Lever Limit Switch Dealers

We are offering a wide assortment of quality Lever Limit Switches. The Lever Limit Switches are used to prevent over travel of hoisting motion on power. The limit switches generally remain closed and cut off power to stop the motor of the crane. They operate when on reaching a pre-determined position when the lever is moved over a projecting member fixed on the grid. We are a prominent Lever Limit Switch Manufacturer and Supplier from Delhi (India). We can make them available in standard and customized dimensions as per the buyer’s requirements.   Specifications Control circuit up to 500 V 40 Amps continuous current  

• Product Code: LLS(U)
• Availability: In stock

“Speedage” make Limit switches are used for heavy duty E.O.T. Cranes, Wagon shunting devices etc to prevent over travel. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a predetermined position when the lever is moved over a projecting member fixed on the girder. The series limit switch is fitted with four sets of contacts which cuts off two phases of the motor in either direction and is suitable for 500v.a.c. 50 cycles/sec. supply system. The limit switch contacts are automatically reset when the lever returns to zero position due to spring action. The Limit Switches are made in IP 54 enclosure. The housing is made of cast Iron / cast Aluminium.  The base and cover have machined surface to protect against dirt and dust.  

• Switch Type: Lever Limit Switch
• Current Rating: 10 Amps
• Country of Origin: Made in India
• Application: EOT Cranes, Hoists, Material Handling Equipment.
• Body Material: Aluminium Die Cast (Powder Coated)
• Model Name/Number: LS/2SH/2 (Two way) and LS/1SH/1 (One way)
• Power/Voltage: 500 VAC Max
• Warranty: 1 Year for Manufacturing Defects Only.
• Degree Of Protection: IP-55 Confirming to IS-13947 (Part)-1993
• Contact Block: 2 Maximum
• Brand/make: Speedocontrols. other Brands are Offered On Request.
• Lever Position: Usually Downwards. On Request: Upwards.
• Protection Degree: IP-55 Confirming to IS-13947 (part)-1993
• Mounting Position: Floor
• Cable Entries: 2, 3/4 Inch Conduit
• No. Of Contacts: 2 NC
• Contact Material: Silver Cadmium
• Wire Connection: Screw Terminal
• Rated voltage: 500 V.A.C. Max
• Thermal Test Current: 10 A

Lever Type Limit Switch is used for heavy duty E.O.T. Cranes, Wagon shunting devices etc., to prevent over traveling or over traversing on power and control circuit up to 500 volts A.C. 50 Hz and 40 amps current rating

• Type: Lever Limit Switch
• Material: Aluminum
• Switch Type: Lever Limit Switch
• Usage: Industrial Use
• Degree of Protection: IP-55
• Mounting Position: Floor
• Rated Voltage Insulation: 500 V.A.C.
• Thermal Test Current: 10/40 Amps

• Max. Voltage: 220 VAC
• Packaging Type: Plastic Packet
• Country of Origin: India
• Rust Proof: Yes
• Usage: General
• Specialities: Rust Proof, High Quality

Description: Suni Lever Limit Switch is used for heavy duty E.O.T. Cranes, Wagon shunting devices etc., to prevent over travelling or over traversing on power and control circuit up to 500 volts A.C. 50 cycles / second and 40 amps current rating. We are counted among the ecstatic Lever Operated Limit Switch Manufacturers in India. Suni makes Lever type Limit Switch normally remains closed and cuts off power to stop the motor of the particulars motion. Suni Make lever Limit switch operates when its lever reaches its pre-determined position and the lever is moved over a projecting member fixed on the Girder. The Limit Switch contacts are automatically reset when the lever returns to zero position due to spring action. The Lever Limit Switch is made in IP-54 enclosure. In case of IP-54, the cover is of Cast Aluminum. Also in this case the base and cover have machined surface to protect the Limit Switch against dust. The cam shaft on which the cams are fitted is mounted in the housing on moulded bushes of synthetic material which are fixed to the front and rear walls by means of screws. The Cams which are fitted on the cam shaft are moulded from the highest quality synthetic material and are accurately cut to correspond to the switching sequence desired. The contacts have a maximum continuous Current capacity of 40 amps AC. The contact tips are made of high grade Silver Cadmium Oxide alloy. When used for Series operation [up to 40 Amps maximum], the Contacts are suitable for 720 operations per hour and in case of Shunt operation [for Control Circuit], the Contacts are suitable for 1000 operation per hour. The same Contacts can be used in Series as well as in Shunt configurations The switching capacity of the Contacts when used for Shunt operation is 15 amps at 400 Volts, AC on highly inductive load and 2.5 amps at 220 Volts DC. These switching capacities in fact are far in excess of what is actually required in practice and hence replacement of Contacts for Shunt may not be necessary for a long time. The body of the Contacts is made of high grade Melamine which is specifically suited for heavy duty operation .The material is non tracking and is capable of with standing heavy arcing.

• Size: 130mmx130mm, 62.5mm max dia
• Gas Group: IIA, IIB and IIC
• Zone Protection Class: Zone 1 and Zone 2
• IP Protection: IP65/66
• MOC: SS304,SS316,SS316L, Brass Nickel Plated, Aluminium Alloy (LM6)

 Applications :   1) FLAMEPROOF-WEATHERPROOF for limit switch with contact     element.   •  Features :   1) High Tensile strength   2) Protect  IP65/66   3) Available for Zone1 & Zone 2   4) Gas Group IIA , IIB and IIC   5) Ex d , Explosion Proof, FlameProof, Weatherproof

• Country of Origin: India
• Switch Size: 1 Module, 2 Module, 3 Module, 4 Module
• Usage: Restaurants, Residential, Office, Home, General
• Packaging Type: Box, Plastic Packet, Plastic Bag
• Specialities: Rust Proof, Non Breakable, High Tensile, High Quality, Heat Resistance
• Overall Dimension: 4X2X2cm, 10X5X6cm, 20X10X10cm, 50X40X30cm
• Length: 0-15mm, 15-30mm, 30-45mm, 45-55mm

Brand SIBASS Usage/Application INDUSTRIAL Switch Type Lever Limit Switch Pole Throw SPST Rated Voltage 240 VAC Model Name/Number XD2-PA14 Current Rating 10A

Lever Limit Switch For EOT Crane

• Usage: Industrial use
• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Color: Blue
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Current Rating: 10 Amps
• Switch Type: Lever Limit Switch

• Usage: Industrial use
• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Color: Grey
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Switch Type: Lever Limit Switch
• Frequency (Hertz): 50 Hz

• Usage: Industrial use
• Type: Lever Limit Switch
• Material: metal
• Certification: ISO 9001:2008 Certified
• Color: Orange
• Condition: New
• Max. Voltage: 440 V
• Surface Finishing: Polished
• Switch Type: Rotary Limit Switch
• Current Rating: 40 amp
• Features: High strength, Rust proof, Low maintenance

• Switch Type: Lever Limit Switch
• Voltage: 415V
• Usage/Application: Cranes
• Body Material: Mild Steel
• Surface Finish: Paint Coated
• Current: 40 Amp

• Brand Name: HDD
• Usage: Industrial
• Switch Type: Lever Limit Switch
• Current Rating: 10-15 Amp
• Voltage: 220V

• Brand Name: POWERLINE
• Switch Type: Lever Limit Switch
• Usage: EOT CRANE
• Current Rating: 40 AMP
• Voltage: 440 V