Gas Compressors Dealers in Hyderabad

we are able to meet standard as well as tailored packaging requirements of the patrons. For us ensuring distribution of order on time is not a big thing is easy, as we have a dynamic logistic system that empowers us to reach patrons within the promised time.

DEVI manufactures Liquid Ring Compressors and Systems for Chlor Alkali Industry in Various Sizes starting from 6 TPD to 150 TPD. We are Designing and Supplying these Compressors as per the Customer requirement and Site Conditions. There by achieving Optimum Efficiencies with Energy Savings. Over the period the brand DEVI has become synonymous with Chlorine Compressors and Systems in Chlor Alkali Sector.  We are empowered with a vision to supply Quality Product with Superior Metallurgy to ensure longer life combined with better performance  and offering prompt service for the optimum utilization of technology by the Customer. This vision has helped us to improve the recurring business. To gain Broader Client base, we facilitate our Esteemed Clients with Custom made systems to suit their requirement. We also share the Technology Up-gradation of the Products with our clients from time to time. 

• Power Source: Electric
• Application: Industrial Usage
• Pressure: High ,Low ,Medium
• Type: Gas Boosters
• Color: Red,Blue,Grey,Sky-Blue
• Condition: New,Used
• Automation Grade: Manual

Devi liquid ring compressors are rotary machines in which the liquid is made to act as piston. This liquid will vary depending on the gas to be compressed the overhung shaft is supported by Angular contact bearings. Shaft sealing is provided by mechanical seal. We are having various models to suit the customer requirement. Our manufacturing range starts from 150 m3/ hr to 2500 m3/hr depending on operating conditions. Some of the major Industries where these Compressors used are : Chlor Alkali Industry : For compressing Chlorine Gas. Petrochemical Industry : For compressing highly inflammable Gases like Flare Gas, Propane etc.,.Steel Industry : For compressing Argon Gas. Pharmaceutical Industry : For compressing Air, Hydrogen peroxide and other critical Gases. These Compressors are used in highly corrosive and critical gas applications. At present we are manufacturing Single Stage Compressors which can develop a Pressure of up to 4.5 bar and on the verge of developing two stage Compressors for pressures up to 7.5 bar. Further our Compressors are having following advantages : Metallurgy : We are supplying the Compressor Parts in Superior metallurgy suitable for particular Application Shaft Sealing : Generally, we supply the Compressors with Mechanical Seal, but it may change basing on the requirement / specification of end user. Design Features : Our Compressors are of Back pull out design with Spacer Coupling hence require less down time for maintenance Performance Testing : We are having in-house Testing facilities for Testing the Compressors prior to dispatch as per API 681 Standards Quality Systems : a) ISO 9001 - 2008 Certification 

We are offering gas boosting system etc. Basically used for boosting, transfer and pressurization of various gases. Has a capability of boosting gas up to 2690bar

The Protech Compressor monitoring System (CMS) monitors the flowing Air compressor parameters: CFM GENERATED BY THE COMPRESSOR ENERGY CONSUMED (KWH) LOAD /UNLOAD PRESSURE OF THE RECEIVER TANK. AMBIENT TEMPERATURE RUNNING HOURS AIR INTAKE FILTER MONITOR KPI (KEY PERFORMANCE INDICATOR) LEAK TESTER CFM Generated By the compressor: The measurement and logging of compressed air CFM is very important to ensuring a compressor is performing efficiently. It accurately estimate the amount of compressed air a particular compressor is producing, and this can related to the actual specification of what is the compressor was supposed to produce as per the manufacturer. In the past the measurement of flow was an inaccurate and very expensive exercise. Protech flow measurement technology has made thermal mass flow measurement very affordable and very easy to install for any organization, even for small systems. While the total accumulated air volume is important, the instantaneous lows tracked over time can reveal some system problems that can cause system performance deficiencies. For example, in a shift oriented plant with minimal weekend production the air flow at midnight on a Saturday might be a good indicator of system waste due to leakage and abandoned production machinery left to consume air when the machine is turned off. Energy consumed (KWH): The system measure the energy consumed KWH this is the key parameter in estimating the operation cost and also helps in the calculation of the KPI. These readings can be used in conjunction with flow measurement to keep track of system efficiency in terms of specific power The actual power consumption of a compressor is often a complete surprise. For example a recent measurement revealed a set of 55 kW rated air‐cooled screw compressors at an industrial site were consuming 70 kW each at full load and rated pressure. Still another 75 kW compressor was consuming 92 kW under the same conditions, and was consuming far more power than rated in the unloaded condition. This information was very useful to then as assumed that the units would be consuming no more than nameplate rating like other similar electrical equipment. Load / Unload: The measure the load and unload of the compressor. Power draw when fully unloaded varies from about 60% of full load power to about 30% of full‐load power, depending on compressor design and on the length of time the compressor runs unloaded. This is a important parameter to monitor to help save energy. By logging this parameter necessary action can be taken to reduce unloading. It also calculated the amount of energy consumed during unloading. Pressure of the receiver Tank: So for higher pressure cut‐out set, we get less flow & at higher power consumption. For Less pressure cut out setting, we get more flow and at less power consumption. Please make use of these figures in industry "compress less & conserve more"If the pressure setting of a compressor is reduced by 1 kg/cm², the impact it will have on power consumption reduction by 6‐10%. Ambient Temperature: When the temperature of the inlet air to the compressor raises by 8°C the Power consumption increases by 2%. Running hours: This help in performing your maintenance work. Air intake Filter monitor: This tell you how much your air intake filter is clogged .If there is a clogging of the filter, it will effect the compression ratio and in turn will increase the power consumption of the compressor. As thumb rule "For every 0.355 Psi pressure drop increase across at the suction path due to choked filters, the compressor power consumption increases by about 2 % for the same output". KPI (Key Performance indicator): Protech CMS has made the monitoring of key compressed air performance indicators (KPI's) possible now than ever before. Compressed Air KPI's: With regard to the performance of compressed air powered compressed air equipment the most important indicator is definitely system pressure. But other aspects of the system are important as well. Knowing the cost of producing the air is important too, especially with rising electricity rates. This means the power consumption of compressors and associated equipment is an important factor. So too is a measurement of the compressed air flow produced by the air production equipment. Once power input and output flow are measured system specific power can be calculated which is an indicator of how efficiently your equipment produces air for a given energy unit input.The Key Performance Indicator (KPI): kW/100 cfm The Protech CMS can produce reports on different areas, we recommend that managers focus on Key Performance Indicator (KPI): kW/100 cfm. This represents how much energy (in kW) is used to deliver how much air flow (cfm). The Protech CMS provides the tools required to monitor this KPI for each air compressor. This will also tell the cost of each CFM. Leak tester: The system can be used as leak tester and also calculate the losses due to leak. This can be done by closing all the usage point and check how much CFM is lost. A distribution system of 100 PSI of pressure, running 12 hour a day with a leak of

• Power Source: Electric
• Application: Industrial Usage
• Pressure: High ,Low ,Medium
• Type: Gas Boosters
• Color: Red,Blue,Grey,Sky-Blue
• Condition: New,Used
• Automation Grade: Manual

Liquid Ring Compressors, Vacuum pumps, water separation systems

Ammonia Compressor, ring compressors, compressor nebulizer

Ammonia Compressor, Air Oil Cooler, Reciprocating compressor controller

Gas Compressor, Air Compressor

Blackmer Liquified Gas Compressors, Steam Jet Ejector System

Chlorine Gas Compressor Systems, Liquid Ring Compressors:

Gas Compressor

cng compressors, Tushaco Two Spindle Screw Pump, Air Compressor