Power Supply Accessories Dealers in Ecil, Hyderabad

SPECIFICATIONS FOR +/-15V/3A D.C. POWER SUPPLY 1 INPUT : 230V AC +/- 10%, single Phase 2. OUTPUT : +/-15V DC, 3A 3. LINE REGULATION : Less than 0.1% for change in input voltage from 207V to 253 V 4. LOAD REGULATION : +/-0.1% for change from no load to full load and vice versa 5 RIPPLE : Less than 5mV RMS 6 DRAFT IN 24 Hrs. : Less than 25% 7 OUTPUT VOLTAGE ADJUST: +/- 5% of rated output. 8 PROTECTIONS : Output will be protected against over loads, over voltages and continuous short circuits. 9 INDICATIONS ; One LED each to indicate the availability of DC outputs. 10 TERMINATIONAS : Input is given through a Circular connector and output is given through a PIRI Terminal. 11 OPERATING TEMP : 0 to 55 Degree 12 MECHANICAL SIZE : 3U Height X Half 19� Rack width x less than 300mm depth.Two units fitted in full 19� Rack. 13 RELATIVE HUMIDITY : 0 to 90% without condensation. 14 TEMP. COEFFICIENT : Less than 0.025% per Degree C.

Description BM101 Series of Power Supplies are the mains operated power supplies used for powering wireless sets of both UHF & VHF. They are the dual output Power supplies. They supply power to wireless set and at the same time charges the battery. These are designed with high frequency switching technology which makes them highly reliable, cost effective, compact in size and light in weight. Salient Features 1. Wider input range, reduced size and weight. 2. Current mode MOSFET based design, higher efficiency, low heat dissipation. 3. Separate battery terminals with charge current limit to enhance battery life. 4. Proven field reliability for more than 12 years. 5. Protected against Short Circuit, Over load and Output over voltage.

Growcontrols has developed LASER Power Supplies for flash lampArc lamp based LASER systems and Diode LASERS. We have also developed Q-Switch driver, TEC Controllers and other subsystems for LASER application. Features Solid-State Design Diode Laser DC Power Supplies TEC Controller PFN Networks for Discharge Lamps Q-Switch Driver

HTC DC-3002-II Regulated Power Supply We are dealing with Power Regulated Supply.

3 PHASE POWER SUPPLY is a Switch Mode Power Supply (SMPS) designed to meet the power requirements of data transmitting equipment. The model with Super Capacitors provides the backup in case of AC mains off, to send the data.

• Type: Open Frame Smps
• Certification: ISO 9001:2008
• Application: Power Converting
• Weight: 100-200gm
• Color: Black
• Voltage: 220V, 440V
• Warranty: 1year
• Country of Origin: India
• Brand Name: SIRI POWER PRODUCTS

Saiber energy conversion systems (secs) is offering a wide range of uninterrupted power supply from india.

• Application: Electronic Instruments
• Brand Name: DEH
• Output Voltage: 30V DC, 2Amps Dual Channel type
• Warranty: 1 Year
• Country of Origin: Made in India
• Features: Low Ripple Voltage, Excellent Line and Load Regulation, Large Display, Selectable display for Voltage & Current, Fuse Protection for overload.
• Maximum Input Voltage: 240V AC, 50Hz
• Input Voltage: 230V AC, 50Hz
• Display Type: Digital

Power Supply For Internet Module, Smps Power Supply Cum Battery Charger

We are engaged in supplying high-quality Switch Mode Power Supply. We fabricate Switch Mode Power Supply as per the industrial standards under the supervision of our experts. Our Switch Mode Power Supply is endowed with all the latest features that have led to its popularity amongst the clients. We offer Switch Mode Power Supply at reasonable prices. Highlights : Precisely designedLong service lifeHigh performanceEnergy efficient SpecificationsInput Specifications Operating Voltage 230 VAC, 50 Hz.Operating Voltage Range 160 to 270 VAC.Frequency 47 to 53 Hz.Input Current 2.7 amps maximum.Power Factor 0.80   (Typ).Efficiency 88%  (Typ).Die electric Strength 1.5KV AC (I/P to O/P & Case).Out Put Specifications  Out Put Voltage 54 VDC.Out Put Voltage Adjustment Range 48 to 54.5 VDC.Out Put Current 6.25 amps.Out Put Current Limit 7.25 amps maximum.Out Put Power 350 WattsOut Put Ripple Less than 300 mV peak to peak.Out Put Regulation 0.5 V.Psophometric Noise 2 mV RMS.Audible Noise 50 db.Other SpecificationsIndication AC ON : Red LEDDC ON : Blue LEDDimensions 220 (H) x 86 (W) x 250 (D) mm.Weight 2 kgs.Input Connector 3 pin mains chordOutput Connector 4 pin terminal block.

open frame smps, ac adapters, Battery Chargers, closed frame smps

power supply smps, SMPS Transformers, Power Supply Transformer

Uninterrupted Power Supply, Inverters, Voltage Stabilizers

SMPS, Smps Ac-dc Adaptors, Battery Chargers, dc dc converters, Led Drivers

Uninterruptible Power Supply, Transformers, Solar Street Lighting System

Uninterrupted Power Supply, ups systems, Stabilizers, Servo Stabilizers

Rack Power Supplies, Laptop Adapters For Laptop, AC-DC Adapters

Uninterrupted Power Supply, Battery, Inverter, Servo Stabilizer, Ups

SMPS, Dc Fans, Home UPS, Solar Battery, Solar Fans

laser power supplies, Traction systems, high voltage switches

Uninterruptible Power Supply, Transformers, Stabilizers, Voltage Stabilizers