Measurement Gauge Dealers in Kamalapuri Colony, Hyderabad

• Material: Stainless Steel
• Diameter in mm: 20-40mm, 40-60mm
• Shape: Round
• Operating Mode: Automatic
• Specialties: Accuracy, Easy To Fit, Perfect Strength
• Pressure: 0-5000psi

When selecting a pressure gauge, it is important to consider the following factors to ensure safety and accuracy: 1. Pressure fluid composition 2. Pressure fluid temperature  3. Ambient conditions 4. Pressure range 5. Conditions affecting wear of the system  6. Method of mounting  7. Required accuracy 1. Pressure fluid composition Since the sensing element of a pressure gauge may be exposed directly to the measured medium, consider the characteristics of this medium. It may be corrosive, it may solidify at various temperatures or it may contain solids that will leave deposits inside the sensing element. For pressure fluids that will not solidify under normal conditions or leave deposits, a Bourdon tube gauge is acceptable. Otherwise a Sealgauge or diaphragm seal should be used. A chemical compatibility chart follows this section to aid in the selection of the proper sensing element material. 2. Pressure fluid temperature Steam and other hot media may raise the temperature of the gauge components above safe working limits of the sealed joints. In these cases it is recommended that a siphon, cooling tower or diaphragm seal be used in conjunction with the pressure gauge. 3. Ambient conditions The normal ambient temperature range for WIKA pressure gauges is -40o F to +140o F (-40o C to +60o C) for dry or silicone-filled gauges and -4o F to +140o F (-20o C to +60o C) for glycerine-filled gauges. The error caused by temperature changes is +0.3% or -0.3% per 18o F rise or fall, respectively. The reference temperature is 70o F (20o C). The correction is for the temperature of the gauge, not the temperature of the measured medium. Remote gauge mounting using a diaphragm seal and capillary line is one alternative for applications involving extreme ambient temperature. Moisture and weather effects must also be considered. Liquid-filled gauges prevent condensation build up. For outdoor use, stainless steel, brass or plastic cased gauges are recommended.  4. Pressure range A gauge range of twice the working pressure is generally selected. The working pressure in all cases should be limited to 75% of the gauge range. Where alternating pressure and pulsation are encountered, working pressure should be limited to 2/3 of the gauge range. 5. Conditions affecting wear of the system In applications involving severe pressure fluctuation or pulsation, the use of restrictors and/or snubbers is recommended. In addition, liquid-filled gauges increase the service life of gauges in these conditions. WIKA liquidfilled gauges are generally filled with glycerine. Silicone for larger temperature extremes and Halocarbon® for use with oxidizing agents such as chlorine, oxygen and hydrogen peroxide are also available. 6. Method of mounting Radial (LM) and back (CBM or LBM) connections are available for most WIKA gauges. WIKA stocks gauges with standard NPT threaded connections. Other types such as metric threads, straight threads, hose barbs and special fittings are available as a special order. Pressure gauges should be mounted in the upright position. For applications where the gauge is mounted side ways, horizontally or upside down, contact WIKA Customer Service for gauge type compatibility. 7. Required accuracy WIKA stocks gauges with accuracies from ± 3/2/3% to ±0.1% of span (ASME Grade B to Grade 4A). To ensure safe and accurate gauge selection, you must take all of the above factors into consideration.

 Based in Hyderabad, Telangana we are one of the most-reliable manufacturer and supplier of Level Indicator. We offer Level Indicators in wide range of specifications and models to satisfy the client requirement. Manufactured using raw materials sourced from best-in-industry vendors, our Level Indicators come with an internationally acclaimed quality. These Level Indicators have applications in Oil filled Power Transformers and Oil filled Tanks.

Selecting a pressure gauge when selecting a pressure gauge, it is important to consider the following factors to ensure safety and accuracy: 1. Pressure fluid composition 2. Pressure fluid temperature 3. Ambient conditions 4. Pressure range 5. Conditions affecting wear of the system 6. Method of mounting 7. Required accuracy

• Size: 2inch, 4inch, 6inch, 8inch
• Type: Vacuum Gauge
• Material: Brass, Stainless Steel
• Diameter: 20-40mm, 40-60mm, 60-80mm, 80-100mm
• Shape: Round
• Application: Vacuum Measuring
• Color: Black, Grey, Silver, Yellow
• Display Type: Analog
• Pressure: 0-5000psi, 10000-15000psi, 5000-10000psi
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction
• Connection: Bottom Connection
• Liquid Pressure: 0-500bar, 1000-1500bar
• Gas Pressure: 0-500kg

• ACCURACY: ± 1 PSI
• MEASURING RANGE: 0— 150 PSI
• DISPLAY (1 INCH): SUPER BRIGHT LED
• DIMENSIONS IN MM: 210(H) X 164(W) X 65(D)

Protech introduces the new space age electronic tyre pressure gouge for the first time in India with technical know how from U.S A In the current automobile market most of the automobiles are fitted with state of the art suspension system To get excellent performance of the automobile accurate tyre pressure is mandatory. Protech's electronic tyre pressure gauge provides the required accuracy as suggested by the tyre manufacturersProtech's electronic tyre pressure gauge once installed at your centre, you need not frequently calibrate or replace it as is the case with traditional analog gauges. Protech's electronic gauge pays for itself in the long run because analog gauges require frequent replacements and are unreliable Even after measuring the tyre pressure in more than 5 lakhs tyres, the performance of Protech's electronic tyre pressure gauge remains the same. It is absolutely maintenance free and weather resistant. APPLICATIONS AUTOMOBILE SHOW ROOMS WHEEL ALIGNMENT CENTERS PETROL PUMPS TRANSPORT CORPORATIONS AUTOMOBILE SERVICE CENTERS TYRE SHOW ROOMS, ETC.,

Glass Knobs, Canopy Fittings, fixing bolts, Gates, Shower Fitting, Signage

Force Gauges, Barometer, Clamp Meter, Dew Point Meter, Digital Hygrometer

Analog Gauge, Air hydraulic pump, Economy Toe Jack, Hydraulic Spreader

Glass Drawer Knobs, plywood products, hardware fittings, drawer knobs

Digital Water Level Indicator, Digital Water Level Alaram, Water Level Alarm

Water Level Indicator, Water Level Controller, water level sensors

Gauge Block Set, Straight Edge, Gear Tooth Vernier Calipers, Magnetic Stand