Pharmaceutical Dryers Dealers in Hyderabad

• Features: Easy to install , High functionality, Optimum performance , Smooth operation.
• Steam Pressure: 0.4 to 0.6 Mpa
• Capacity: 15kg to 500kg
• Material: Stainless Steel

Accurate Engineer’s Fluid Bed Processor is suitable for coating of fine drug pellets. These pellets are coated with the help of a Wurster design product chamber with bottom spray gun and partition in the centre of distribution plate. The air distribution plate is well designed to give uniform air flow for uniform coating without agglomeration.

Buyers can purchase Pharmaceutical Tray Dryers from us. High in quality and efficiency, our Pharmaceutical Tray Dryers are reliable in operation. The Pharmaceutical Tray Dryers that we provide are available in different specifications to attain maximum customer satisfaction. We have priced Pharmaceutical Tray Dryers fairly. In addition, we are a major Manufacturer & Supplier of Pharmaceutical Tray Dryers. Why Our Pharmaceutical Tray Dryers? Manufactured from quality materialFlawless constructionDurable Easy availability

We are offering fluid bed coater. Platinum fluid bed coater is suitable for coating of fine drug pallets. the pallets are coated with the help of a wrester design product chamber, with bottom spray gun and partition in the center of distribution plate. the air distribution plate is well designed to give uniform air flow for uniform coating without agglomeration. The pallets when coated with the solution will be lifted to such a height that they get fairly during by the time they reach the product chamber thus avoiding agglomeration. standard design features: all contact parts ss 316 all other parts ss 304 electric heaters steam heaters with inlet ahu advantages: coating is done with the minimum loss of spraying solution coating uniformity on pellets high efficiency drying operational time 60% of the coating pan time pellet stability improved. Zero pollution zero maintenance cost very economical description of equipment a bottom section jack box made out of ss 304g which connects the bottom of the product container to the inlet air plenum the bottom part of the inlet air section is equipped with a water drain port for easy cleaning & easy drain, a inlet butterfly damper valve flap close / opened function with a help of pneumatic actuator. ï�� inflatable gasket (silicon) arranged in bottom end of the expansion chamber, the inflatable gasket worked through plc panel which makes the system leak proof by symmetrically sealing the product container to expansion chamber, as well as bottom jack box to container sealing with container top & bottom joints. following features of machine parts:- product container with spray guns â�� 3,4 noâ��s ï�� product container made out of ss316 g, with view glass or window and over all conical shape to be suitable for container conical shape. Product container with product bed temperature port, sample taking port & quick disconnection to bottom perforated plate from the product container. ï�§ wurster product container made out of ss 316g doing with bottom section to facilitate fixing of spray nozzles 3 cylindrical partitions and perforated plate to be provided. Product container shall be provided with whurster cylinder located inside with sliding adjustment facility upto 40mm height. Ï�§ central bottom suction discharge port. Ï�§ 3head peristaltic pump with table trolley. product container trolley ï�� the trolley made out of ss 304g, with arrangement 4 noâ��s of castors (nylon / polyurethane) to support and mobility for the product container / wurster container. Castors housing made out of ss304g. nozzle chamber ï�� nozzle chamber is made out of ss304g, wurster spray guns are holding on the circumstances area. It will be easy removing purpose for spray gun nozzle. This chamber attached to the bottom of the product container. expansion chamber with charging port ï�� expansion chamber is made out of ss 316g, this chamber is using for drying & coating purpose. View glasses are fixing from the front side of the chamber, itâ��s used for observe the material status (drying, coating, shaking of the filter bag) in the chamber. ï�� its equipped with 3,4 nozzle port and control of panel prepared for fluied bed coating. The housing provided with view lamp matching view window for illumination. ï�� exhaust air ducts connected to the exhaust air duct work by a â��yâ�� junction connected with exhaust air temperature port located in the exhaust air duct including pt 100 sensor, pneumatically operated leak pipe close / open chamber flaps and one non leak tight pneumatically operated modulating exhaust air flap with the help of actuator and positioner. ï�� earthing system between machine and control panel upto operating terminal will be provided, all metal parts are properly grounded to lead any electrostatic charge to the grounding system. (main earthing point to be done by customer). ï�� suction inlet material charging port with butterfly damper valve flap close / opened function with a help of pneumatic actuator. mesh & filter housing chamber ï�� filter housing chamber allows continuous fluidization during the cleaning of filters and consists of pressure relief flaps one set of product filter assembly suspended on a stainless steel support ring with ss hocks. The lower end of the filters are sealed to the filter housing by using of inflatable gasket. Automatic pneumatic shaking system with each pneumatically operated shaking cylinder of the purpose of shaking filter, during the working process to remove fine material from the filter and to return it back to the product container. ï�� mesh housing chamber allows continuous fluidization during the changing & washing of mesh construction of electro pneumatically operated cylinder assembly suspended on a stainless steel eye bolt with clamping. Bottom of the mesh are sealed to the mesh housing by using inflatable gasket. explosion chamber ï�� explosion chamber top of the chamber of the equipment, made out of ss316g, it contains pressure relief disc horigentally along in a 2 bar upto 1.5mtr is part of the supply. A top lid will be arrange the top of the explosion chamber with easy removable accessibility. exhaust air blower ï�� ms centrifugal type powder coated from fan with ms hub statically and dynamically balanced. ï�� the fan or impeller is directly coupled to a 3phase squirrel cage induction motor through hub of the impeller (flp / non-flp). ï�� the fan housing is made out of ms with powder coated paint and equipped with a rigid plate as well as with a water drain point and cleaning window point. ï�� the blower is mounted on a base frame vibration absolves by using anti-vibrating pads. ï�� the inlet port of the fan is arrange with flexible connector during avoid the vibration of the blower to the machine. ï�� the blower motor starter (star & delta starter) are mounted in the separately supplied powder coated panel board. inlet air handling unit ï�� ahu unit made out of double skin ss304g body (panels) with puff insulation and structure construction is made out of aluminum section. ï�� inlet air filters (flange type) eu4 including door for easy access. ï�� face & bypass temperature controlling system to approach optimized temperature. ï�� inlet air heaters for steam tubes (seamless) and fins made out of ss304g. ï�� inlet air filters (flange type) eu7 door for easy access to arrangement of injues. ï�� differential pressure across eu7 is indication at that place. ï�� pneumatically operated on/off steam control valve to be installed in series connection of the pipe line as like as steam strainer are supplied by (platinum) remaining valves and taps are customer scope or end user. control panel with plc system ï�� plc panel with hmi touch screen. (mitsubishi plc) ï�� front panel / operating panel board made out of ss304g along with a printer equipped with a plc based controls for the fallowing functions :- ï�§ emergency push button station for emergency stopping of a machine and locking of machine off position. ï�§ this push button station is mounted on the front panel or support column. ï�§ machine operation pressure gauge for pneumatic accessories to be put on the front panel. ï�§ pressure gauges arranged in front panel to mentoring the sealing gasket pressure. .plc operations ï�� filter bag / mesh sealing with inflatable gasket. ï�� product container sealing with inflatable gasket. ï�� inlet air temperature control with pid. ï�� exhaust air temperature will be displayed. ï�� filter bag shaking on / off ï�� filter bag shaking duration ï�� filter bag shaking interval. ï�� steam on / off ï�� process on / off ï�� liquid pump on / off ï�� spray gun atomization air on / off ï�� interlocking alarms. the following electrical accessories are mounted in ms powder coated panel. ï�§ pneumatic components and controllers ï�§ pneumatic connectors & terminals ï�§ main switch ï�§ control transformer ï�§ motor star delta starter ï�§ over load relays ï�§ smps (switch mode power supply) ï�§ mcb (miniature circuit breaker) control panel with rlc system ï�� blower on/ off ï�� heating low / high (steam or electrical) ï�� product container sealing on / off ï�� spray gun air on / off ï�� spray gun air regulator with gauge ï�� display the inlet , outlet and product temperature. .

• Brand Name: spt fluid bed coater

We offer fluid bed coater 90 kg ,300kg, 500kg four spray gun model ,48 and 96 no tray drier ,48" coating pan ss tanks .

fluid bed coaters

Fluid-Bed Granulator Coater, steam coil, Revolving Coating Pan

Fluid Bed Coater, Powder Transfer System

Fluid Bed Coater, ROTOCONE VACUUM DRYER