Telangana, we are the leading manufacturer and supplier of Supreme Quality Flow Indicating Totalizer. Specially-acclaimed for their precision, the Flow Indicating Totalizer we offer consists of a magnetic flow tube and an electronic flow converter. In order to meet the requirements of our esteemed clients, we also offer specialization facility. The raw material used for the manufacture of these Flow Indicating Totalizers is sourced from most-reliable vendors, which is the reason for its good quality.

• ANY: ANY

application media water, any liquidrndisplay localrnflow range(min-max) all rangernline size anyrnprocess automation offer you solutions and products in level, flow, pressure, temperaturemeasurement, liquid analysis, system components..

• Application: All type of liquids
• Packaging Type: Packed in corrugated boxes
• Condition: New

The powerful transmitter is easy to use and provides the output signal that meets the needs. Process Master FEP300 is a versatile, reasonably priced, most accurate flow meter tailored for all process industry applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation.   Versatile and simple configuration :Through glass configuration eliminating the need to remove the cover and reducing commissioning time Soft key based functionality "Easy Set-up" function  State-of-the-art memory technology : Data storage enables transmitter exchange without the need for reconfigurationDiagnostics for real-life-situations  : Simplified plant trouble shooting Status messages in accordance with Namur Help texts in LCD display Scan Master in situ verification software option : Allows the customer to perform in situ verification of the flowmeter and the plant

Gas Flow Meter

ABB Electro FEP-300 Magnetic Flow Meter is designed specifically to meet the increased requirements on advanced flow meters. The modular design concept offers flexibility, cost-saving operation and reliability whilst providing a long service life and exceptionally low maintenance. Integration into ABB asset management systems and usage of the self monitoring and diagnostic functions increase the plant availability and reduce downtimes.   Features:  • Versatile and simple configuration   • Data storage enables transmitter exchange without the need for reconfiguration   • Diagnostics for real-life-situations like Simplified plant trouble shooting 

Solenoid Valves, Supply, Automatic Over Head Tank Controlling Systems

Coriolis Mass Flow Meters, Blackmer Liquified Gas Compressors

Centrifugal Pumps, Dosing Pumps, Ball Valves, Bottom Flush Valves

Brookfield Powder Flow Tester, Brookfield Viscometer, Laboratory Equipment

solid flow meters, auto bag filling system, belt weigh feeders

Temperature Indicator, Ignition Transformer And Rod