Flow Sensors Dealers in Hyderabad

Siemens QVM62.1 Air Flow Sensor is utilized to monitor air velocity in ducts.Features:• Mounting flange allows the installer to vary the probe insertion length into the duct space for best control• Mounting flange dampening gasket minimizes vibration• Graduated probe ensures maximum flow accuracy• Flow directional arrow provides for the most accurate reading• Connection cable provides mounting flexibility• Three jumper selectable flow measuring ranges accommodate any application or environment

SVR – Surface Velocity Radar The SVR allows scientists to determine the surface velocity of water. Designed specifically to measure streams and rivers, the SVR gives you precise speed measurement from a stationary position outside the body of water. Face Panel   The face panel includes a 3-digit speed display and three buttons: menu, select, and power. Using the “menu” and “select” buttons you can control display backlighting, cosine correction, serial communication output mode, and high / low speed range settings. Angle Correction The SVR includes cosine error correction, allowing the unit to account for target angles not parrellel to the direction of water travel. The SVR includes an internal sensor to detect vertical angle, and allows users to set horizontal angles to ensure accurate speeds.

Plastic Helical Rotor Flow Sensor And Meter   Model No :: BT-PHTFS- Liquid flow sensor and meter Product Specification :: BROIL Developed and Produced helical rotor flow sensor specially for Liquid dispensing industries, now a day liquid dispensing industries use plastic turbine flow sensor its k factor change with flow rate so for solution we developer helical rotor plastic flow sensor with same pulse k factor for full range also provide very good accuracy and repeatability in full range of measurement With very low pressure loss. Plastic Helical flow meters are positive displacement meters with a very favorable low pressure drop behavior. therefore perfectly suited for the flow measurement of very high to low viscosity fluids.  Due to wide measuring ranges, high accuracy and resolution helical flow meters are an excellent  choice for laminating systems, painting systems, adhesive dispense systems,  as well as batching systems for various fluids.Tchnical specification of plastic helical rotor flow sensor and meter Material of construction: Enclosure                   : PA66 + GF Rotor                          : PA66/POM/PPS Shaft                           : Hard Stainless Steel-316 bearing : carbon/pom with hard S.S. BALL Accuracy (standard installation position) : +/-  0.5 or 1%  FSD Repeatability : 0.05%                                                                                                              Maximum working pressure : 2.5 MPa                                              Fluid &Ambient temperature: -40 to 120 Deg. C Connection: Thread (M)   1) Pulse output sensor : a) Hall sensor Power voltage: 5 to 24  V DC/ Low power: 2 to 5 V DC Output signal: NPN open connector                                           Output:   high electric level : High than 4.5 VDC( input voltage 5 VDC) low electric level  : lower than 0.5 VDC( input voltage 5 VDC) b) Reed sensor c) pick up coil - two wire/ amplified three wire option    2) Battery operated meter  : Power voltage: 3.0 Vbatteries can be used more than 1 years in a row. display mode: Double row Liquid Crystal Display (LCD), as follows:      L XXX. X    four instantaneous flow (m3 / h) or L/h      L XXXX. X    Partial total  (m3 / h) or L/h      XXXXX.X*100  eight cumulative flow (m3)  or L     XXXXX.X*100  eight cumulative flow (m3)  or L( never reset total) Cumulative flow: automatically expand the display precision, the cumulative flow/partial values can be reset. Power-fail protection: instrument coefficient, the Total flow values ten years is not lost when power supply drop.   3) Display with 4 to 20 mA Output Power voltage: 24 V DC Output signal: 4 TO 20 mA     Helical flow sensor model no wise  Technical data:  Model no                   Connection(M)                   Range                           Pulse/Litter    BT-PHTFS-004            1/4 BSP                        5~40~400 L/H                        4200 BT-PHTFS-008            1/2 BSP                     10~150~1500 L/H                     1200 BT-PHTFS-012            3/4BSP                      50~500~5000 L/H                     215 BT-PHTFS-020            1” BSP                      80~8000~8000 L/H                       97 BT-PHTFS-025            1.25” BSP              100~1000~10000 L/H                    52     Product Features :: Features :  High accuracy                : Pressure: up to 25 bar                 : Independent of viscosity, perfect for 1 to 106 mm²/s                 : Low pressure drop compared with other positive displacement meters                : High resolution                 : Pulsation-free measurement, non-sensitive to pulsating flows                : Resistant to corrosion by advanced materials and bearings Range :: Applications : Very good for WATER ATM, water dispensing, tea/coffee/wine/juice and other food liquid measurement and dispensing, : Polyurethane and polymer : Light and heavy fuel oil : Petrochemical products: Thixotropical fluids : Fat and oils with varying viscosities : Test rigs with varying viscosity and fluids : Water / glycol mixtures: Crude oil, furnace oil, and all viscous liquid even viscosity change with Temperature  Product Applications :: Pure Water Fuel Oil High Viscosity Liquid Heat/BTU Hygienic Liquid    

We provide superior quality Flow Sensor at the most affordable rates to the clients. Manufactured from quality components, our Flow Sensors are highly demanded for numerous Automotive, Medical, and Bioprocess applications. This Flow Sensor works on Calorimetric principle and due to that it efficiently monitors Air-flow in duct applications. Appreciated ForEasy installationHigh accuracyLong functional lifeHassle free functioningProviding operational ease Technical SpecificationsRange : 3cm to 300 cm per secOutput : Switching-PNP, 4-20mA, 0-10v Ex-proof versions, Namur type, all versions offered

Siemens QVM62.1 Air Flow Sensor is used to monitor air velocity in ducts.   Features: • Mounting flange allows the installer to vary the probe insertion length into the duct space for best control • Mounting flange dampening gasket minimizes vibration • Graduated probe ensures maximum flow accuracy • Flow directional arrow provides for the most accurate reading • Connection cable provides mounting flexibility • Three jumper selectable flow measuring ranges accommodate any application or environment

• Flow Range: 1 to 30 Liters/Minute
• Temperature: -25 to +80 Deg Cel
• Pulse Per Litre: 450
• Working Humdity: 35%-80%

Water Flow Sensor, gps, Bluetooth Module

Airflow Sensor, Damper Actuator, Dissolved Oxygen Analyzer

Water Over Flow Controlling Sensors, Water Tank Sensors