Patient Monitoring System Dealers in Hyderabad

• Brand Name: Philips
• Resolution: 800 x 600
• Humidity Range: 20% to 85% Relative Humidity (RH) (non condensing)
• Altitude Range: 0 m to 3000 m (10000 ft)
• Battery storage: -20 to 50 Degree C
• Power consumption: 100 W
• Current: 1.6 to 0.7 A
• Refresh rate: 60 Hz
• Useful screen: 246 x 184.4 mm
• Pixel size: 0.3075 x 0.3075 mm

• Brand Name: EDAN
• Suitable For: Pediatric
• Lead Selections: 3
• Warm Up Time: 0 to 30 mins
• Usage/Application: Hospital
• Display Type: LCD
• Model Number: EDAN-elite V6

• Type of display: LCD
• Display Size: 8.4inch
• Brand: Comen
• Model: C60
• NIBP Measurement Technique: Step Deflation Oscillometric
• Weight: 2.8kg
• Power Supply: 240 V AC
• Size: 242x218x121mm
• Resolution: 800x600
• Trace: 4 Wave Form
• Huminity: 95%
• Battery Capacity: 31000 mAh
• Battery Type: Lethium-ion
• Interface: USB Port
• Accuracy: +-2bpm
• Heart Rate Range: 350bpm
• Sweep Speed: 55mm

This project aims at monitoring the patient’s health conditions continuously. The parameters like the blood pressure, temperature, heart beat are to be monitored continuously. In other words, the doctor will be diagnosing the patient continuously. This project uses the wireless concept, ZIGBEE. ZIGBEE is a specification for a suite of high level communication protocols using small, low-power digital radios based on the IEEE 802.15.4-2003 standard for wireless personal area networks (WPANs), such as wireless headphones connecting with cell phones via short-range radio. The technology defined by the ZIGBEE specification is intended to be simpler and less expensive than other WPANs, such as Bluetooth. ZIGBEE is targeted at radio-frequency (RF) applications that require a low data rate, long battery life and secure networking. The project is designed in such a way that, the analog quantities which are to be recorded continuously are taken and converted into corresponding digital values using an eight channel ADC. Here we consider temperature and pulse oxymeter sensors to monitor the temperature, blood pressure and heart beat respectively. The processed data from ADC is sent to microcontroller. The microcontroller continuously monitors the status of the sensors and the X-Bee transceiver will be interfaced to the microcontroller through serial communication to pass the corresponding sensors data to the control room PC. The Pc will be also interfaced with another X-Bee transceiver through serial communication. The doctor can continuously check the patient’s status by checking the parameters displayed on the PC and will take the immediate action if the parameters exceed the normal values. This project uses regulated 5V, 500mA power supply. Unregulated 12V DC is used for relay. 7805 three terminal voltage regulator is used for voltage regulation. Full wave bridge rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.   Micro Controller : AT89S52 Crystal : 11.0592 MHz zigbee Transcievers Temperature Sensor ADC Pc Software Requirements Keil Proteus Uc Flash Embedded C Prog Isp  

• Voltage: 20 V DC
• Parameters: ECG
• Display Type: TFT
• Resolution: 800*600 P
• Model: Rigid S8
• Continuously working for: 5.5 hours
• Charge Time: 2.5 hours
• Features: Waterproof design, resistance to dropping (1 meter), Low power consumption, fanless structure which creates no noise

Product Features:    * Made from non-toxic medical grade PVC.                                  * External diameter - 2.9mm, I.D. - 1.5mm.                                    * Pressure - 500 psi.                                          * Pressure monitoring line is transparent.                                                      * Length of pressure monitoring line with 3 way stopcock 10cm, 25cm, 50cm, 100cm.

• Accuracy: +-1 bpm or+-1 %, Whichever is greater
• SPO2 Measurement Range: 0-100%
• Pulse Rate Range: 20-254bpm
• Heart Rate Range: Adult 15-300bpm, pediatric / Neonatal 15-300bpm
• ECG Lead Selection: I, II, Ill, avR, avL, avF, v
• ECG Waveform: 2 Channels
• NIBP Method: Oscillometry
• NIBP Modes: Manual / Auto / Continuous
• NIBP Auto Measure Time: Adjustable
• ECG Measurement Range: 0.2mv-2.0mv
• SPO2 Accuracy: 70-100%, +-2% 0-69%, unspecified
• Pulse Rate Accuracy: +-3bpm
• Respiration Method: RA-LL impedance
• Respiration Range Adult: 0-120rpm; pediatric/neonatal 0-15rpm Apnea alarm yes
• Temperature Range: 0-50degC
• Temperature Accuracy: +-0.1degC
• Channel Dual: Channel
• Optional: Nellcore SPO 2 , ETCO 2 , IBP, Printer & Networking
• High Resolution: 12.1" or 8.4" color TFT display
• NIBP Measurement range: 10-270mmHg
• ECG Lead Mode: 3-lead Or 5-lead

we are offering multipara monitor, spo2,nibp,temperature ecg.

Patient monitor that shall draw cardiograms, measures blood pressure (invasive or not-invasive type), respiration values, temperatures at two spots, oxygen saturation in arterial blood ( spo2 ), and pulse rate ( hr ) . May be used to monitor patients on the transportation by using batteries, and the measured information on patient's condition shall be displayed in wave forms along with numerical values. Displayscreen display : colour tft display , screen diagonal curves and measured values : not less than 25.00cm . Up to 6 curves as well as numerical fields brightness: can be manually adjusted sweep speed : shall adjuste to 6.25, 12.5, 25 and 50 mms display pixels: at least 1024x768 monitor interfaces r-sync: for defibrillator , each r-wave shall be clearly identified , staff call: remote alarm via alarm adapter rs-232: as computer interface mainsbattery operation mains operation: shall be via built-in power supply battery operation: via integrated battery or charging console . Battery operating time: approx. Up to 4 hrs at least power supply : 220 v ac ±10%, automatic change-over power failure buffer : for trend values, system expansion software updates via interfaces monitoring parameters shall include : ecg, resp, ibp, nibp, spo2, pulse rate , dual-temp s-t segment synchronized detection and analysis graphic and tabular trends of all parameters for at least 96 hours 20-mn minimum ecg real time waveform and parameters storage and review shall be able to be connected with a central monitor station

multi para monitors, ICU Ventilators, Pulse Oximeters, monitors ecg machines

patient monitoring devices, Diagnostic Imaging & Xray Equipments, c arms

Patient Monitors, Fetal Monitor, Ultrasound Systems, X Ray Machines

multi para patient monitor, Color Doppler, Medical Equipments, Syringe Pump

pressure monitoring kit, Nebulizer Mask, Oxygen Masks

Patient Monitors, Defibrillators, intensive care unit beds, surgical staplers

Vital Signs Monitor Pulse Oximeter NIBP Monitor

pressure monitoring lines, Medical Devices, Medical Equipments

Medical Monitoring Equipment, surgical disposable face mask, stretchers

Patient Monitors, Blood Glucose Monitors, blood pressure monitors

pressure monitoring lines, cardiology equipments, ptca balloons

Patient Monitors, Medical Equipments, Syringe Pumps

medical grade monitor, Operation theatre Led Lights

Multi Para Monitor, Operation Theatre Lights, O T Table, Autoclave

Patient Monitors, Medical Equipments, X Ray Machine, ot equipments

Medical Monitor, Dual Head Stethoscope, Mri Scanner

Multipara Monitors, Ultrasound Machine, Tmt Machine, Mri Machine

Veterinary Patient Monitor, Reusable Pulse Oximeter Sensor

patient monitoring systems, Medical Equipments, Endoscopy, Ecg Machine