Pneumatic Actuator Dealers in Balanagar, Hyderabad

• Electrical control :: 4 to 20 mA
• Pneumatic control :: 0.2 to 1 bar

NUCON Power cylinder ZNCN/29000 series consists of a double acting cylinder, positioner (either pneumatic control / Electro pneumatic control) and suitable link mechanism.   The mountings at rod end and cap end are customized.   NUCON Power cylinder has been designed to operate as an actuator in pneumatic control system to position the actuator in accordance with the control signal.   Design Features:     Wide range of bore sizes from 32mm to 14"       Strokes up to 1500 mm.       IS0 6431 standard cylinder from 32 to 200 mm       Above 200mm with NUCON standard/customized cylinder       Wide choice of rod end and cap end mountings       Linear characteristics are standard       Special characteristics are optional       Easy reversal action       Direction of piston movement in relation to signal can be reversed by the reversing the cam and rerouting the piping       Customized versions with additional accessories are on request     Additional Features:     Manual override attachment with clutch       Air-lock valves to obtain fail safe stay put position       Volume boosters to increase stroking rate       Limit switches       Position transmitters       Gaiter for piston rod protection   Material of Construction :   Cylinder Barrel   Aluminium alloy, fine drawn, calibrated, and hard anodized up to 200 mm Carbon-steel, finish honed and hard-chrome-plated above 200mm     Piston Rod   Stainless steel AlSl 420 up to 200 mm bore Medium carbon steel grade En8 above 200mm     End covers   Aluminium die casting up to 200 mm bore Cast-iron /Zinc plated Mild steel above 200 mm bore     Link mechanism   Zinc plated carbon steel     Seals   NBR (standard ) Viton (Optional on request)             Material of Construction :   The Power cylinder is a standard pneumatic cylinder whose stroke positioning is regulated by pneumatic/electro-pneumatic feed back signal. The stroke positioning is made by altering electro pneumatic control signal value (4 mA for zero stroke and 20 mA for full stroke). In between stroke is proportional to the band width of 16mA. Similarly in Pneumatic control positioning the signal of 0.2 bar for Zero stroke and 1 bar for full stroke   The Positioner and the Link mechanism are fitted on the top of the cylinder with a rigid bracket. The link mechanism is connected to the piston rod. The feed back cam moves along with the piston rod and provides the feedback signal to the positioner to position the cylinder in line with the control signal     Accessories :   All standard mountings and accessories are available to customer's choice.  

• Size: 150-200mm, 200-250mm
• Material: Stainless Steel
• Pressure: High
• Feature: Blow-Out-Proof, Corrosion Proof, Durable
• End Connection: Butt Weld, Screwed
• Input Signal: 4-20mA(two wire)

The TZIDC represents the digital, intelligent positioner for communication via HART within the positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.   General specifications:  Digital HART communication    Easiest commissioning and operation on site due to local operation and auto adjustment   Worldwide Intrinsic Safety approvals  Robust design and flexible in use with linear and rotary actuators  Remote sensor version – Advanced vibration resistance 2 g, 300 Hz – Protection class IP 67  

Damper Actuator, slide gate plate, v block, Ceramic Roller, Crucibles

An I/P module with consequent pneumatic intensifier is utilized to control the pneumatic actuator. The well-demonstrated I/P module relatively changes over the lasting electrical setpoint motion from the CPU into a pneumatic flag used to change a 3/3-way valve. The wind current for pressurizing or depressurizing the actuator is persistently balanced. Subsequently, fantastic control is accomplished. When achieving the set point, the 3/3-way valve is shut in focus position to limit the air utilization. Four diverse pneumatics adaptations are accessible: for single-acting or twofold acting actuators, each with "safeguard" or "come up shortstop" work.

• Type: Smart,Pnuematic
• Application: All type of valves
• Input: 4-20mA
• Communication: With/Without Hart

General specifications: digital hart communication easiest commissioning and operation on site due to local operation and auto adjustment worldwide intrinsic safety approvals robust design and flexible in use with linear and rotary actuators remote sensor version � advanced vibration resistance 2 g, 300 hz � protection class ip 67.

Damper Actuator, Cable Tray Covers, plunger rod

Positioner Cylinder, standard filters, Inswing Door, Square Barrel Cylinder