Back Back
Seed Testing Moisture Meter
5,250 Per Piece
1 Piece (MOQ)
Hygrometer
8,000 - 10,400 Per Unit
Best Deals from Moisture Instruments
Rapid Moisture Meter
9,550 Per Piece
10 Piece (MOQ)
Portable Dew Point Meter
100,000 - 500,000 Per 1L
1 Box (MOQ)
Temperature Humidity Meter
2,500 - 3,500 Per piece
Even in energy sector when calculating peak load it is crucial to estimate the effect of climate conditions. Many peak load forecasting approaches are based on temperature, relative humidity and wind velocity etc. Humidity also influences plant diseases, especially fungi and molds that grow and spread rapidly when humidity is high.IRH 01 is a capacitive humidity sensor with a polymer dielectric which absorbs or release water proportional to relative humidity which changes the capacitance of the capacitor which can be measured with a electronic circuit.The IRH01 is very compact as ADC, signal amplifier, calibration data memory is all on a single chip. The filter cap protects the sensor for water dust and other contaminations. Sensor is protected by a solar radiation shield which protects the sensor from radiated and reflected heat also.IRH01 is directly compatible with IDL-M and IDL-A. Sensor is compatible with davis Vantage pro series weather stations also.Product HighlightsTemperature, HumidityCompact DesignPowder Coated Anodized Aluminum ConstructionDigital and Analog OutputsEasy installation Temperature Sensor General Specification Sensor: SHT11 by Sensiron Temperature Measurement Range: -40°C to +60°C Temperature Measurement Resolution: 0.01 Temperature Measurement Accuracy: ±0.5°C Temperature Accuracy: Operating Temperature: -40 °C to +123°C Storage Temperature: -40°C to +80°C Probe Length: 7.1 cm (2.8 in.) Probe Body Diameter: 1.2 cm (0.47 in.) Filter: 0.2 Μ Teflon membrane Filter Diameter: 1.2 cm (0.47 in.) Housing Material: Rediation Sheild of UV Resistant ABS plastic,Powder Coated Mouunting Structure Power Consumption: 0.5 mA Supply Voltage: 2.4V to 5.5V VDC Settling Time after power is switched on: 30 Sec with Teflon Filter and 1 Sec wth Nylon Filter Relative Humidity Sensor Sensor: SHT11 by Sensiron Relative Humidity Measurement Range: 0 to 98% non-condensing RH Output Signal Range: 0 to 1.0 VDC Accuracy at 25°C:±3% RH (0 to 90% Relative Humidity)±5% RH (90 to 98% Relative Humidity)
Portable Dew Point Meter
Get Price Quote
Portable Dew Point Meter is designed to measure the performance of drying systems for air, nitrogen and other compressed gases. This portable dew point meter Model is ideal for monitoring medical, commercial and industrial applications including plastics resin dryers, breathing air, pneumatic tools, instrument air, and sprayingcoating applications. - See more at: http:www.vasthi.comdew-point-meter#sthash.K0X26RiC.dpuf
DEW POINT TRANSMITTER CONTROL UNIT
Get Price Quote
Dew Point Transmitter Control Unit Moisture Analyzer Model VMA – 888 is heavy duty, industrial hygrometer systems for measurement of high pressure, dew point meter transmitter process gases and vaporized liquids on natural gas platforms and terminals, petrochemical plants and industrial gas manufacturing facilities. Vasthi moisture sensing technologies with sample conditioning system design engineering capabilities to provide a reliable and easy to operate, multi-channel on-line instrument for both flammable and non-flammable gases SPECIAL FUTURES OF DEW POINT TRANSMITTER CONTROL UNIT : Microprocessor based portable battery operated instrument. Digital Graphical Display Measuring range ‐60° to +30° C dewpoint & other ranges also available on client requirement. Samples compressed air up to 12 Kg/cm. Pressure and up to 95°C temperature can measure directly. Quick disconnect fitting, desiccant test. Handy and light weight. Inbuilt thin film water vapor sensor. Optional RS ‐ 232 computer interface & data logger. DEW POINT TRANSMITTER CONTROL UNIT ADDITIONAL FEATURES Computer Interface: RS‐232 Data Logger: 1 Megabyte, Non‐Volatile Memory In‐ built Pump: For Auto Suction DEW POINT TRANSMITTER CONTROL UNIT SPECIFICATIONS : Sensor Principle : Capacitive Thin Film Polymer Dew Point Range : ‐ 80 TO +30°C Relative Humidity : 0.01 to 99.99 %RH Temp. : 0.01 to 99.99 ° C Moisture : 10 to 23000 PPM Accuracy : +/‐1°C for 0 to +30 °C: +/‐1.5°C for 0 to ‐40 °C: +/‐2 °C for ‐40 to ‐80 °C Maximum Sample Temp : 90 °C (For higher temperature use, Optional cooling coil is available) Maximum Pressure : 12kg/cm2 Response Time : 10 Seconds for 63% step change Display : 128 X 64 Pixels Graphical LCD Power : Single cell lithium ion Battery with In‐built charge control Inlet Sample Port : 1/4″ OD Tubing Weight : 445 grams (approx.) Dimensions : Refer to GA Drawing Degree of Protection : IP ‐ 65 APPLICATIONS : Petrochemicals Natural Gas Utilities SF6 etc. Industrial Driers Compressed Air Pharmaceuticals Medical Nitrogen gas at the time of filling in the Transformers Alternative fuels Transportation Military Aerospace Environmental Semiconductor Ozone Generation Heat Treating Freeze Drying DEW POINT TRANSMITTER CONTROL UNIT SERVICES : Evaluation Custom Designs Calibration & Certification Repair Plant visiting Sampling Systems
Hygrometer Dew Point Meter
Get Price Quote
Lutron HD-3008 gives exceptional capacities and highlights Large LCD with two display, simple readout Heavy obligation and minimal housing case.easy readout. It is intended for simple do and records maximum and minimum readings with review auto shut off spares battery life Data hold work for solidifying the desired value on display.Features:• Large LCD with two display, easy readout.• Heavy duty & compact housing case, designed for easy carry out & operation.• Records Maximum and Minimum readings with Recall.• Auto shut off saves battery life.• Data hold function for freezing the desired value on display.• RS 232 PC serial interface.• Show the humidity & temperature values on the LCD display at same time.• °C, °F conversion is selected by push button on front panel easily.• Built-in low battery indicator.• Humidity probe built-in thermistor sensor for temperature measurement, fast response time.• Wide humidity & temp. measuring range.• Separate humidity & temp. probe, easy operation. & remote measurement.
Grain Moisture Meter
31,500 Per UNIT
1 UNIT (MOQ)
Continuous Air Monitor
Get Price Quote
Continuous Air Monitor, Type: AM732A manufactured by Nucleonix Systems, designed using state-of-art electronics is primarily used for monitoring Alpha activity present in the form of suspended particulate in air. It is very much essential to monitor the quality of air in & around Radiochemical plants, reprocessing plants and other similar facilities. It essentially has an air suction system comprising of a suction pump, rotometers to measure air flow rate, Alpha suction chamber. This system has Alpha air-sampler detector assembly consists of a filter holder 60mm dia, a suction chamber with air inlet and outlet & detector housing fabricated with stainless steel. Alpha Detector consists of ZnS (Ag) deposited on loose mylar support of 50mm dia coupled to matched PMT with Pre-amplifier. Detector Efficiency achieved is of the order of 25% for Plutonium alpha particles over the entire window area. Collection efficiency better than 97% is achieved with this design. Suction chamber design facilitates the user to easily replace the filter paper(s) periodically as per the requirement.
Dew Point Meter
85,000 - 100,000 Per Piece
Dew Point Meter
500,000 Per Box
Vasthi Instruments are global leaders in manufacturing of Gas Analyzer, Water Analyzer, Voc Monitor,Gas Detectors, Dew Point Meter,Flue gas analyzer,Dust Monitor,Stack Gas Analyzers,gas detector,Mercury Gas Analyser,Hydrogen Gas,wireless gas transmitter,Hydrogen gas analyzer,AAQMS, CAAQMS and have been supplying instruments to customers worldwide.
Online Dew Point Meter
6,000 - 6,500 Per -
How do you determine the dew point temperature and how to measure it? The dew point is the temperature at which the air needs to be cooled (at constant pressure) to achieve 100% relative humidity (RH). A dew point meter is an ideal device used to determine the accurate dew point temperature of any compressed air or gas.
Rapid Moisture Meter
Get Price Quote
The unit consists of a pressure vessel with clamp for sealing cap, rubber sealing gasket, pressure gauge calibrated in percentage moisture content 0-25% X 1% on the wet weight basis, a counter poised balance for weighing sample, a scoop for measuring carbide reagent, a bottle of reagent, one cleaning brush and a set of 4 steel balls(3 OF 12.5MM AND 1 OF 25MM DIA) for thorough mixing. Complete in highly polished wooden carrying case with handle. AS PER IS : 2720(PART II)
Digital Humidity Meter
500 Per Number
1 Number (MOQ)
Bt Radio Frequency Moisture Tester
Get Price Quote
We are offering bt radio frequency moisture tester. The rfm – 1000bt is a simple and reliable radio frequency bench top moisture tester. The tester generates a radio frequency fringe field at less then 10mhz. This field penetrates a sample chamber that holds the product being measured for moisture content. Rfm – 1000bt conducts non destructive testing and is unaffected by sample color. user friendly operation non destructive testing varied applications
Portable Dew Point Meter
Get Price Quote
Portable Dew point meter - The world renowned model HP 22 from Rotronic ,Switzerland and a high accurate ( +- 0.8% rH and 0.1 Deg C ) Dew-point sensor (HC2-IE1M02) combines a great portable dew-point meter instruments which works upto 100 bar line pressure. It’s a multi-utility instrument.
Dewpoint Transmitter
Get Price Quote
We are offering dewpoint transmitter. The ee35 series is designed for accurate measurement of dew point td and frost point tf in compressed air and in harsh industrial environments. working range td : -60….600 c (-76…1400 f) working range t : 0….600 c (32…1400 f) accuracy td : -+0.20 c (-+0.360 f) accuracy t : -+0.20 c (-+0.360 f) output : 0- 5v 0 – 10v or 0 – 20 ma 4 -20 ma configurable by software supply voltage: 12.30v ac 8……35v dc industrial processes monitoring of air pressure pipelines warehouses drying processes paper industries chemical industries
Portable Indoor Air Quality Monitor
35,600 Per Piece
The CP11 handheld instrument evaluates the quality of air with a combined measurement of CO2, humidity and temperature. A high concentration of carbon dioxide can develop quickly when closed areas with deficient ventilation are filled with people. Carbon dioxide (CO2) is a colorless and odorless gas that exists in the earth’s atmosphere and which is dangerous in high concentrations. Features: Calculates dew point and wet bulb temperature Automatic or manual data logging Easy field calibration by simple connection to a known reference Auto power OFF function
Flameproof Humidity and Temperature Meter
Get Price Quote
Item Code:CR120-FLP Available with remote RH+Temperature Sensor in FLP Enclosure 21 CFR Part 11 compliant Display RH, Differential Pressure & Temperature High Accuracy Input Compatible with most RH Sensors, PT100 & 0-10V & 4-20mA Transmitters Hi & Lo Alarm Annunciation for each channel Software calibration with record 24 V DC operation SCADA interface through RS 485 MODBUS Communication Programmable Units: %RH, Dew Point, C, F Pa and mmWC OPTIONS: Built in Synchronised Clock, Max/Min Record with Time Stamp
Digital Moisture Miter
13,800 Per Piece
Halogen Moisture Balance
Get Price Quote
STANDARD FEATURES * Easy to read VFD Display * Based on E.M.F.C. Technology * Halogen Heating System * Temperature Range upto 200oC * Standard RS 232 C Interface * The mode for testing Automatic, Timing, Manual.
Portable Dew Point Meter
Get Price Quote
Online Dew Point Meter
70,000 - 100,000 Per Piece
The Online Dew point meter can be perceived as the temperature at which the water vapor content in a gas arrives at a soaked state. It is one of the approaches to communicate the outright stickiness of a gas. It may very well be seen that the dew point temperature is a unit system for measuring the moisture content of a gas. The dew point meter is an instrument that measures the absolute moisture content of gas dependent on this unit system.
SOIL MOISTURE SENSOR MODULE
Get Price Quote
The sensor measures the dielectric constant of the soil in order to find its volumetric water content (VWC). It obtains volumetric water content by measuring the dielectric constant of the media through the utilization of capacitancefrequency domain technology. Since the dielectric constant of water is much higher than that of air or soil minerals, the dielectric constant of the soil is a sensitive measure of volumetric water content. The sensor has a low power requirement and very high resolution. This gives the ability to make many measurements (i.e. hourly) over a long period of time with minimal battery usage. In addition, the sensors incorporate a high frequency oscillation, which allows the sensor to accurately measure soil moisture in any soil with minimal salinity and textural effects. An on-board voltage regulator allows factory calibrations to be used with any excitation voltage above 3V. Applications: Irrigation scheduling Vadose zone monitoring Plant-soil-water interaction studies
Moisture Balance
30,000 Per Piece
Environmental Particulate Air Monitor
Get Price Quote
Applications Quantifying off-site particulate migration Surveying for PM2.5 and PM10 Monitoring dust generation during drilling and excavation Evaluating dust suppression and engineering controls Locating and identifying "hot spots" Emergency response and fugitive emissions compliance Determining level of respiratory protection Survey of workplace for OSHA/EPA compliance Evaluating worker exposure to airborne contaminants Dust collector/ventilation system checks Monitoring lung-damaging particles in factories and buildings Complementary instrument for all EPA and OSHA personal and ambient particulate air sampling procedures Description The portable HAZ-DUST EPAM-5000 particulate monitor is ideal for ambient, environmental, and indoor air quality investigations. The highly sensitive EPAM-5000 uses light scattering to measure particle concentration and provide real-time determinations and data recordings of airborne particle concentration in mg/m3. Interchangeable size-selective impactors allow PM10, PM2.5, PM1.0, or TSP monitoring. The unique aerodynamic particle sizing and optional 47-mm in-line filter holder loaded with appropriate filter can provide concurrent gravimetric sampling. Download and store sampling data on a PC for analysis and reporting using included DustComm Pro Software. Fast, easy setup Highly sensitive and accurate 0.001 to 20.0 mg/m3 for particles 0.1 to 100 µm Optional 0.01 to 200 mg/m3 and 0.10 to 2000 mg/m3 ranges available (specify when ordering) Accuracy is ± 10% to filter gravimetric SAE fine test dust Internal air sample pump for 1 to 4 L/min flows* Unique aerodynamic particle-sizing real-time sensor Use optional EPA FRM-style filter holder for gravimetric reference High correlation to EPA PM10 methods and TEOM® Ideal for saturation sampling Up to 24-hour operation on one battery charge Continuous monitoring with AC adapter Immediate display and data storage Audible alarm siren Easy-to-use DustComm Pro data analysis and reporting software included Portable and compact 14 x 6 x 10 inches ( 35.6 x 15.2 x 25.4 cm) 10 pounds (4.5 kg) Interchangeable size-selective impactors for EPA parameters PM10, PM2.5, PM1.0, and TSP * Pump has a variable flow rate designed for use at 4.0 L/min to achieve proper size selection.Features: User-programmable start and stop time for unattended data collection On-screen user-selectable sampling parameters retained in memory for quick, easy deployment when sampling parameters remain unchanged Wireless data transmission option transmits data up to 5 miles Improved DustComm Pro PC Software provides: Greater flexibility in graphical reports — create and label in new "draw and paint" program Basic trend analysis Live data feed and logging from wireless data transmission Interfaces with the VDM-7500 wireless video exposure dust monitoring system Advantages: One compact instrument provides real-time data and gravimetric samples for analysis Immediate display and datalogging of particulate concentrations Data provides a graphic profile of PM sample Added-value survey sampler for saturation monitoring studies Allows immediate and permanent documentation Reduces the number of manual gravimetric test as well as labor and analysis costs Easy setup and operation — ready in 15 seconds
air quality monitoring system
100,000 Per Box
vasthi instruments are global leaders in manufacturing of so2 analyzer,gas analyzers, gas detectors,ozone analyzers, online calibrator for calibration,dew point analyzer,particulate monitors, stack gas analyzers and have been supplying instruments to customers worldwide, our multidisciplinary team of scientists, physicians, engineers, and regulatory consultants with decades of global experience brings you the quintessential mechanism that provides complete safety accuracy and durability. Vasthi engineers was formed with visionary thinking and innovative ideas resulting in innovative products and solutions. We enhance our product quality by the continuous process of research and development. We have wide range of models to suite various site conditions and processes.
Vasthi Dew Point Meter
Get Price Quote
Portable dew point meter is designed to measure the performance of drying systems for air, nitrogen and other compressed gases. This dew point meter model is ideal for monitoring medical, commercial and industrial applications including plastics resin dryers, breathing air, pneumatic tools, instrument air, and sprayingcoating applications.
Dew Point Meter
Get Price Quote
Barometer, Clamp Meter, Digital Hygrometer, emf tester, Flue Gas Analyzer
