Powder Mixers Dealers in Hyderabad

We are offering ribbon blander. Here, you can add new products, along with detailed information. Fill in the details accurately and upload a clear image with a close-up of the product.

We are offering double cone dryer, blender etc.this type of dryer is, to some extent, replacing the agitated rotary vacuum dryer. It has two opposing jacketed cones on a common jacketed short cylindrical base. When the cones are in a vertical position the dryer can be rapidly discharged. The unit is provided with supporting trunnions running on suitable bearings. The trunnions are hallowing. A vacuum connection is made through one of the trunnions. The connection pipe is turned upwards in the cone and is fitted with a dust filter as its end. Inlet and outlet pipes pass through the outer trunnion for the supply of suitable heating medium to the jacket. A special design of a rotating valve is used for this purpose. One of the trunnions is driven through a reduction gear and chain drive. rotation speed will range from 12 rpm for small units to 3 to 4 rpm for large commercial installations. the horse powers vary between 0.5 and 15 the base cylinder diameter is about 1m to 3m.

double cone blender (pbxdcb) is ideal for mixing of powders and homogenous lubrication of granules. Cones are manufactured out of ss 316 quality sheet. To enhance the missing, paddle blades are provided on central shaft. Drive motor is connected to a gear box on ss rigid stand. Charging height varies as per the capacities. Suitable opening for charging with ss cover and lock nuts, discharge port is fitted with mucon/butterfly valve which helps to unload powder faster. Pipe guards provided with limit switch interlocking to motor, which ensures safe operation for higher capacities. Two-thirds of the volume of the cone blender is filled to ensure proper mixing.

• Automatic Grade: Semi-Automatic
• Condition: New
• Application: Powder
• Design Type: Customized
• Categories: Mixing equipment
• Power load(hp): 3-5 HP

ribbon blender comprises of a u-shaped horizontal trough and a specially designed double helical ribbon agitator rotating within. ribbon blenders are based on a proven agitator construction that provides a triple mixing action ensuring fast, efficient blending. our qualified technicians specially designed and configure the ribbons and are also carefully balanced to provide a movement of material within the container that avoids dead spots and gives rapid product discharge.

By following a strict selection process, we source the entire range of raw materials from the certified vendors. Thus, we make sure that our finished goods will be flawless. Backed by a team of proficient quality inspectors, we provide only quality assured products to the customers. Our ribbon blender mixer is available with a working speed of 300rpm. 

We are offering double cone blender. Double cone blender for mixing powders capacity 100 kg to 1000 kg per batch

We offer double cone blender that is used in assortment of industries. It is an efficient and versatile machine used for mixing dry powder and granules homogeneously. All the contact parts of the blender are made from SS with grades as required by customers. Our double cone blender offers uniform mixing and easy discharge of material. The double cone blender is applicable for Pharmaceutical, Food, Chemical and Cosmetic products.

The mixer basically consists of two conical portions and a center cylindrical shell. The cone blenders provided with fixed baffles inside the drum. The double cone blender is an highly efficient machine for powder / powder mixing. The main drum is coupled to suitable motor through a oil filled gear box mounted on a sturdy frame structure. Highest capacity models are provided with butterfly valve on one side.   An optional charging hopper of 60 Ltrs capacity is provided with suitable clamping arrangement for charging the material into the drum.The double cone blenders are available from 5 kgs of R&D purposes to 500 Kgs for larger scale productions.

The platinum pharmatech ribbon blendercomprises of a u-shaped horizontal trough and a double helical ribbon agitator rotating within. Ribbon blenders are based on a proven agitator construction that provides a triple mixing action ensuring fast, efficient blending. The dimensions and configuration of the ribbons are well balanced to provide movement of material within the container and prevents dead spots and delivers rapidly the product.

The double cone blender consists of two cone shaped sections with 45º slopes. The cone sections are welded at their wide ends to a centre band. The blender is mounted between two trunnions that permits the unit to tumble end over end. In operation, material is loaded to a fill level of 50 to 60 % of the blender’s capacity.   The blender tumbles and the material in the vessel spreads out. The transition area at the band between the cones prevents the material from sliding along the inner wall and instead causes the material to fold over itself. This provides gentle mixing with only very slight shear.   The blender is ideal for soft powders of granules that degrade by attrition. The smooth transition area in the vessel also simplifies cleaning because there are no areas to trap particles and cross-contaminate batches. Contra rotary baffles with mechanical seals at both ends can be provided for critical mixing applications.   SALIENT FEATURES  he conical shape at both ends enables uniform mixing and easy discharge. All contact parts are made out of stainless 304 or 316 quality material, as required by customer. Maximum care has been taken to ensure safe operation of the unit. Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model ) Two nos. of safety road will be provided at back side. ( One LH side & one RH side ) Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning. One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone. Cone will be mirror polished from the inside & outside & structure will be matt polished.  All moving parts covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch. Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter. As per customer requirement machine will be provided with left side drive or with right side drive. The conical shape at both ends enables uniform mixing and easy discharge. Worm reduction gear use for speed reduction. Food grade rubber gasket will be used on both end of cone as well as in butterfly valve. Inside & outside of the cone will be polished to the mirror finished.   All safety guards & covers made out of SS304 in GMP Model.

The Royal Crown Engineering dry powder shear ribbon mixer is suitable For any powder cement based putty and any cement bound products. The Royal Crown Engineering is a horizontal shapped mixer and contains Milti- Ribbon with high speed shear impellers..

• Capacity (kg/batch): 100-4000
• volume(cubic meter): 0.2-8

We are offering double circle paddle mixer. Muyang double-circle paddle mixer has mixing homogeneity of97.7%(i.e. Cv value =2.3%), natural residue percentage of0.1%, and unit power consumption of0.30kw*ht. Muyang double-circle paddle mixer is independently researched and designed by muyang and wins international patent technologies. It has advantages of quick mixing time,high homogeneity and no residues. ■ high homogeneity international patent double-circlerotor design, inside and outside double-circle paddle design, reinforcing convection, shearing, and mixing effects.mixing homogeneity is up to 97.7%. ■ no residues adjustable gap between paddle and casing, ensuring extremely low residue ratio, avoiding materials cross contamination; fully open discharging gate, mixed materials are discharged completely in no time, no residue. ■ zero leakage discharging gate is sealed with rubber air bag,realizing zero leakage;at the shaft ends, the packing seal is specially designed to ensure zero leakage. ■ human friendly the 14px access door in reasonable design, ease of cleaning and time saving; elevating type liquid addition device "air atomization" contributes to high-precise addition,which ensures homogenous mixing without generating any agglomeration.

Specifications 1.Efficient in Mixing of different powders, dry & wet ingredients 2.Suitable for mixing pickles 3.Capacities 100 to 3,000 lts     Features:   Efficient in proper mixing of different powders, dry & wet ingredients. Made of best grade raw material. Suitable for mixing pickles, pre-cooked dal ready-to-eat mixes and chemicals. Available in capacities ranging 100 lts to 3,000 lts. Plant

Most versatile and efficient machine for mixing fine & coarse powders to homogeneous mixture. Manufactured with precision and accuracy. We have range of products like ribbon blender, paddle mixer, conical mixer, mass mixer, sigma mixer etc. To suite different material and applications. Applications: foods, spices, pickles, premix, poultry & animal feed, mosquito coil, herb & plant material, mineral, chemical and pharmaceutical industries etc. Capacity: available in different minimum and maximum capacities ranging from 50 to 3000 kgbatch depending on bulk density of material. These machines are manufactured in both mild steel and in stainless steel, grade ss 304 or ss 316. Model: ammxr 50 liters, 100 liters and upto 3000 liters volume.

Ribbon Blender is designed for rapid and thorough blending, to eliminate product stagnation and rapid action the opposite ribbons rolls, tumbles and pushes the product in opposite direction longitudinally from both ends. The flow of material in opposite direction results in uniform and fast mixing. Seals: A Teflon bush, Oil seal and gland packing is provided to avoid leakage. (Silicon seal optional) Drives: The blender is provided with a suitable reduction gear box and motor to achieve required RPM     Features   Ribbon blender shell made of stainless steel The lid has 3 piece segment with fixed center piece and hinged cover at either sides for charging of products The lid has 3 piece segment with fixed center piece and hinged cover at either sides for charging of products The main shaft made of stainless steel on which the ribbons are welded The ribbon are made of stainless steel flats with suitable size and thickness depending up on the capacity

• Feature: Longer service life, Rust resistant, Efficient performance
• Application: Pharmaceutical Industries, Food Industries
• Material: Stainless Steel
• Automatic Grade: Semi-Automatic
• I Deal In: New Only
• Orientation: Horizontal
• Heat Exchange: Find tube heat exchangers and hot air generators
• Is It Corrosion Resistant: Corrosion Resistant

Ribbon Mixers, reaction kettles, Autoclaves, columns, blenders, Dryers