Hammers Dealers in Hyderabad

• Color: Any
• Application: Ore Mining
• Usage/Application: Water Well Drilling
• Brand: Getech
• Hammer: 3", 4 3/4", 6", 8", 10", 12"
• Usage: Hole Drilling

• Brand Name: KLR
• Finishing: Polished
• Handle Material: Metal
• Condition: New
• Country of Origin: India

KLR Hammers are the most sustainable Hammers and they give a very long life. The Hammers are ISO 9001: 2015 Certified.

• Size: 1 A 1B
• Material: Forged ms
• Length: Gate raw materials
• Packaging Type: 50 kg bag

• Type: Dth Hammers, Mining
• Brand Name: SAI DEEPA
• Port: MUMBAI / CHENNAI
• Place of Origin: Andhra Pradesh, India
• Packaging Details: As per customer requirement.

• Type: Club Hammer
• Brand Name: OZAR
• Weight: 1-2Ton
• Condition: New
• Finishing: Polished
• Handle Material: Wooden
• Warranty: 6months
• Hammer Type: Club Hammer
• Handle Length: 8inch
• Material: Iron
• Application: Construction, Industries
• Feature: Durable, Fully Heat-treated, Polished Bell Face, Rust Proof, Slip-resistant Handle

• Size: All types of hammers
• Color: Based on customer
• Product: Hammer

We use best material in the market to give our customer a very good product life. 

• Warranty: 1 Year
• Brand Name: PRL
• Color: ALL
• Ranges: 12”
• Category: Drilling Rig Accessories
• Usage/Application: Drilling
• Make/Brand: Prime Rigs Limited
• Drilling Range: 12 Inch
• Hammer Type: DTH
• Length: 15ft
• Thickness: 2 Inch

We are a well-known name in the manufacturing, supplying and exporting of DTH Hammers and Bits. The DTH Hammers and Bits are a perfect and unique range of Valve & Valve less Hammers and Bits for high pressure drilling and for excellent penetration rate. The hammers we deal in are of size 2-1/2" to 10" in diameter and bits are of size 3" to 18" in diameter. To save our buyer’s valuable time and money, we deliver bulk orders.

• Weight: 1/2 - 1 Kg
• Finishing: Polished
• Handle Length: 7inch
• Application: Household, Industries
• Feature: Durable, Rust Proof
• Material: Alloy Steel

ODEX (short for “Overburden Drilling Excentric”) is also called Stratex, Tubex or ODS. It is an adaptation of the air-circulation DTH hammer. It is with a swing-out eccentric bit to ream the bottom of the casing. And the percussion bit consists of two parts fixed tips: a concentric pilot bit, and behind it is an eccentric reamer bit that swings out to enlarge the borehole diameter during drilling. After the eccentric bit is a guide device that engages a special internal shouldered casing shoe on the bottom of the ODEX casing. The ODEX is thus pulled down by the drill string as the hole is advanced. Cuttings blow up through the annulus gap between guide device and casing shoe to a swivel conducting them onto the ground or to a sample collector. Odex System Since based on advance technology, we are involved in offering best quality of Odex System. The offered Odex System is extensively used in various suitable applications. Moreover, we ensure to satisfy the entire requirements of the clients in all manners. These products are fabricated utilizing higher grade steel alloy, in distinctive diameters. These ODEX hammers and Bits are offered in various models and styles for suiting the particular drilling condition under varied operation level. The alloy steel that we use is passed through radio graphic and ultrasonic tests. Further, we ensure that the Odex Bits are heat treated in most advanced methods to assure a qualitative range offering optimum functioning. AQ DrillTech has supplies different ranges ODEX systems sizing from 3” to 10”. They all consist of Guide Device, Casing Shoe, Eccentric Reamer, Pilot Bit, Guide Sleeve, and Locking Kits.

• Type: Dth Hammers
• Application: DTH Use
• Feature: Fully Heat-treated
• Condition: New
• Finishing: Polished
• Country of Origin: India

manufacturers of 2'' to 8'' hammers used for mining, construction and water well segments. 

• Brand Name: KALA

We are offering 4.5 dth hammer. Hammer specifications :- hammer sizes : 3”-12” outer diameter: 68 mm to 273 mm length : 810 mm to 1560 mm weight : 16 kg to 580 kg hole size : 75 mm to 428 mm

GETECH Cluster Hammer (HIPPO) is manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The product is heat - treated in the most modern, fully process controlled, in house facility. The Tungsten carbide buttons which are used are obtained from leading and reputed indigenous and foreign manufactures.

• Type: DTH HAMMER
• Weight: 90 kg
• Model Number: BRD\DH 152 200
• Key word: MEGA BUTTON BIT SUITABLE HAMMER
• Model: VALVE LESS -DTH HAMMER
• Supply Ability: 50 Unit/Units per Month
• Material: Alloy Steel
• Length: 1250mm
• Place of Origin: Telangana, India
• Packaging Details: 1. Gunny Bundle (OR) 2. Wooden Box Packing will be provided as per customer requirement.
• Port: chennai

KGR firm is one of Cluster Hammers Exporters advanced with endless experience, Cluster Hammers Exporters offer execution based extent of Cluster Hammer. With correctness, High quality, solid guidelines and phenomenal quality are the key driving gimmicks of the whole product offering. Also, Cluster Hammers Exporters offer them according to the definite inclination of customers. KGR Cluster Hammer is a quality item that affirm to universal norms and strict quality control systems.

• Material: High Speed Steel
• Size: 4-6 mm
• Type: DTH Hammer
• Length (mm): 150-300 mm

we have garnered wide recognition as dth hammer manufacturer, exporter and supplier in andhra pradesh, india. The dth hammers that we deal in are fabricated from quality alloy steel as per international specifications. Machined to high precision, our dth hammers are par excellence. The dth hammers can be purchased in different models from us. attributes longer product life higher and consistent penetration rate the capacity and capability to perform hitch-free at higher pressure range (80-350 psi) reduced number of parts, and compact structure for lower rate of wear & tear avoidance of back hammering, hammer blocking etc. minimum maintenance costs why our dth hammers? the dth hammers are heat - treated in the most modern, fully process controlled, in-house facility. the carbide buttons which are used are obtained from leading and reputed indigenous and foreign manufacturers. getech hammers are quality products that conform to international standards and strict quality control methods. getech products are constantly improved with adaptation of the most recent manufacturing technologies and the product features always provide complete value of money.

• Material: Steel
• Usage/Application: Mining & Drilling
• Length: 12-13 Inch
• Shape: Round

• Material: MS
• Length: 2-4 Inch
• Usage/Application: Water Drilling
• Surface Finish: Galvanized
• Diameter: 50-100 mm

Drilling Adopters offered can be made available by us in a large selection of choices to pick from and can be made available with different threading support so as to perfectly match up with the specific end usage demands. These adopters are suitable for use with both dry and wet drill bits and offer dependable operation support involving making holes in reinforced concrete, brick wall and other similar surfaces. Some of its features include use of quality steel to make strong finish bit body; allows for fast cutting speed and low pressure working performance; choice of different connection ends.

• Rated Voltage (V): 220
• Rated Frequency (HZ): 50
• Max Drilling Dia (mm): ø 20
• No-load Speed (RPM): 0-850
• Rated Power Input (w): 520
• Max Impact Rate: 0-3900
• PCS/CTN: 5
• Net. Weight (kg): 2.7

We manufacture and supply DTH Hammers of sizes ranging from 3" to 12" diameter. Our hammers are suitable for all global brands of button bits.

KLR Hammers are manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The products are heat-treated in the most modern, fully process controlled, in-house facility. The Carbide Buttons which are used are obtained from leading and reputed indigenous and foreign manufacturers. KLR Hammer are quality products that conform to international standards and strict quality control methods. KLR products are constantly improved with adaptation of the most recent manufacturing technologies and the product features always ensure,   Longer Product Life Higher and consistent penetration rate The capacity and capability to perform hitch-free at higher pressure range (80-350 PSI) Reduced number of parts, and compact structure for lower rate of wear & tear Avoidance of Back Hammering, Hammer blocking etc. Minimum maintenance costs

• Type: Dth Hammers
• Application: DTH Use
• Condition: New, Used
• Finishing: Non-Polished, Polished
• Handle Material: Aluminium, Copper, Metal, Steel, Wooden
• Feature: Durable, Fully Heat-treated, Magnetic Nail Start, Polished Bell Face, Precision Balanced, Rust Proof, Slip-resistant Handle
• Warranty: 1Yrs
• Handle Length: 10inch, 11inch, 12inch

We are the main supplier of this product.

• Brand Name: Carigar
• Weight: 14 Kg
• Voltage: 220 V
• Model Name/Number: 5S 11E-DH
• Size/Dimension: 67 x 22 x 48 Centimeters
• Speed: 2250 RPM
• Maximum Chuck Size: 20 Millimeters
• Maximum Power: 1500 W

Button Bits  Relying on our expertise and profound knowledge of our team, we have bee successful in carving a niche of r ourselves as a prominent manufacturer and exporter of Button Bits. Manufactured in compliance with the industrial standard and norms, our offered bits are renowned for their features such as durability, longer life and outstanding quality. Our offered range of Button Bits is extensively used in mining industry. Moreover, we are offering this product to our clients at reasonable prices. HAMMER HAMMER SIZES : 3”-12” OUTER DIAMETER: 68 mm to 273 mm LENGTH : 810 mm to 1560 mm WEIGHT : 16 Kg to 580 kg HOLE SIZE : 75 mm to 428 mm  

• Brand Name: Virgo
• Warranty: 1 year
• Voltage: 220/110V
• Frequency: 50/60 Hz
• Power Consumption (Watt): 800W
• Impact Rate (bpm): 28000/46000/min
• No Load Speed (rpm): 1400/2300rpm
• Model: H65A
• Item Weight (Kgs): 2.45/2.83 Kg
• Rater Input Rate: 1400/min

• Material: Mild Steel
• Country of Origin: Made in India
• Finishing: Smooth
• Size: 1 x 1.5 Feet
• Brand: Langry / Labline
• Frequency: 0.5KN
• Surface Finish: Smooth

• Usage: Industries
• Condition: New
• Automation Grade: Semi-Automatic
• Material: Mild Steel
• Weight: 2 Ton

We are offering all types of DTH Hammer that are available from us at very nominal prices.

• Combined Hammer: 4" Digger Hammer
• Out side Diameter (mm): 397

GETECH Cluster Hammer (HIPPO) is manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The product is heat - treated in the most modern, fully process controlled, in house facility. The Tungsten carbide buttons which are used are obtained from leading and reputed indigenous and foreign manufactures.