Moisture Meter Dealers in Hyderabad

• Country of Origin: India
• Sensor technology: Capacitive Thin Film Polymer
• Measuring Ranges: (-40 +30), (-60 +30), (- 80 +30) & (-100 +30)
• Monitoring Parameter: Dew Point, RH, Temperature & Moisture
• Resolution: 0.1 Deg, C
• Accuracy: +/-2 Deg. C
• Linearity: +/-2 Deg. C
• Display: 2
• Operating power: Battery Operated
• IP protection: IP 65
• Battery Charger: USB Type
• Operating Pressure: up to 20 bar pressure
• Recommended Flow Rate: 2 LPM
• Temperature Measuring Range: 0.00 to 99.999 Deg .C
• Relative Humidity Measuring Range: 0.00 to 99.99 %
• Moisture Measuringe Range: 0- 23000 PPM

Vasthi Instruments are global leaders in manufacturing of Gas Analyzer, Water Analyzer, Voc Monitor,Gas Detectors, Dew Point Meter,Flue gas analyzer,Dust Monitor,Stack Gas Analyzers,gas detector,Mercury Gas Analyser,Hydrogen Gas,wireless gas transmitter,Hydrogen gas analyzer,AAQMS, CAAQMS and have been supplying instruments to customers worldwide.  

• Warranty: 1 Year
• Display Type: LCD
• Weight: 2
• Power: 230 V
• Country of Origin: Made in India
• Usage/Application: Laboratory
• Operating Temperature: 0-40 Degree Celsius
• Material: SS

• Feature: Easy To Use, Four Times Stronger, Water Proof
• Frequency: 60 - 70 Hz
• Pan Size: 90mm
• Temp Sensor: PT-100
• Heat Source: Halogen lamp
• Usage: Industrial

Air-sampler detector assembly consists of a filter holder 60mm dia, a suction chamber with air inlet and outlet & detector housing fabricated with stainless steel .Alpha-Beta detector consists of ZnS(Ag) scintillator deposited on Plastic scintillator of 50mm diameter, coupled to matched PMT with Pre-amplifier. Detector efficiency achieved for Alpha is about 25% with Am241 and for Beta it is about 25% with Sr90 Yt90 and Collection efficiency obtained is better than 97% is achieved with this design. Suction chambers design facilitates the user to easily replace the filter paper periodically as per the requirement. Electronic module: This will indicate, the air sample activity deposited on the filter paper in terms of CPM CPS Bq .Other built-in electronic sub-systems include HV module, SMPS, controller card, EMIEMC filters, current loop circuit, relay & relay driver circuit, etc .Front panel has TFT display with touch screen, alarms indication on TFT display, audio buzzer, etc. Enclosure has connectors for connecting to Scintillation probe, 17 pin IO connector, test sockets, Ethernet connector, A.C. mains switch, fuse holder etc. This module will provide alarm annunciation both visual and aural when the activity exceeds preset level. This system provides current loop output; relay output on 17 pin IO connector. Ethernet port facilitates connection to NXG_RadGrid SCADA for data communication for visualization of CAM parameters.

Dew Point Transmitter Control Unit Moisture Analyzer Model VMA – 888 is heavy duty, industrial hygrometer systems for measurement of high pressure, dew point meter transmitter process gases and vaporized liquids on natural gas platforms and terminals, petrochemical plants and industrial gas manufacturing facilities. Vasthi moisture sensing technologies with sample conditioning system design engineering capabilities to provide a reliable and easy to operate, multi-channel on-line instrument for both flammable and non-flammable gases SPECIAL FUTURES OF DEW POINT TRANSMITTER CONTROL UNIT : Microprocessor based portable battery operated instrument. Digital Graphical Display Measuring range ‐60° to +30° C dewpoint & other ranges also available on client requirement. Samples compressed air up to 12 Kg/cm. Pressure and up to 95°C temperature can measure directly. Quick disconnect fitting, desiccant test. Handy and light weight. Inbuilt thin film water vapor sensor. Optional RS ‐ 232 computer interface & data logger. DEW POINT TRANSMITTER CONTROL UNIT ADDITIONAL FEATURES Computer Interface: RS‐232 Data Logger: 1 Megabyte, Non‐Volatile Memory In‐ built Pump: For Auto Suction DEW POINT TRANSMITTER CONTROL UNIT SPECIFICATIONS : Sensor Principle : Capacitive Thin Film Polymer Dew Point Range : ‐ 80 TO +30°C Relative Humidity : 0.01 to 99.99 %RH Temp. : 0.01 to 99.99 ° C Moisture : 10 to 23000 PPM Accuracy : +/‐1°C for 0 to +30 °C: +/‐1.5°C for 0 to ‐40 °C: +/‐2 °C for ‐40 to ‐80 °C Maximum Sample Temp : 90 °C (For higher temperature use, Optional cooling coil is available) Maximum Pressure : 12kg/cm2 Response Time : 10 Seconds for 63% step change Display : 128 X 64 Pixels Graphical LCD Power : Single cell lithium ion Battery with In‐built charge control Inlet Sample Port : 1/4″ OD Tubing Weight : 445 grams (approx.) Dimensions : Refer to GA Drawing Degree of Protection : IP ‐ 65 APPLICATIONS : Petrochemicals Natural Gas Utilities SF6 etc. Industrial Driers Compressed Air Pharmaceuticals Medical Nitrogen gas at the time of filling in the Transformers Alternative fuels Transportation Military Aerospace Environmental Semiconductor Ozone Generation Heat Treating Freeze Drying DEW POINT TRANSMITTER CONTROL UNIT SERVICES :   Evaluation Custom Designs Calibration & Certification Repair Plant visiting Sampling Systems

• Application: Agriculture, Meteorology
• Weight: 230
• Country of Origin: India
• Display: No
• Brand: AETHER Techno Solutions
• Material: Plastic
• Type: PT100
• Color: Black/White
• Warranty: 1 year

Even in energy sector when calculating peak load it is crucial to estimate the effect of climate conditions. Many peak load forecasting approaches are based on temperature, relative humidity and wind velocity etc. Humidity also influences plant diseases, especially fungi and molds that grow and spread rapidly when humidity is high.IRH 01 is a capacitive humidity sensor with a polymer dielectric which absorbs or release water proportional to relative humidity which changes the capacitance of the capacitor which can be measured with a electronic circuit.The IRH01 is very compact as ADC, signal amplifier, calibration data memory is all on a single chip. The filter cap protects the sensor for water dust and other contaminations. Sensor is protected by a solar radiation shield which protects the sensor from radiated and reflected heat also.IRH01 is directly compatible with IDL-M and IDL-A. Sensor is compatible with davis Vantage pro series weather stations also.Product HighlightsTemperature, HumidityCompact DesignPowder Coated Anodized Aluminum ConstructionDigital and Analog OutputsEasy installation     Temperature Sensor General Specification  Sensor: SHT11 by Sensiron  Temperature Measurement Range: -40°C to +60°C  Temperature Measurement Resolution: 0.01  Temperature Measurement Accuracy: ±0.5°C  Temperature Accuracy:  Operating Temperature: -40 °C to +123°C  Storage Temperature: -40°C to +80°C  Probe Length: 7.1 cm (2.8 in.)  Probe Body Diameter: 1.2 cm (0.47 in.)  Filter: 0.2 Μ Teflon membrane  Filter Diameter: 1.2 cm (0.47 in.)  Housing Material: Rediation Sheild of UV Resistant ABS plastic,Powder Coated Mouunting Structure  Power Consumption: 0.5 mA  Supply Voltage: 2.4V to 5.5V VDC  Settling Time after power is switched on: 30 Sec with Teflon Filter and 1 Sec wth Nylon Filter Relative Humidity Sensor  Sensor: SHT11 by Sensiron  Relative Humidity Measurement Range: 0 to 98% non-condensing  RH Output Signal Range: 0 to 1.0 VDC  Accuracy at 25°C:±3% RH (0 to 90% Relative Humidity)±5% RH (90 to 98% Relative Humidity)  

• Brand Name: VASTHI
• Warranty: 1 Year
• Model Name/Number: VODM-8010
• Usage/Application: Industrial

• Type: Online Dew Point Meter

How do you determine the dew point temperature and how to measure it? The dew point is the temperature at which the air needs to be cooled (at constant pressure) to achieve 100% relative humidity (RH). A dew point meter is an ideal device used to determine the accurate dew point temperature of any compressed air or gas.

The measured values for dew point, ice point or ppm volume focus are accessible on a simple 4-20 mA and a computerized Modbus RTU output. Incorporation into the measurement task is improved by the conservative structure and the outstandingly strong hardened steel housing.With a discretionary Modbus to USB converter and the free EEPCS setup programming, the client can modify the transmitter, set the Modbus parameters and change the scaling of theanalog output.Features:* Measurement range -60...60 °C Td (-76...140 °F Td).* E+E autocalibration Measurement accuracy ±2 °C (±3.6 °F).* Modbus RTU and 4..20 mA output.* Sturdy and compact stainless steel housing.

• Material: Plastic
• Shape: Square
• Power: 24VDC Or 220VAC
• Driven Type: Battery
• Certificate: ISO 9001:2008 Certified
• Country of Origin: India
• Display: Digital
• Warrenty: 1 Year
• Operating Temperature: 230 VAC , 50 Hz
• Accuracy: +/- 2 %
• Analog Output: 4-20 MA/ 0-20V

We are offering ee385teha07 - moisture in oil meter. T – transmitter e- upto 20 bar ha07 – 12” npt thread with ppm output duel output – ppm & temperature pressure range – upto 20 bar temperature range - -40 t0 125 deg c accuracy - +- 0.2 deg c supply voltage : 21 – 28 vdc housing protection class : al si 9 cu 3 ip65 electrical connection m12 plug connector working temperature range probe: -40.125°c electronic: -40...80°c storage temperature range : -40...80°c electromagnetic compatibility according to : en 61326-1 en61326-2-3 ices-003 classb , industrial environment fcc part15 classb

Portable Dew point meter - The world renowned model HP 22 from Rotronic ,Switzerland and a high accurate ( +- 0.8% rH and 0.1 Deg C ) Dew-point sensor (HC2-IE1M02) combines a great portable dew-point meter instruments which works upto 100 bar line pressure. It’s a multi-utility instrument.

Item Code:CR120-FLP Available with remote RH+Temperature Sensor in FLP Enclosure 21 CFR Part 11 compliant Display RH, Differential Pressure & Temperature High Accuracy Input Compatible with most RH Sensors, PT100 & 0-10V & 4-20mA Transmitters Hi & Lo Alarm Annunciation for each channel Software calibration with record 24 V DC operation SCADA interface through RS 485 MODBUS Communication Programmable Units: %RH, Dew Point, C, F Pa and mmWC OPTIONS: Built in Synchronised Clock, Max/Min Record with Time Stamp

• Application: Office
• Power: Electric
• Brand Name: shimadzu
• Warranty: 1 Year
• Color: multicolor
• Deal In: New only
•  :  

Applications Quantifying off-site particulate migration Surveying for PM2.5 and PM10 Monitoring dust generation during drilling and excavation Evaluating dust suppression and engineering controls Locating and identifying "hot spots" Emergency response and fugitive emissions compliance Determining level of respiratory protection Survey of workplace for OSHA/EPA compliance Evaluating worker exposure to airborne contaminants Dust collector/ventilation system checks Monitoring lung-damaging particles in factories and buildings Complementary instrument for all EPA and OSHA personal and ambient particulate air sampling procedures Description The portable HAZ-DUST EPAM-5000 particulate monitor is ideal for ambient, environmental, and indoor air quality investigations. The highly sensitive EPAM-5000 uses light scattering to measure particle concentration and provide real-time determinations and data recordings of airborne particle concentration in mg/m3. Interchangeable size-selective impactors allow PM10, PM2.5, PM1.0, or TSP monitoring. The unique aerodynamic particle sizing and optional 47-mm in-line filter holder loaded with appropriate filter can provide concurrent gravimetric sampling. Download and store sampling data on a PC for analysis and reporting using included DustComm Pro Software. Fast, easy setup Highly sensitive and accurate 0.001 to 20.0 mg/m3 for particles 0.1 to 100 µm Optional 0.01 to 200 mg/m3 and 0.10 to 2000 mg/m3 ranges available (specify when ordering) Accuracy is ± 10% to filter gravimetric SAE fine test dust Internal air sample pump for 1 to 4 L/min flows* Unique aerodynamic particle-sizing real-time sensor Use optional EPA FRM-style filter holder for gravimetric reference High correlation to EPA PM10 methods and TEOM® Ideal for saturation sampling Up to 24-hour operation on one battery charge Continuous monitoring with AC adapter Immediate display and data storage Audible alarm siren Easy-to-use DustComm Pro data analysis and reporting software included Portable and compact 14 x 6 x 10 inches ( 35.6 x 15.2 x 25.4 cm) 10 pounds (4.5 kg) Interchangeable size-selective impactors for EPA parameters PM10, PM2.5, PM1.0, and TSP * Pump has a variable flow rate designed for use at 4.0 L/min to achieve proper size selection.Features: User-programmable start and stop time for unattended data collection On-screen user-selectable sampling parameters retained in memory for quick, easy deployment when sampling parameters remain unchanged Wireless data transmission option transmits data up to 5 miles Improved DustComm Pro PC Software provides: Greater flexibility in graphical reports — create and label in new "draw and paint" program Basic trend analysis Live data feed and logging from wireless data transmission Interfaces with the VDM-7500 wireless video exposure dust monitoring system  Advantages: One compact instrument provides real-time data and gravimetric samples for analysis Immediate display and datalogging of particulate concentrations Data provides a graphic profile of PM sample Added-value survey sampler for saturation monitoring studies Allows immediate and permanent documentation Reduces the number of manual gravimetric test as well as labor and analysis costs Easy setup and operation — ready in 15 seconds  

• Brand Name: Vasthi Instruments
• Voltage: 220V
• Power: 12 To 24 VDC Or VAC
• Driven Type: Battery
• Certificate: CE Certified
• Country of Origin: India
• Display: Digital
• Warrenty: 1 Year

 The  Online Dew point meter can be perceived as the temperature at which the water vapor content in a gas arrives at a soaked state. It is one of the approaches to communicate the outright stickiness of a gas. It may very well be seen that the dew point temperature is a unit system for measuring the moisture content of a gas. The dew point meter is an instrument that measures the absolute moisture content of gas dependent on this unit system.

• Range: 0 to 10,000 ppm display,0 to 4000 ppm voltage output
• Accuracy: ±50 ppm or 5% of reading, whichever is greater

The Telaire 7000 Series hand held indoor air quality monitors feature our patented absorption infrared technology. Accurately measures CO2 and temperature while calculating real-time ventilation rates.The Telaire 7000 Series also offers data logging and RH data gathering capabilities when purchased with available accessories. Product kits include a power adapter, however, the unit may be operated up to 80 hours on 4 AA batteries (not included).

STANDARD FEATURES * Easy to read VFD Display * Based on E.M.F.C. Technology * Halogen Heating System * Temperature Range upto 200oC * Standard RS 232 C Interface * The mode for testing Automatic, Timing, Manual.