positioner
Get Price Quote
The TZIDC represents the digital, intelligent positioner for communication via HART within the positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions. General specifications: Digital HART communication Easiest commissioning and operation on site due to local operation and auto adjustment Worldwide Intrinsic Safety approvals Robust design and flexible in use with linear and rotary actuators Remote sensor version – Advanced vibration resistance 2 g, 300 Hz – Protection class IP 67
Electric Valve Damper Actuator
Get Price Quote
We are a professionally managed manufacturer, exporter and supplier of Electric Damper Actuator. The offered devices are reversible gear motors, that are widely used to operate valves or dampers in electric balancing circuits. These motors are precisely manufactured to meet various requirements of valve control, damper control applications. Our devices are used to drive the current through one complete circuit and to break it in a prompt manner. The VAM version is offered with standard adjustment option and VAO is without it. Moreover, Our Electric Valve-Damper Actuator are used for large scale application and their maximum torque is 2000 kg-cm at the speed of 0.02RPM. Features: Stroke is field adjustable and fixed at 90°, 1600°, or 2700°. Models can be equipped with potentiometer for accurate feed back and proportional 4- 20mA regulation in conjunction along with extended control. Offered with internal cam adjusted high quality auxiliary switches. Electro magnetic brake can be provided for instant stop and avoid any back drive from the valve. The motor winding is outfitted with thermal switches to prevent burn out during over heating. The motor starts again only when it is cooled. Specification: Motor Supply Voltage : 110230460 VAC, 13 , 5060 Hz. Power Consumption : 90 Watts (max.) Potentiometer (POT) :135 1.0 k , 1 Watt, Single turn (The maximum permitted power dissipation for this POT is 1W for 900). Positioner : 4-20mA IP & OP. Brake Supply Voltage : 230 VAC, 1 , 5060 Hz. Stroke : Factory set at 900. Auxiliary Switch : 230VAC, 16 Amps.
Best Deals from Pneumatic Actuator
Electro-Pneumatic Positioner
84,524 Per Piece
An I/P module with consequent pneumatic intensifier is utilized to control the pneumatic actuator. The well-demonstrated I/P module relatively changes over the lasting electrical setpoint motion from the CPU into a pneumatic flag used to change a 3/3-way valve. The wind current for pressurizing or depressurizing the actuator is persistently balanced. Subsequently, fantastic control is accomplished. When achieving the set point, the 3/3-way valve is shut in focus position to limit the air utilization. Four diverse pneumatics adaptations are accessible: for single-acting or twofold acting actuators, each with "safeguard" or "come up shortstop" work.
Positioner Cylinder
Get Price Quote
NUCON Power cylinder ZNCN/29000 series consists of a double acting cylinder, positioner (either pneumatic control / Electro pneumatic control) and suitable link mechanism. The mountings at rod end and cap end are customized. NUCON Power cylinder has been designed to operate as an actuator in pneumatic control system to position the actuator in accordance with the control signal. Design Features: Wide range of bore sizes from 32mm to 14" Strokes up to 1500 mm. IS0 6431 standard cylinder from 32 to 200 mm Above 200mm with NUCON standard/customized cylinder Wide choice of rod end and cap end mountings Linear characteristics are standard Special characteristics are optional Easy reversal action Direction of piston movement in relation to signal can be reversed by the reversing the cam and rerouting the piping Customized versions with additional accessories are on request Additional Features: Manual override attachment with clutch Air-lock valves to obtain fail safe stay put position Volume boosters to increase stroking rate Limit switches Position transmitters Gaiter for piston rod protection Material of Construction : Cylinder Barrel Aluminium alloy, fine drawn, calibrated, and hard anodized up to 200 mm Carbon-steel, finish honed and hard-chrome-plated above 200mm Piston Rod Stainless steel AlSl 420 up to 200 mm bore Medium carbon steel grade En8 above 200mm End covers Aluminium die casting up to 200 mm bore Cast-iron /Zinc plated Mild steel above 200 mm bore Link mechanism Zinc plated carbon steel Seals NBR (standard ) Viton (Optional on request) Material of Construction : The Power cylinder is a standard pneumatic cylinder whose stroke positioning is regulated by pneumatic/electro-pneumatic feed back signal. The stroke positioning is made by altering electro pneumatic control signal value (4 mA for zero stroke and 20 mA for full stroke). In between stroke is proportional to the band width of 16mA. Similarly in Pneumatic control positioning the signal of 0.2 bar for Zero stroke and 1 bar for full stroke The Positioner and the Link mechanism are fitted on the top of the cylinder with a rigid bracket. The link mechanism is connected to the piston rod. The feed back cam moves along with the piston rod and provides the feedback signal to the positioner to position the cylinder in line with the control signal Accessories : All standard mountings and accessories are available to customer's choice.
Pneumatic Actuators
Get Price Quote
Our organization is topmost provider of Pneumatic Actuators to our clients. These actuators are able to give the best performance for years. These actuators are hailed for their quality performance for years. These actuators are based on the latest technology and are designed as per the requirements. These Pneumatic Actuators are offered in both customized and non customized options to our clients.
Electro Pneumatic Valve Positioner
47,999 Per Piece
1 Piece(s) (MOQ)
General specifications: digital hart communication easiest commissioning and operation on site due to local operation and auto adjustment worldwide intrinsic safety approvals robust design and flexible in use with linear and rotary actuators remote sensor version � advanced vibration resistance 2 g, 300 hz � protection class ip 67.
Damper Actuator
Get Price Quote
Damper Actuator, AHU Valve, FCU Valve, CO Sensor
Damper Actuator
Get Price Quote
Damper Actuator, slide gate plate, v block, Ceramic Roller, Crucibles
Damper Actuator
Get Price Quote
Damper Actuator, Dissolved Oxygen Analyzer, chlorine analyzer
Industrial Automation Valve Positioner
Get Price Quote
Industrial Automation Valve Positioner
Electronic Rotary Actuator
Get Price Quote
we are offering electronic rotary actuator. electronic rotary actuator is suitable for bs-ii to bs-iii of petrol, diesel and lpgcng vehicles ). this product is developed to suit for bs-ii, bs-iii vehicles, which runs on alternative fuels like lpg, cng where accelerate cable is restricted to a set speed even the additional force applied by the driver to accelerate the vehicle. the sld have an opposite force of the motor which remains the speed for the set speed.
Damper Actuator
Get Price Quote
Damper Actuator, Cable Tray Covers, plunger rod
Pneumatic Rotary Actuators
Get Price Quote
Pneumatic Rotary Actuators, Safety Shut-off Valve
Positioner Cylinder
Get Price Quote
Positioner Cylinder, standard filters, Cartridge Filters, Inswing Door