Measurement Gauge Dealers in Ferozguda, Hyderabad

We manufacture high efficiency diaphragm gauges having a dial size of 10 mm, 150 mm. These diaphragm gauges are made from aluminium and stainless steel, these gauges are durable and have a longer life. Diaphragm pressure gauges are used to measure gases and liquids. They cover measuring spans from 10 mbar to 40 bar. The measuring element consists of one circular diaphragm clamped between a pair of flanges. The positive or negative pressure acting on these diaphragms causes deformation of the measuring element. The magnitude of the deformation is proportional to the pressure to be measured, and it is coupled to the pointer mechanism.

Restricting to the pre-defined quality parameters, we make sure that the offered array of products is as per the stated norms. In order to ensure zero damage during transit, we have adopted modern facility for meticulously packaging our offerings. And, we also ensure that the used material is of high quality.

• Material: Stainless Steel
• Diameter in mm: 20-40mm, 40-60mm
• Shape: Round
• Operating Mode: Automatic
• Specialties: Accuracy, Easy To Fit, Perfect Strength
• Pressure: 0-5000psi

When selecting a pressure gauge, it is important to consider the following factors to ensure safety and accuracy: 1. Pressure fluid composition 2. Pressure fluid temperature  3. Ambient conditions 4. Pressure range 5. Conditions affecting wear of the system  6. Method of mounting  7. Required accuracy 1. Pressure fluid composition Since the sensing element of a pressure gauge may be exposed directly to the measured medium, consider the characteristics of this medium. It may be corrosive, it may solidify at various temperatures or it may contain solids that will leave deposits inside the sensing element. For pressure fluids that will not solidify under normal conditions or leave deposits, a Bourdon tube gauge is acceptable. Otherwise a Sealgauge or diaphragm seal should be used. A chemical compatibility chart follows this section to aid in the selection of the proper sensing element material. 2. Pressure fluid temperature Steam and other hot media may raise the temperature of the gauge components above safe working limits of the sealed joints. In these cases it is recommended that a siphon, cooling tower or diaphragm seal be used in conjunction with the pressure gauge. 3. Ambient conditions The normal ambient temperature range for WIKA pressure gauges is -40o F to +140o F (-40o C to +60o C) for dry or silicone-filled gauges and -4o F to +140o F (-20o C to +60o C) for glycerine-filled gauges. The error caused by temperature changes is +0.3% or -0.3% per 18o F rise or fall, respectively. The reference temperature is 70o F (20o C). The correction is for the temperature of the gauge, not the temperature of the measured medium. Remote gauge mounting using a diaphragm seal and capillary line is one alternative for applications involving extreme ambient temperature. Moisture and weather effects must also be considered. Liquid-filled gauges prevent condensation build up. For outdoor use, stainless steel, brass or plastic cased gauges are recommended.  4. Pressure range A gauge range of twice the working pressure is generally selected. The working pressure in all cases should be limited to 75% of the gauge range. Where alternating pressure and pulsation are encountered, working pressure should be limited to 2/3 of the gauge range. 5. Conditions affecting wear of the system In applications involving severe pressure fluctuation or pulsation, the use of restrictors and/or snubbers is recommended. In addition, liquid-filled gauges increase the service life of gauges in these conditions. WIKA liquidfilled gauges are generally filled with glycerine. Silicone for larger temperature extremes and Halocarbon® for use with oxidizing agents such as chlorine, oxygen and hydrogen peroxide are also available. 6. Method of mounting Radial (LM) and back (CBM or LBM) connections are available for most WIKA gauges. WIKA stocks gauges with standard NPT threaded connections. Other types such as metric threads, straight threads, hose barbs and special fittings are available as a special order. Pressure gauges should be mounted in the upright position. For applications where the gauge is mounted side ways, horizontally or upside down, contact WIKA Customer Service for gauge type compatibility. 7. Required accuracy WIKA stocks gauges with accuracies from ± 3/2/3% to ±0.1% of span (ASME Grade B to Grade 4A). To ensure safe and accurate gauge selection, you must take all of the above factors into consideration.

 Based in Hyderabad, Telangana we are one of the most-reliable manufacturer and supplier of Level Indicator. We offer Level Indicators in wide range of specifications and models to satisfy the client requirement. Manufactured using raw materials sourced from best-in-industry vendors, our Level Indicators come with an internationally acclaimed quality. These Level Indicators have applications in Oil filled Power Transformers and Oil filled Tanks.

Sheave Gauges are, now, a solution to your worry on worn sheaves and damaged belts. A comprehensive tool to maintain the efficiency of the belt drive system, yourself.

Ace AI-DP1 Digital Differential Pressure Indicator is digital readout differential pressure indicator designed for measuring the room pressure inside Pharma clean rooms, Hospital operation theaters & Isolation rooms. Salient Features include Unit Conversion at the press of a key between mm.W.C.& Pascals integrated buzzer alarm for set point violation, Offset provision to meet Audit requirements, analog 4-20mA Output, 42 mm depth for Clean Room Modular Wall Fitment & RS 485 Modbus communication for BMS/SCADA/PLC integration.

• Type: Mechanical
• Applications: Chemical, petrochemical industry
• Packaging Type: Packed in corrugated boxes

Description : This series of thermometers is designed for installation in pipes, tanks, plants and machinery. Stem and case are made of stainless steel. To allow fitting to the process, different insertion lengths and process connections are available. Through the high ingress protection of the thermometer (IP 65) and its liquid damping, operation under high vibration conditions is possible. Special Features : Application ranges from -70 ...+600 oC 6 different connection designs selectable Case and stem material stainless steel Applications : Chemical, petrochemical industry Power engineering Machine buildung and general plant construction Food industry

Force Gauges, Barometer, Clamp Meter, Dew Point Meter, Digital Hygrometer

One of the suppliers of industrial products, providing various types of products such as differential gauge

Industrial Gauges, Gas Turbine Blades, Press Components, Press Tools

Level Indicators, Rotameters

Pressure Gauges, Humidity Meters, Instruments, scada systems, thermo wells

Telescopic Gauge, Precision Leveling Wedge, hydraulic vise