Optiwave Photonics Limited Mallapur, Hyderabad, Telangana

The variable optical attenuators are available as hand held units for ease of operation and handy for field tests. Optiwaves set of variable attenuator along with optical light source and optical power meter forms a very good combination of test & measurement instruments required for installation & maintenance of optical fiber cables. Features Alpha-numeric display with backlight or Organic color graphical display. Keypad with soft touch keys for smoother operation and longer life. Can be operated with internal battery or ac power supply. The battery can be charged with adapter connected to instrument or with USB port. Power consumption is low thus ensuring long battery life. Operating over a wide attenuation range of 60 dB. Auto Off of the unit for power saving and long battery life. PC interface via RS232 for control & monitoring. A rubber holster is provided to the instruments for additional protection against falls. ApplicationsGain control applicationsOptical systems & device evaluationOFC installation & maintenanceOEM applicationsR&D applications

One of the most important equipments required in any industry or laboratory involved in handling micro-objects is this Vacuum Pickup Tool. The equipment has been designed with an imported vacuum release valve for better control and reliability. The features of this instrument are at par with the international standards at a reduced price. Features   Simple and compact design, easy to operate and economical in cost.   Pen style gripper for easy handling.   ESD Silicone hose.   Customized Pickup tools.   Low noisy.   Built-in vacuum release valve allows precise component placement. ApplicationsESD safe handlingManual pickup and placement of micron chips or components.Handling small electronic components and optical components.

Optical Transmitter(TX) will convert the RF signals into Optical Signal.The optical Transmitter works on the principle of direct modulation. A typical link consists of an optical transmitter that receives the RF signal, transmits it over a single mode fiber to an optical receiver and reconverts the optical signal to RF. This Radio over Fiber Modules is suitable for Telecommunications, Antenna Remoting, Optical Delay lines & Radar Applications. These modules can be used as Optical Distributed Systems in Radar application. By using these modules communications can be established from meters to few Kilo meters long Distances. Transceiver modules have small form factor therefore they are easily accommodated in less space. Features   High Dynamic Range   Low Noise DFB Laser   ITU CWDM Compatible   LD / PD Monitoring ApplicationsWideband RF TransmissionAntenna RemotingDelay LinesRADAR GPS Over Fiber

Pickup tools One of the most important equipments required in any industry or laboratory involved in handling micro-objects is this Vacuum Pickup Tool. The equipment has been designed with an imported vacuum release valve for better control and reliability. The features of this instrument are at par with the international standards at a reduced price.

Optoelectronic devices is available in different models with varying specifications that meets the requirement of different users. The laser source is available either with single or dual laser source operating at 1310 & 1550 nm wavelengths. All the models are handheld units making it very handy for usage. Some of these products are type approved by TSEC, Govt of India.

Optical receiver module will convert the RF signals into Optical Signal.The optical Transmitter works on the principle of direct modulation. A typical link consists of an optical transmitter that receives the RF signal, transmits it over a single mode fiber to an optical receiver and reconverts the optical signal to RF. This Radio over Fiber Modules is suitable for Telecommunications, Antenna Remoting, Optical Delay lines & Radar Applications. These modules can be used as Optical Distributed Systems in Radar application. By using these modules communications can be established from meters to few Kilo meters long Distances. Transceiver modules have small form factor therefore they are easily accommodated in less space.

Optiwave has developed a wide range of optical power meters to meet the requirements of different types of users. The user can select the model based on his requirement. All the power meters are designed with advanced technology so that more features are incorporated at a low cost. Some of these products are type approved by TSEC, Govt of India. Features Available in different versions viz., handheld and benchtop. Alpha-numeric display with backlight or Organic color graphical display. Keypad with soft touch keys for smoother operation and long life. Can be operated with internal battery or ac power supply. The battery can be charged with adapter connected to instrument or with USB port. Operating over a wide wavelength range of 550 nm to 1700 nm. Wide power measurement range from +28 dBm to - 60 dBm. Power measurement in dBm or W mode, can measure absolute or relative powers. Auto Off of the unit for power saving and long battery life. Data can be stored, retrieved or can be printed directly. A rubber holster is provided to the instruments for additional protection  against falls.   ApplicationsOFC installation & maintenance OEM applicationsR&D applicationsCATVLAN, WAN maintenance

Optical light source is available in different models with varying specifications that meets the requirement of different users. The laser source is available either with single or dual laser source operating at 1310 & 1550 nm wavelengths. All the models are handheld units making it very handy for usage. Some of these products are type approved by TSEC, Govt of India. Features Users can select the model based on single or dual wavelengths of operation. Alpha-numeric display with backlight or Organic color graphical display. Keypad with soft touch keys for smoother operation and long life. Can be operated with internal battery or ac power supply. The battery can be charged with adapter connected to instrument or with USB port. The output power can be varied over a range of 6 dB or fixed. The output power of the laser diode can be displayed in dBm or mW. The laser output can be modulated at three different frequencies. Auto Off of the unit for power saving and long battery life. The instrument is provided with soft start for slow turn On & Off of the laser diode. Wavelength identification with the corresponding optical power meter. A rubber holster is provided to the instruments for additional protection against falls. ApplicationsOptical systems & device evaluationOFC installation & maintenanceOEM applicationsR&D applications    

the erbium doped fiber amplifiers (edfa) has generated a lot of interest in both optical communication industry and research community because of their inherent ability to directly amplify signals in the optical domain. Optiwave has developed one such optical amplifier based on edf. These amplifiers are available in different models to suit the customer's specific requirements. The unit is available in three different versions viz., 1u rack mountable that can be easily fixed in any standard 19" racks, gain block (msa) that can be used as a bench-top model and pump driver provided with only the pump drive electronics. features applicationsnetwork signal boostersdh/sonet systemscatvr&d applicationsoem application   the required model can be selected based on customer requirement.   the small signal gain can be up to +35 db.   the available output powers are from +10 to +23 dbm.   provision for co-propagating and counter-propagating of pump power.   the unit is provided with rs232 interface, lan interface along with snmp capabilities.   the user can set the required output power or define the pump laser drive conditions.   the unit is provided with redundant power supply, ac mains (90 to 250 v, 50 ± 2 hz) or -48 ± 4 v or +5v.

  Modular Test System is a one stop solution for laser diode characterization and device testing. This system is an upgraded version of our most popular OTS 5002 model. The user can incorporate two to four modules in one mainframe unit resulting in cost reduction, space and improved performance.  Features   Modular design with main frame & modules.   Large graphical display.   Keypad interface and knob for numeric & functional control.   RS-232C & USB interface with PC.   Maximum of four modules can be plugged-in.   Any combination of modules can be plugged.   Auto detection of different modules. The instrument can be fixed to a 19" rack.   The different modules that can be plugged-in Laser Diode ControllerThermo-Electric cooler ControllerOptical power meterOptical light sourceVariable optical attenuatorOptical switchPulsed laser driver ApplicationsR&D applicationsLaser diode characterizationOptical sensingEducational experiments

The demand for laser drivers has been rising upwards with time. This has resulted in a variety of laser controllers being developed. Thus the user has the option of selecting the laser controller that best suits their requirement.The controllers are available for CW or pulsed operation with very high currents. Features Highly stable. Compact design. User friendly. Modular designs compatible with our AOTS 5000 series. Laser safety features like slow turn On & Off, soft start are built-in. Available in different versions like PCB module, Bench top or 19" Rack Module. There is provision for RS-232 interface for monitoring & control of different parameters. ApplicationsOEM applicationsR&D applicationsDriving laser bars & arrays